73 Qc Inspector Painting jobs in Qatar

Job Purpose

The QA/QC Inspector (E/I) is responsible for executing electrical and instrumentation inspection activities in support of QA/QC program requirements across CAT IV–VI projects. The role ensures all E/I inspections comply with Client LNG standards, project specifications, and international codes.

As the field-level focal point, the inspector works under the direction of the QA/QC Engineer and is responsible for overseeing inspection readiness, verifying contractor performance, and maintaining inspection records to ensure consistent delivery of quality.

• Job Context & Challenges Performing inspections in live LNG operational environments requires strict compliance with permit-to-work systems, coordination with operations and HSE, and detailed planning to minimize operational impact.
• Managing inspections across multiple brownfield projects with varying access limitations, aged infrastructure, and evolving project scopes while ensuring full compliance with standards and procedures.
• Acting as a technical interface between QA/QC, Operations, and Contractors to proactively identify and mitigate quality risks.
• Ensuring timely closure of E&I-related non-conformities and identifying recurring issues in legacy systems to implement sustainable corrective and preventive actions.

1. Key Responsibilities Ensure full implementation of the CLIENT Quality Management System and project-specific quality plans.
2. Interpret discipline-specific technical specifications and ensure compliance in all inspection activities.
3. Review contractor quality deliverables and provide clear feedback aligned with CLIENT requirements.
4. Maintain professional relationships with contractors and third-party agencies.
5. Verify that contractor QA/QC processes and procedures are effectively executed.
6. Perform material/equipment receipt inspections with visual and dimensional verification.
7. Conduct site inspections on E/I installation, testing, and calibration activities to ensure conformance to technical documents.
8. Ensure current project documents are available and quality records are maintained per document control procedures.
9. Submit detailed daily inspection reports highlighting quality concerns and coordinate with QA focal points for issue resolution.
10. Lead and document Quality Walkabouts, surveillance, and audits using approved templates.
11. Record and monitor non-conformances, supporting timely follow-up and closure.
12. Serve as a key QA/QC representative ensuring project quality expectations are met.
13. Conduct inspections related to Industrial Control Systems and associated software.
14. Inspect electrical systems including LV/MV motors, switchgear, transformers, relays, lighting, UPS, and control panels.
15. Inspect instrumentation systems including DCS, ESD, PLCs, transmitters (pressure, DP, level, flow, RTDs, thermowells), gauges, analyzers, and tubing.
16. Inspect and verify fire & gas, PAGA, and telecom systems compliance.
17. Ensure quality assurance over cybersecurity and network equipment (servers, switches, workstations, etc.).
18. Monitor ongoing site activities for conformance to CLIENT technical standards.
19. Ensure full compliance with CLIENT’s HSE requirements during all project phases.
20. Maintain a register of quality observations and proposed resolutions aligned with CLIENT policies.

Skills

• Generic AccountabilitiesHSE Compliance: Conduct all duties in alignment with CLIENT’s Health, Safety, Environment, and Quality standards.
• Qatarization: Support the professional development of Qatari staff (mandatory for expatriates).
• Regulatory Compliance: Adhere to anti-trust, competition law, and company firewall policies.

• Qualifications & Certifications Diploma in Electrical Engineering or equivalent, with relevant Trade Certifications in Electrical and/or Instrumentation.
• Strong familiarity with E&I codes and standards, including IEC, NEC, NFPA, BS, NEMA, NETA, and ATEX/IECEx 60079.
• Understanding of quality assurance methodologies, inspection practices, and documentation standards.

• Experience Minimum 8 years’ QA/QC inspection experience in the oil & gas industry across both greenfield and brownfield environments.
• Substantial hands-on experience managing inspections during live shutdowns within LNG facilities.
• Demonstrated proficiency in QA/QC inspections throughout procurement, fabrication, installation, and construction phases.
• Thorough working knowledge of E&I-specific international standards and project execution under strict operational constraints.

• Technical & Business Skills Strong verbal and written communication skills in English.
• Proficiency in computer-based QA/QC and inspection systems.
• Effective interpersonal and stakeholder management skills.
• Capable of preparing technical reports and interpreting data.
• Able to provide technical guidance and act as delegate to QA/QC Engineer as needed.

#J-18808-Ljbffr

Overview

QA/QC INSPECTOR (ELECTRICAL & INSTRUMENT) (Pos. 11.6.82) Qualifications

Electrical/Electronic/Instrumentation degree and/or diploma with experience in quality control in multi-discipline construction and commissioning environment. Preferably having formal training in QC and membership with recognized charted or other professional institution. Experience: 10 years' experience in similar position, experience in GCC is desirable. The candidate should have sound working knowledge on QC aspects and various testing requirements related to installation, testing and commissioning of Electrical and Instrumentation Equipment in Oil/Gas and Petrochemical Plants. Responsibilities

