74 Chiller Operator Chiller Technician jobs in Qatar

Objective/ Purpose of the role

Repairs/installs and maintains Aerial Work Platform equipment in a safe and professional manner, including DC electrical systems, hydraulic systems, & associated equipment, as well as mechanical equipment such as engines, motors, and sub-assemblies, by performing the duties listed below:

The senior technician serves as an advanced level worker performing the most complex assignments, and also provides technical assistance in diagnosis and repair of Aerial work platforms.

This position requires an employee to possess a high degree of independent judgement in making decisions without availability of supervision, also schedules work, monitors quality, efficient and cost effective approach in doing task and valued customer relations.

Organisational Structure

Reports to Depot Manager – Qatar

Representative Duties

• Performs a variety of duties related to the maintenance and repair of AWP’s.
• Performs preventive maintenance of AWP’s in accordance with the manufacturer recommendations and Manlift service schedules.
• Prepare and maintain a variety of written records and reports, reads and interprets plans and specifications.
• Responds to customer inquiries in a courteous manner, provides information within the areas of assignment.
• Work safely and adhere to safe work practices and procedures in accordance with the TMW (The Manlift Way).

Tasks and Responsibilities

• Maintain positive customer relations through professional interactions with customers.
• Responsible for the safe maintenance and repair of a variety of Aerial Work Platforms and associated equipment, which utilise mechanical, diesel, electrical and electronic systems.
• Installs and repairs mechanical, hydraulic or electrical parts such as hydraulic cylinders, engine parts, switches, controllers and associated components.
• Dismantles devices to gain access to and remove defective parts
• Examines form and texture of parts to detect imperfections
• Lubricates and cleans parts
• Starts / operates devices to test their performance
• Sets up and operates repair equipment and repair parts according to instruction & procedure
• Diagnose, and carry out preventive maintenance according to manufacturer's, and Manlift requirements, as well as faultfinding, troubleshooting, and attending breakdowns on all equipment in rental and sales fleet.
• Reads, follows, understands oral and written instructions.
• Issue “Field Service reports and “service work orders” on maintenance tasks and faults, and the parts, labor and time taken to complete the task.
• Operates equipment, demonstrates and familiarizes customers when necessary.
• Inspects used parts to determine imperfections or changes in dimensional requirements
• Adjusts functional parts of devices and control instruments & repairs or replaces defective parts & components
• Installs special functional and structural parts in devices & equipment.
• Reads, follows, understands and communicates schematic drawings, service and parts manuals.
• Calibrate equipment using electronic aids and procedures and programmable controllers.
• Troubleshoot and Inspect machine (mechanical, electrical and hydraulic components) to detect faults and malfunctions.
• Work individually and will lead a team in major repair and maintenance.
• Flexible in responding to changes in schedules and scope of job required on all Manlift equipment.
• Travel extensively as workload and schedule demands change, and respond to 24 hours emergency calls in an efficient and timely manner to effect immediate repairs.
• Understand and prioritize work plans to complete assignments with quality work and minimum supervision.
• Provides instructions and training in the proper methods and processes necessary to perform equipment repairs, inspection and preventive maintenance.
• Implement, recognise and propose tools necessary to complete the task in safe, efficient and shortest possible time.
• Plan, schedule preventive and routine maintenance according to manufacture and Manlift requirements, as well as fault finding, troubleshooting, diagnostics and associated breakdowns on all Manlift equipment
• Understand and prioritize work plans to complete assignments with quality work, cost effective, responding to emergency situations in an efficient and timely manner to effect immediate repairs.
• Analyze existing work procedures and develop a plan to improve ways to provide efficient, time saving and cost effective approach processes.
• Perform a variety of specialized maintenance and repair work assigned such as – major overhauls of Engine, Hydraulic pumps & cylinders, Rotary coupling, swing drive, torque hub and other mechanical components.
• Repair electrical components such as starter motors, alternators, and various controllers used on the AWP’s.
• Test and perform pressure setting procedures of function pump, control valves, charge & pressure valves, Engine valve lash adjustment.
• Use testing and measuring instruments to Test, analyze, calibrate and adjust/ upgrade JLG control system, Genie generic system, Teupen TODAC system, EZcal on MEC, Snorkel & Skyjack machines.
• Read and interpret basic hydraulic & electrical schematic and troubleshoot faults on various AWP’s.
• Carry out major refurbishment work of AWP’s which involves replacement of boom/scissor assembly and major components.
• Periodic safety, operation and maintenance inspection of machines at various sites.
• Install track and trace equipment on AWP’s and upgrade equipment system performance in accordance with manufacturer's safety notice.

