224 Electrical Mechanical Technician Arabic Speaker jobs in Qatar

Overview

SOS International LLC (SOSi) is seeking a Facilities Maintenance Technician. The tasks performed shall include but not be limited to minor plumbing, carpentry, sheet metal, welding, locksmithing, and minor movement and reconfiguration of furniture in support of a Government customer at Al Udeid Air Base, Qatar.

Essential Job Duties

Perform repairs, renovations, and preventive maintenance on customer facilities. Remodel, retrofit, and repair interior and exterior structures made of wood, light gauge metal, drywall, or plaster, and the associated plumbing systems. Perform troubleshooting and user-level preventive maintenance checks on plumbing systems and ensure higher-level preventive maintenance inspections are being conducted. Provide minor repairs to plumbing systems (water, sewage, and wastewater), old piping, clogged fixtures, leaky faucets, and equipment; check old pipes for fit, soundness, and operation; and maintain available back-up assets on hand to ensure operational levels. Conduct coordination with other facility maintenance tradesmen and civil engineering authorities. Work from blueprints, specifications, drawings, and instructions to remodel, retrofit, maintain, and repair various types of facilities and structures. Inspect completed work for conformance with specifications, requirements and compliance with applicable building and safety codes and regulations; inspect related work by contractors. Plan, install, repair, alter, and/or replace furnishings, fixtures, equipment, appliances, and finishes to include doors, flooring, ceilings, and cabinets as necessary. This includes inspection, maintenance, repair or improvement of roofing components, windows, exterior drainage.

Minimum Requirements

Active in Scope TS/SCI security clearance. Five years of relevant facility maintenance experience. Experience with maintenance of residential and commercial structural, plumbing, locksmith, fencing, gating, furnishings or other common fixtures and systems. Must be able to safely use manual tools and power equipment common in the construction and facilities trades.

Preferred Qualifications

Understanding of the Air Force or Army culture, language and expectations for mission success. Knowledge of welding and sheet metal fabrication for minor maintenance and repair of flashing, ducting, fencing, turnstiles, signage, and other structural components.

Work Environment

Full-time position with standard working hours; may require occasional evening or weekend work. Work is performed both indoors and outdoors, in various weather conditions. Exposure to potentially hazardous materials and environments; appropriate safety measures must be followed.

Working at SOSi

All interested individuals will receive consideration and will not be discriminated against for any reason. Active in Scope TS/SCI security clearance. Five years of relevant facility maintenance experience. Experience with maintenance of residential and commercial structural, plumbing, locksmith, fencing, gating, furnishings or other common fixtures and systems. Must be able to safely use manual tools and power equipment common in the construction and facilities trades. Perform repairs, renovations, and preventive maintenance on customer facilities. Remodel, retrofit, and repair interior and exterior structures made of wood, light gauge metal, drywall, or plaster, and the associated plumbing systems. Perform troubleshooting and user-level preventive maintenance checks on plumbing systems and ensure higher-level preventive maintenance inspections are being conducted. Provide minor repairs to plumbing systems (water, sewage, and wastewater), old piping, clogged fixtures, leaky faucets, and equipment; check old pipes for fit, soundness, and operation; and maintain available back-up assets on hand to ensure operational levels. Conduct coordination with other facility maintenance tradesmen and civil engineering authorities. Work from blueprints, specifications, drawings, and instructions to remodel, retrofit, maintain, and repair various types of facilities and structures. Inspect completed work for conformance with specifications, requirements and compliance with applicable building and safety codes and regulations; inspect related work by contractors. Plan, install, repair, alter, and/or replace furnishings, fixtures, equipment, appliances, and finishes to include doors, flooring, ceilings, and cabinets as necessary. This includes inspection, maintenance, repair or improvement of roofing components, windows, exterior drainage.

#J-18808-Ljbffr

**The Role**:
Accountability
- Prepare and complete relevant QA/QC documentation for all activities and support RCA (Root Cause Analysis) investigations.
- Follow Gas Game/AMS ME (Maintenance Execution) process and use SAP tools to manage notifications, work orders, material management, and job history recording.
- Create and maintain a harmonious industrial relations climate in order to minimize conflict.
- Lead/ Liaise with contractor partners for maintenance activities and services provided by contractors related to maintenance.
- Able to work effectively with minimum supervision and able to take important technical & business decisions.
- Strong team player with highly effective communications towards stakeholders / interpersonal & coaching skills.
- Have ability to read and interpret equipment manuals and work orders to perform required maintenance and services.
- To be able to coach and train National Mechanical Technicians, Trainees and Contractor Partner personnel.
- Establish materials and equipment required to correctly complete all allocated tasks.
- Participate in on call Duty Roster, working additional time &/or weekends upon request.