Details of more specific additional duties: (Including but not limited to :)

• Applying approved methods of work & repair practices. Alternative methods will be considered after consultation. An example of approved procedures for the maintenance and repair of equipment is the “Service Work Order”.
• All Technicians involved in “On site servicing” & “Breakdowns”, must adopt & use the approved procedure only. Examples of some of these procedures are; the correct use & completion of “Field Service Reports”, correct phone procedure, & the polite communication with clients at all times.
• Any parts replaced must be recorded on the approved “service work order” or “Field service reports”.
• All parts that are replaced under warranty must have the appropriate paperwork completed as soon as the part has been used. (Determination of warranty status can be obtained from the Workshop Manager).
• All tools used must be operated in the manner for which they were designed; looked after and returned to their correct location at the end of the working day.
• All work practices must be safe. Applicable “Personal Protective Equipment”, such as Safety glasses & hearing protection, must be used at all times where applicable.

Physical Demands and Working Environment:

• Primary functions require sufficient physical ability and mobility to work in a field environment and make repetitive hand movement, heights on ladders, to lift, carry, push and or pull moderate amounts of weight, to operate/test the assigned equipment, and communicate to exchange information.
• Vision should see in the normal visual range with or without correction. Vision sufficient to read computer screens and on board digital controller screens and schematic drawings.
• Hearing in the normal audio range with or without correction.

Key Competencies

• Flexibility - Communication skills
• Organisational skills - Problem Solving
• Teamwork / Independence

Requirements

• Degree or diploma in engineering/ 6 - 8 years of increasingly responsible maintenance and repair experience in AWP’s or related equipment.
• Experience & knowledge of diagnostic equipment, and procedures.
• Good knowledge of English, both written and spoken. Knowledge of an additional language is an asset.
• Quick learner, eager to learn and develop.
• Valid Qatar driving license.
• IPAF certification.

The Company

Manlift is an international company specialising in renting and selling aerial work platforms and related machinery of renowned brands which include JLG, Genie & Teupen among others. Over the years, Manlift has grown into a specialist in the area of working safely and efficiently at heights across the UAE, Qatar and India. By continuously investing in people, quality and innovation, Manlift has become a leading international player. With its international operation and support, Manlift can offer its customers the best possible service wherever they are.

Manlift is among the most forward-thinking, innovative and proactively safe Aerial Work Platforms specialists in the world not only renting and selling units from 2m-50m but also holding a large inventory of first-class spare parts to support the ever-growing numbers of after-sales service agreements. Furthermore, Manlift considers working safely and efficiently at heights of paramount importance. As such, Manlift's Purpose-built and certified IPAF training facilities have been training individuals to international standards and codes of practice since 2010.

Manlift, although relatively young, has a rich and successful history. Its primary objectives are to be attentive to its customers and to maintain a bond with them. In spite of its international growth and development, Manlift has remained small in character. This is evident in all of our product offerings, fast service, reliability and sincere attention to the customer. We compete with our platforms, we win with our people.

The Manlift Way

To ensure that we always deliver the best customer experience, we’ve implemented efficiency measures focusing on continuous improvement at all stages of the rental cycle. And as a result, our customers benefit in terms of:

• Safety
• Machine availability
• On-time machine delivery
• Fast pick up
• High machine uptime
• Invoice accuracy

One essential feature of this approach – which we call the “Manlift Way” – is that it enables us to constantly monitor and improve key performance indicators across our entire network of its depots, again with the aim of delivering the best customer experience.