Dimensions
- The Instrument Maintenance Technician is part of the Asset Maintenance Team - Liquid Processing Area responsible for carrying out preventive and corrective maintenance activities for pearl GTL complex.
- Contribute to maintaining equipment reliability and availability to maintain plant production. Support Project QA/QC commissioning. Demonstrate additional skill and responsibility to support Supervisor and lead others.

**What we need from You**
- Experience in calibration, repair troubleshooting and analysis of equipment failure is required
- Knowledge and experience in Instrument Distributed Control Systems, Programmable Logic Controllers, Field Instrument Installation, Maintenance Execution and Instrumented Protective devices Inspection and Testing is required.
- Establish materials and equipment required to correctly complete all allocated tasks.
- First intervention in troubleshooting and analysis
- Access tasks and ensure accurate history of maintenance & inspection activities within the Computerized Maintenance Management System.
- The incumbent shall have the ability to work in a team in a multicultural environment and must be able to communicate effectively. Fluency in both written and verbal English is mandatory. given
- Lead by example, coordinate complex operations with other stakeholder with respect of professionalism
- Lead and direct the group of Shell team and Contractor partners for the assigned jobs/ tasks.
- Coaching and develop National Technicians embedded within Maintenance team and ability to mentor junior colleagues.
- The incumbent shall have knowledge in scientific principles, different measuring principles, engineering fundamentals and computer technology and have the ability to mentor junior colleagues
- Computer skill - Microsoft Office and working experience on SAP system is essential
**Translated Company Description
**Disclaimer

Job Details

Print Job Details Download as PDF

Key Relationships

Internal: Senior Service Technician, Service Admin, Service Manager, Operations Manager and Managing Director (if necessary)

External: Clients / customers, Site Project Managers (if necessary)

Accountabilities

• Assist senior service technician in equipment installation, maintenance and repairs
• Conduct routine inspections and preventive maintenance tasks
• Troubleshooting and diagnosing equipment malfunctions
  
  

Duties and Responsibilities

• Comply with Primepower servicing schedules and procedures
• Ensure all equipment is prepared for hire in compliance with Primepower 'Green Card' procedure
• Ensure all work performed reports are approved by client (on site) and are legibly produced
• Ensure immediate response and minimal disruption to client's requirements
• Ensure good housekeeping of work area and service vehicle
• Maintain a minimum spares level in service vehicle as per procedures
• Effective troubleshooting to minimise downtime and unnecessary repair costs
• Customer satisfaction externally & internally
• Compliance to QHSE & ISO Standards and Procedures
• Compliance with 24 hour call - out policy
• Any other duties considered essential for effective operations and service.
• Primepower places a strong emphasis on health, operational safety and environmental protection. It is a requirement and moral obligation of each employee to be actively committed and accountable for compliance to the Primepower Health, Safety & Environmental policies, operating procedures and compliance to local legislation
• Any other tasks, duties & responsibilities that may be added from time to time as relevant to business requirements
  
  

Skills

Desired Skills:

• Able to work the hours required to enhance the service division operations
• Ideally have a recognized qualification in Electrical and/or Mechanical Engineering
• Be computer Literate
• Good command of English language, spoken and written
• Good Communication skills
• Ability to work in a team environment
• Able to work on own initiative and under pressure.
• Able to work to strict timeframes and achieve results.
• Must be able to work to written procedures and comply with company policies
  
  

Desired Behaviors

• Drive for results - a deep seated inner desire to compete against standards of excellence and achieve "step changes" in business results
• Task Completion - reliable, committed to completing tasks
• Resilience - persistent, positive and self-reliant
• Accountability - drives outcomes by taking personal responsibility
• Customer Focus - understands the importance of customer needs, whether internal or external, focuses on responding to them and develops relationships
• Working together with others - relates to people, engages and builds relationships
  
  

Specialized Training/ Knowledge Required

• Able to work long hours in demanding conditions under pressure
• Good command of English language, spoken and written
• Good Communication skills must be able to complete reports legibly
• Effective troubleshooting capability
• Ability to read electrical drawings
• Possession of driving license essential
• Capable of basic administration and working to written procedure
  
  