Job Type: Full-time

#J-18808-Ljbffr

Objective/ Purpose of the role

Repairs/installs and maintains Aerial Work Platform equipment in a safe and professional manner, including DC electrical systems, hydraulic systems, & associated equipment, as well as mechanical equipment such as engines, motors, and sub-assemblies, by performing the duties listed below: The senior technician serves as an advanced level worker performing the most complex assignments, and also provides technical assistance in diagnosis and repair of Aerial work platforms. This position requires an employee to possess a high degree of independent judgement in making decisions without availability of supervision, also schedules work, monitors quality, efficient and cost effective approach in doing task and valued customer relations. Organisational Structure

Reports to Depot Manager – Qatar Representative Duties

Performs a variety of duties related to the maintenance and repair of AWP’s. Performs preventive maintenance of AWP’s in accordance with the manufacturer recommendations and Manlift service schedules. Prepare and maintain a variety of written records and reports, reads and interprets plans and specifications. Responds to customer inquiries in a courteous manner, provides information within the areas of assignment. Work safely and adhere to safe work practices and procedures in accordance with the TMW (The Manlift Way). Tasks and Responsibilities

Maintain positive customer relations through professional interactions with customers. Responsible for the safe maintenance and repair of a variety of Aerial Work Platforms and associated equipment, which utilise mechanical, diesel, electrical and electronic systems. Installs and repairs mechanical, hydraulic or electrical parts such as hydraulic cylinders, engine parts, switches, controllers and associated components. Dismantles devices to gain access to and remove defective parts Examines form and texture of parts to detect imperfections Lubricates and cleans parts Starts / operates devices to test their performance Sets up and operates repair equipment and repair parts according to instruction & procedure Diagnose, and carry out preventive maintenance according to manufacturer's, and Manlift requirements, as well as faultfinding, troubleshooting, and attending breakdowns on all equipment in rental and sales fleet. Reads, follows, understands oral and written instructions. Issue “Field Service reports and “service work orders” on maintenance tasks and faults, and the parts, labor and time taken to complete the task. Operates equipment, demonstrates and familiarizes customers when necessary. Inspects used parts to determine imperfections or changes in dimensional requirements Adjusts functional parts of devices and control instruments & repairs or replaces defective parts & components Installs special functional and structural parts in devices & equipment. Reads, follows, understands and communicates schematic drawings, service and parts manuals. Calibrate equipment using electronic aids and procedures and programmable controllers. Troubleshoot and Inspect machine (mechanical, electrical and hydraulic components) to detect faults and malfunctions. Work individually and will lead a team in major repair and maintenance. Flexible in responding to changes in schedules and scope of job required on all Manlift equipment. Travel extensively as workload and schedule demands change, and respond to 24 hours emergency calls in an efficient and timely manner to effect immediate repairs. Understand and prioritize work plans to complete assignments with quality work and minimum supervision. Provides instructions and training in the proper methods and processes necessary to perform equipment repairs, inspection and preventive maintenance. Implement, recognise and propose tools necessary to complete the task in safe, efficient and shortest possible time. Plan, schedule preventive and routine maintenance according to manufacture and Manlift requirements, as well as fault finding, troubleshooting, diagnostics and associated breakdowns on all Manlift equipment Understand and prioritize work plans to complete assignments with quality work, cost effective, responding to emergency situations in an efficient and timely manner to effect immediate repairs. Analyze existing work procedures and develop a plan to improve ways to provide efficient, time saving and cost effective approach processes. Perform a variety of specialized maintenance and repair work assigned such as – major overhauls of Engine, Hydraulic pumps & cylinders, Rotary coupling, swing drive, torque hub and other mechanical components. Repair electrical components such as starter motors, alternators, and various controllers used on the AWP’s. Test and perform pressure setting procedures of function pump, control valves, charge & pressure valves, Engine valve lash adjustment. Use testing and measuring instruments to Test, analyze, calibrate and adjust/ upgrade JLG control system, Genie generic system, Teupen TODAC system, EZcal on MEC, Snorkel & Skyjack machines. Read and interpret basic hydraulic & electrical schematic and troubleshoot faults on various AWP’s. Carry out major refurbishment work of AWP’s which involves replacement of boom/scissor assembly and major components. Periodic safety, operation and maintenance inspection of machines at various sites. Install track and trace equipment on AWP’s and upgrade equipment system performance in accordance with manufacturer's safety notice. Details of more specific additional duties: (Including but not limited to :)

Applying approved methods of work & repair practices. Alternative methods will be considered after consultation. An example of approved procedures for the maintenance and repair of equipment is the “Service Work Order”. All Technicians involved in “On site servicing” & “Breakdowns”, must adopt & use the approved procedure only. Examples of some of these procedures are; the correct use & completion of “Field Service Reports”, correct phone procedure, & the polite communication with clients at all times. Any parts replaced must be recorded on the approved “service work order” or “Field service reports”. All parts that are replaced under warranty must have the appropriate paperwork completed as soon as the part has been used. (Determination of warranty status can be obtained from the Workshop Manager). All tools used must be operated in the manner for which they were designed; looked after and returned to their correct location at the end of the working day. All work practices must be safe. Applicable “Personal Protective Equipment”, such as Safety glasses & hearing protection, must be used at all times where applicable. Physical Demands and Working Environment:

Primary functions require sufficient physical ability and mobility to work in a field environment and make repetitive hand movement, heights on ladders, to lift, carry, push and or pull moderate amounts of weight, to operate/test the assigned equipment, and communicate to exchange information. Vision should see in the normal visual range with or without correction. Vision sufficient to read computer screens and on board digital controller screens and schematic drawings. Hearing in the normal audio range with or without correction. Key Competencies

Flexibility

-

Communication skills Organisational skills

-

Problem Solving Teamwork / Independence Requirements

Degree or diploma in engineering/ 6 - 8 years of increasingly responsible maintenance and repair experience in AWP’s or related equipment. Experience & knowledge of diagnostic equipment, and procedures. Good knowledge of English, both written and spoken. Knowledge of an additional language is an asset. Quick learner, eager to learn and develop. Valid Qatar driving license. IPAF certification. The Company

Manlift is an international company specialising in renting and selling aerial work platforms and related machinery of renowned brands which include JLG, Genie & Teupen among others. Over the years, Manlift has grown into a specialist in the area of working safely and efficiently at heights across the UAE, Qatar and India. By continuously investing in people, quality and innovation, Manlift has become a leading international player. With its international operation and support, Manlift can offer its customers the best possible service wherever they are. Manlift is among the most forward-thinking, innovative and proactively safe Aerial Work Platforms specialists in the world not only renting and selling units from 2m-50m but also holding a large inventory of first-class spare parts to support the ever-growing numbers of after-sales service agreements. Furthermore, Manlift considers working safely and efficiently at heights of paramount importance. As such, Manlift's Purpose-built and certified IPAF training facilities have been training individuals to international standards and codes of practice since 2010. Manlift, although relatively young, has a rich and successful history. Its primary objectives are to be attentive to its customers and to maintain a bond with them. In spite of its international growth and development, Manlift has remained small in character. This is evident in all of our product offerings, fast service, reliability and sincere attention to the customer. We compete with our platforms, we win with our people. The Manlift Way

To ensure that we always deliver the best customer experience, we’ve implemented efficiency measures focusing on continuous improvement at all stages of the rental cycle. And as a result, our customers benefit in terms of: Safety Machine availability On-time machine delivery Fast pick up High machine uptime Invoice accuracy One essential feature of this approach – which we call the “Manlift Way” – is that it enables us to constantly monitor and improve key performance indicators across our entire network of its depots, again with the aim of delivering the best customer experience. Job Type: Full-time

#J-18808-Ljbffr

Now Hiring - HVAC Maintenance Technician

For AWENA

**Requirements**:

- Based in Qatar.
- Experience 5 years at least.
- Nationality I n d i a n - N e p a l i
- Fluent in English is a must
- Working hours 8 Hours/days
- Salary 3,000 QR
- We provide Transportation and Accommodation

Send your CV on

Pay: From QAR3,000.00 per month

Overview

Maintenance Technician role at Carrier . Carrier Global Corporation is a global leader in intelligent climate and energy solutions, committed to creating solutions that matter for people and the planet for generations to come.