Qualifications

• College Degree in a Mechanical or Electrical field or Industrial Training Institute qualifications
• Grade 10 or 12 clarification
• Previous Experience with Cummins/Iveco/Scania Diesel Generator engines
• Must hold an official Mechanical and Electrical trade qualification from a recognized organization
• Proficiency with generator controllers including PCC 2100, PCC 3100, PCC 3200, PCC 3300 and DSE 8000 series, with training certificates from courses attended in programming
• Demonstrated track record in rebuilding Cummins engines, including KTA50, KTA38, KSQ23, QSX15, QSG12, NTA855, QSL9, 6BTA, and 4BT
• Accredited high voltage qualification from a recognized organization
• Completion of high voltage switching courses
• Familiarity with the generator load testing process
  
  

Experience

• Minimum 3 years of experience relevant role or related field
• Dealer experience (Cummins and Caterpillar)
• Previous experience in the rental industry
• Prior experience working with diesel generator power plants
  
  

Apply Now

Job Details

Print Job Details Download as PDF

Key Relationships

Internal: Senior Service Technician, Service Admin, Service Manager, Operations Manager and Managing Director (if necessary)

External: Clients / customers, Site Project Managers (if necessary)

Accountabilities

• Assist senior service technician in equipment installation, maintenance and repairs
• Conduct routine inspections and preventive maintenance tasks
• Troubleshooting and diagnosing equipment malfunctions
  
  

Duties and Responsibilities

• Comply with Primepower servicing schedules and procedures
• Ensure all equipment is prepared for hire in compliance with Primepower ‘Green Card’ procedure
• Ensure all work performed reports are approved by client (on site) and are legibly produced
• Ensure immediate response and minimal disruption to client’s requirements
• Ensure good housekeeping of work area and service vehicle
• Maintain a minimum spares level in service vehicle as per procedures
• Effective troubleshooting to minimise downtime and unnecessary repair costs
• Customer satisfaction externally & internally
• Compliance to QHSE & ISO Standards and Procedures
• Compliance with 24 hour call – out policy
• Any other duties considered essential for effective operations and service.
• Primepower places a strong emphasis on health, operational safety and environmental protection. It is a requirement and moral obligation of each employee to be actively committed and accountable for compliance to the Primepower Health, Safety & Environmental policies, operating procedures and compliance to local legislation
• Any other tasks, duties & responsibilities that may be added from time to time as relevant to business requirements
  
  

Skills

Desired Skills:

• Able to work the hours required to enhance the service division operations
• Ideally have a recognized qualification in Electrical and/or Mechanical Engineering
• Be computer Literate
• Good command of English language, spoken and written
• Good Communication skills
• Ability to work in a team environment
• Able to work on own initiative and under pressure.
• Able to work to strict timeframes and achieve results.
• Must be able to work to written procedures and comply with company policies
  
  

Desired Behaviors

• Drive for results – a deep seated inner desire to compete against standards of excellence and achieve “step changes” in business results
• Task Completion – reliable, committed to completing tasks
• Resilience – persistent, positive and self-reliant
• Accountability – drives outcomes by taking personal responsibility
• Customer Focus – understands the importance of customer needs, whether internal or external, focuses on responding to them and develops relationships
• Working together with others – relates to people, engages and builds relationships
  
  

Specialized Training/ Knowledge Required

• Able to work long hours in demanding conditions under pressure
• Good command of English language, spoken and written
• Good Communication skills must be able to complete reports legibly
• Effective troubleshooting capability
• Ability to read electrical drawings
• Possession of driving license essential
• Capable of basic administration and working to written procedure
  
  

Qualifications

• College Degree in a Mechanical or Electrical field or Industrial Training Institute qualifications
• Grade 10 or 12 clarification
• Previous Experience with Cummins/Iveco/Scania Diesel Generator engines
• Must hold an official Mechanical and Electrical trade qualification from a recognized organization
• Proficiency with generator controllers including PCC 2100, PCC 3100, PCC 3200, PCC 3300 and DSE 8000 series, with training certificates from courses attended in programming
• Demonstrated track record in rebuilding Cummins engines, including KTA50, KTA38, KSQ23, QSX15, QSG12, NTA855, QSL9, 6BTA, and 4BT
• Accredited high voltage qualification from a recognized organization
• Completion of high voltage switching courses
• Familiarity with the generator load testing process
  
  

Experience

• Minimum 3 years of experience relevant role or related field
• Dealer experience (Cummins and Caterpillar)
• Previous experience in the rental industry
• Prior experience working with diesel generator power plants
  
  

Apply Now #J-18808-Ljbffr