Role: Maintenance Technician
Location: Doha, Qatar
Employment type: Full-time

About The Role

This position is for a Field Technician in Aftermarket and Service, reporting to the Service Supervisor. Installs, tests, services, and repairs equipment to conform with company operating specifications and customer requirements. Performs tasks assigned by the direct supervisor, including maintenance contracts, repairs, and some warranty-related jobs. Requires moderate experience and judgment to plan and accomplish assigned tasks as instructed by the Service Supervisor.

Key Responsibilities

• Receives daily job schedules from the concerned Service Supervisor and executes accordingly in a timely manner
• Executes and completes the job as per the budgeted man-hour
• Use SYCLO device and generate/deliver time confirmations, job cards and EH&S site surveys
• Meets assigned SOIP targets (revenue, utilization, GM, call back rate, EH&S, and MFA)
• Executes assigned jobs
• Assists Senior Technicians on jobs as required
• Reports escalated problems and spare parts requirements to Supervisor for necessary arrangements
• Installs spare parts when attended
• Attends EH&S trainings and follows guidelines
• Uses the right tools & PPE in the appropriate way; inspects and informs Supervisors
• Maintains site housekeeping post work completion

Requirements

• Technical Diploma
• Minimum 3 years of relevant experience
• Proficiency (Speak, Read & Write) in English
• Strong communication skills
• Customer-focused orientation
• Analytical thinking skills

Benefits

• Health insurance
• Flexible schedules, parental leave and holiday purchase scheme
• Professional development opportunities
• Employee Assistance Programme

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Job Applicant's Privacy Notice

Click on this link to read the Job Applicant's Privacy Notice

Seniority level

• Associate

Employment type

• Full-time

Job function

• Management and Manufacturing

Industries

• Wholesale Building Materials

#J-18808-Ljbffr

Overview

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

Role

Maintenance Technician

Location

Doha, Qatar

Employment type

Part-time

About The Role

This position is for a Field Technician in Aftermarket and Service, reporting to Service Supervisor. Installs, tests, services, and repairs equipment to conform with company operating specifications and customer requirements. Perform jobs given on daily basis by direct supervisor, carries out work related to maintenance contracts, repairs and some warranty related jobs. Relies on moderate experience and judgment to plan and accomplish assigned tasks as instructed by Service Supervisor.

Key Responsibilities

• Receives daily job schedules from concerned Service Supervisor and executes accordingly in a timely manner
• Executes and completes the job as per the budgeted man-hour
• Use SYCLO device and generate / deliver time confirmations, job cards and EH&S site surveys
• Meets assigned SOIP target (revenue, utilization, GM, call back rate, EH&S, and MFA)
• Executes assigned jobs
• Assists Senior Technicians on jobs as required
• Reports escalated problems and spare parts requirements to Supervisor for necessary arrangements
• Install spare parts when attended
• Attends EH&S trainings and always follow guidelines
• Use right tools & PPEs in appropriate way. Inspect and inform Supervisors.
• Maintain site housekeeping post work completion

Qualifications

• Technical Diploma
• Minimum 3 years of relevant experience
• Proficiency (Speak, Read & Write) in English
• Communication skills (Understanding questions and responding correctly)
• Customer focus oriented
• Analytical thinking skills

Benefits

• Have peace of mind and body with our health insurance
• Make yourself a priority with flexible schedules, parental leave and our holiday purchase scheme
• Drive forward your career through professional development opportunities
• Achieve your personal goals with our Employee Assistance Programme

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Job Applicant's Privacy Notice

Click on this link to read the Job Applicant's Privacy Notice

#J-18808-Ljbffr

Continue with Google Continue with Google

️ Skilled Maintenance Techs Wanted - Join a Team that Values Your Craft and Your Time!

Position: Maintenance Technician

Company: TradeMark Residential & Commercial Services LLC

Compensation: $34-$40+/hour based on project volume (Commission Only)

Industry: General Construction (Residential, Commercial)

Location: Snohomish, WA

Job Overview

TradeMark Residential & Commercial Services LLC is seeking a reliable and skilled Maintenance Technician to support both residential and commercial properties. This full-time position is ideal for professionals who excel in multi-trade maintenance and are passionate about delivering quality service and clear communication. From drywall to plumbing and fencing to roofing, your versatility and integrity will make you a valuable part of our close-knit, service-driven team.

Who We Are

At TradeMark Residential & Commercial Services LLC, we're a small, family-focused general contractor known for our attention to detail and work-life balance. We provide professional maintenance and construction solutions for residential and commercial clients across our region. With a strong team-oriented culture, annual company events, and a commitment to wellness and growth, we ensure every technician has the tools, support, and respect they deserve. Learn more at trademarkrcs.com .

Key Responsibilities

• Perform general maintenance and repairs on residential and commercial properties
• Communicate with clients to explain scope of work and set expectations
• Complete daily logs of hours worked and materials used
• Execute various repair tasks, including:
• Drywall patching and painting
• Electrical fixture replacements
• Plumbing repairs (toilets, faucets, hot water tanks, etc.)
• Roofing touch-ups and fence repairs
• Appliance servicing (disposals, dishwashers, refrigerators, washers)
• Accurately quote future work during service visits
• Maintain a clean, organized, and well-stocked company vehicle
• Represent TradeMark professionally in uniform and with a positive attitude
  
  

Qualifications

• Minimum 2 years of hands-on maintenance or handyman experience
• Strong communication and time management skills
• Skilled in general carpentry, plumbing, minor electrical, and finish work
• Ability to problem-solve and make on-site decisions
• Valid driver's license with clean driving record
• Must pass a background check
• Drug-free workplace compliance required
  
  

Benefits

• Company Vehicle & Fuel
• Uniforms Provided
• Bi-Weekly Pay Cycle
• Paid Time Off (Holidays, Vacation, Sick)
• Medical, Dental, and Vision Insurance
• Career Development Opportunities
• Annual Company Trips & Events
  
  

Schedule

• Monday-Friday, Full-Time
• Travel to job sites is required daily
  
  

Location:

• Field-based role - primary service area includes residential and commercial clients throughout the region. Daily travel required; company vehicle provided.
  
  

Equal Employment Opportunity (EEO)

We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status.

Compliance Statement

A background check will be completed as part of the onboarding process, in compliance with applicable laws. TradeMark Residential & Commercial Services LLC is a drug-free workplace.

#FC25

Room Maintenance Technician - Delta City Center Doha #J-18808-Ljbffr

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

About the role

This position is for a Field Technician in Aftermarket and Service, reporting to Service Supervisor. Installs, tests, services, and repairs equipment to conform with company operating specifications and customer requirements. Perform jobs given on daily basis by direct supervisor, carries out work related to maintenance contracts, repairs and some warranty related jobs. Relies on moderate experience and judgment to plan and accomplish assigned tasks as instructed by Service Supervisor.

Key Responsibilities :

As a Maintenance technician, you’ll be responsible for :

• Receives daily job schedules from concerned Service Supervisor and executes accordingly in a timely manner
• Executes and completes the job as per the budgeted man-hour
• Use SYCLO device and generate / deliver time confirmations, job cards and EH&S site surveys
• Meets assigned SOIP target (revenue, utilization, GM, call back rate, EH&S, and MFA)
• Executes assigned jobs
• Assists Senior Technicians on jobs as required
• Reports escalated problems and spare parts requirements to Supervisor for necessary arrangements
• Install spare parts when attended
• Attends EH&S trainings and always follow guidelines
• Use right tools & PPEs in appropriate way. Inspect and inform Supervisors.

Requirements

We are looking for people who are as a minimum you must have :

• Technical Diploma
• Minimum 3 years of relevant experience
• Communication skills (Understanding questions and responding correctly)
• Customer focus orientated
• Analytical thinking skills

We are committed to offering competitive benefits programs for all of our employees, and enhancing our programs when necessary.

• Have peace of mind and body with our health insurance
• Make yourself a priority with flexible schedules, parental leave and our holiday purchase scheme
• Drive forward your career through professional development opportunities
• Achieve your personal goals with our Employee Assistance Programme

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way .

Join us and make a difference.

Apply Now!

Carrier is An Equal Opportunity / Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Job Applicant's Privacy Notice :

Click on this link to read the Job Applicant's Privacy Notice

#J-18808-Ljbffr

Overview

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do. Role

Maintenance Technician Location

Doha, Qatar Employment type

Part-time About The Role

This position is for a Field Technician in Aftermarket and Service, reporting to Service Supervisor. Installs, tests, services, and repairs equipment to conform with company operating specifications and customer requirements. Perform jobs given on daily basis by direct supervisor, carries out work related to maintenance contracts, repairs and some warranty related jobs. Relies on moderate experience and judgment to plan and accomplish assigned tasks as instructed by Service Supervisor. Key Responsibilities

Receives daily job schedules from concerned Service Supervisor and executes accordingly in a timely manner Executes and completes the job as per the budgeted man-hour Use SYCLO device and generate / deliver time confirmations, job cards and EH&S site surveys Meets assigned SOIP target (revenue, utilization, GM, call back rate, EH&S, and MFA) Executes assigned jobs Assists Senior Technicians on jobs as required Reports escalated problems and spare parts requirements to Supervisor for necessary arrangements Install spare parts when attended Attends EH&S trainings and always follow guidelines Use right tools & PPEs in appropriate way. Inspect and inform Supervisors. Maintain site housekeeping post work completion Qualifications

Technical Diploma Minimum 3 years of relevant experience Proficiency (Speak, Read & Write) in English Communication skills (Understanding questions and responding correctly) Customer focus oriented Analytical thinking skills Benefits

Have peace of mind and body with our health insurance Make yourself a priority with flexible schedules, parental leave and our holiday purchase scheme Drive forward your career through professional development opportunities Achieve your personal goals with our Employee Assistance Programme Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way. Join us and make a difference. Apply Now! Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice Click on this link to read the Job Applicant's Privacy Notice

#J-18808-Ljbffr

Overview Maintenance Technician

role at

Carrier . Carrier Global Corporation is a global leader in intelligent climate and energy solutions, committed to creating solutions that matter for people and the planet for generations to come.

Role:

Maintenance Technician Location: Doha, Qatar Employment type: Full-time

About The Role This position is for a Field Technician in Aftermarket and Service, reporting to the Service Supervisor. Installs, tests, services, and repairs equipment to conform with company operating specifications and customer requirements. Performs tasks assigned by the direct supervisor, including maintenance contracts, repairs, and some warranty-related jobs. Requires moderate experience and judgment to plan and accomplish assigned tasks as instructed by the Service Supervisor.

Key Responsibilities

Receives daily job schedules from the concerned Service Supervisor and executes accordingly in a timely manner

Executes and completes the job as per the budgeted man-hour

Use SYCLO device and generate/deliver time confirmations, job cards and EH&S site surveys

Meets assigned SOIP targets (revenue, utilization, GM, call back rate, EH&S, and MFA)

Executes assigned jobs

Assists Senior Technicians on jobs as required

Reports escalated problems and spare parts requirements to Supervisor for necessary arrangements

Installs spare parts when attended

Attends EH&S trainings and follows guidelines

Uses the right tools & PPE in the appropriate way; inspects and informs Supervisors

Maintains site housekeeping post work completion

Requirements

Technical Diploma

Minimum 3 years of relevant experience

Proficiency (Speak, Read & Write) in English

Strong communication skills

Customer-focused orientation

Analytical thinking skills

Benefits

Health insurance

Flexible schedules, parental leave and holiday purchase scheme

Professional development opportunities

Employee Assistance Programme

Our commitment to you Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Job Applicant's Privacy Notice

Click on this link to read the Job Applicant's Privacy Notice

Seniority level

Associate

Employment type

Full-time

Job function

Management and Manufacturing

Industries

Wholesale Building Materials

#J-18808-Ljbffr