Implementing the elements of QP's management system applicable to your function. Your own safety and the safety of others who may be affected by QP's business, whether or not the activity is under your direct control, and proactively participate in all safety matters affecting the construction of the project. Preventing pollution to the environment, either by you or by others in project. Coordinating the inspection and test requirements on behalf of QP. Undertake familiarization with project and discipline specific inspection documentation to ensure understanding of contract requirements. Familiar with international Codes, Standards and Regulatories (e.g. QCS, NEC, IEC, IEEE, NFPA 70, etc.). Implement quality inspection procedures on construction activities, suppliers, sub-contractors to ensure compliance to project specification. Ensure that the documentation generated by the inspections, tests, surveillance and surveys meets the requirements of the Project Quality Plan, ITPs and project requirement. Complete relevant forms and prepare reports on inspections and tests undertaken for inclusion in, and maintenance of, inspection records. Communicating effectively with the contractor, third parties and end users at your level. Ensuring that all equipment used for measuring and testing is in calibration and such records are available. Assisting construction personnel to develop the required quality documentation, including method statements, work procedures, inspection and test plans and inspection and test records. Assisting construction personnel to identify problems and potential or actual non-conformances and to assist in proposing corrective and preventive actions. Perform & Monitor technical inspections during Site/Factory Acceptance Tests for main electrical components such as Power, Distribution and Measurement Transformers, MV and LV Switchgears, Power and Telecommunication / Instrumentation Cables, MCCBs, PLC, MCC, LCC panels. Liaise with other Field Supervisors and Contractor to be aware of planned and completed construction works to ensure SATs and E&I Tests are planned and performed. Implementation of QC activities for Electrical and Instrumentation works in site. Review Inspection & Test Plans, Checklist and RFI. Material Receiving Inspection and check the installation of Electrical equipment and Instruments are as per correct hook-up drawings and verifying red-line mark-up as necessary. Experience in HV/LV cable laying standards, producing of punch list and commissioning of electrical equipment and witness the Loop Checking. Assist Quality Engineer to Review routine test report, quality documentation and inspecting for conformity of electrical/instrument equipment which are delivered to the site. Monitor Contractor's Performing/Inspecting E&I site activities such as Substation Grounding System installation and grounding measurements (fall-of-potential diagram, soil resistivity, step voltage tests and measurements) including Material-Receiving according to Quality Procedures implementation. Ensure all E&I activities are performed according to Project requirements and that tests and reports are prepared, approved and included in documentation packages. Witness Site & Laboratory Tests related to Electrical and Instrumentation activities. Monitor that materials and equipment are used in accordance to specifications. Carry-out random check on receiving-inspection of E&I equipment. Check delivery documents against purchase orders, specification and material certificates. Reject any material not meeting specification or not bearing authentic material certificate. Follow-up on Corrective Actions to close-out non-conformances. Monitor trends of non-compliance to QP requirements and feedback the status of Contractor's performance. Initiate Surveillance / NCR's for QC Engineer's approval.

#J-18808-Ljbffr

mselect

is looking to hire a

QA/QC Inspector (WELD/NDT)

for a oil and gas operator in

Doha, Qatar . Candidates must have a minimum of 10 years of relevant experience in the Oil & Gas Downstream Industry, preferably with an international consultancy company, third-party inspection/certification Company, EPIC contractor, or end-user, in the implementation of major projects. Fluency in English is a must. Key Responsibilities Ensure that the quality requirements of the fabrication, construction and installation activities, as detailed in the main contractor-approved QC procedure and plans, are implemented in accordance with approved project documents Ensure that contractors, subcontractors and Vendors have the required competent resources, implant internationally acceptable practices and deliver a product in compliance with Corporate and Project Quality requirements Monitor all site and fabrication yard welding activities and ensure that all welding joints were welded as per approved WPS’s Attend all PQR’s mechanical testing to ensure complete implementation of corporate standard requirements Witness all contactors’ welder's qualification tests and evaluate their visual and NDT results Witness all site or fabrication yard NDT daily activities, carry out interpretation for test results, and evaluate the findings outs Monitor the stage (in-process) inspection of offshore steel structure fabrications, and top-side facilities at contractor fabrication premises and verify the product conformity to corporate standards, project specs, and international codes/standard Report daily to the QA/QC Engineer and advise him on the main contractor's compliance with contract procedures and standards and any matters affecting quality Requirements Minimum high technical school or equivalent welding/NDT certification from a recognized organization such as AWS, TWI, API, ASME, ASNT…etc, TWI CSWIP 32 or AWS SCWI in welding is a must and ASNT LEVEL II in NDT A minimum of 10 years of relevant experience in the Oil & Gas Downstream Industry with an international consultancy company, third-party inspection/certification Company, EPIC contractor or end user in major project implementation is essential *Only applicants meeting the strict criteria outlined above will be contacted as part of the shortlisting process. Bounty Hunter World

#J-18808-Ljbffr

Qualifications

Civil / Structural bachelors degree and / or diploma with experience in quality Control in multi-discipline construction environment. Preferably having formal training in QC / QMS and membership with recognized charted or other professional institution. Experience

10 years experience in similar position, experience in GCC is desirable. As minimum, he shall have five (5) years experience directly relating to inspection / execution of construction activities, preferably worked as client QA / QC inspector. The candidate should have sound working knowledge on QC aspects and various testing requirements related to major oil & gas / petrochemical focused civil / structural construction & infrastructure projects. Primary Duties and Responsibilities

Implementing the elements of client management system applicable to your function. Taking care of your own safety and the safety of others who may be affected by client business, whether or not the activity is under your direct control, and proactively participate in all safety matters affecting the construction of the project. JOB DESCRIPTIONS Preventing pollution to the environment, either by you or by others in project. Co-ordinating the inspection and test requirements on behalf of client. Undertake familiarization with Project and discipline specific inspection documentation to ensure understanding of contract requirements. Implement quality inspection procedures on construction activities, suppliers, subcontractors to ensure compliance to project specification. Ensure that the documentation generated by the inspections, tests, surveillance, and surveys meet the requirements of the Project Quality Plan (PQP), ITPs, and project requirement. Review of contractor / subcontractor / supplier / TPIA quality documentation and reports. Complete relevant forms and prepare reports on inspections and tests undertaken for inclusion in, and maintenance of, inspection records. Communicating effectively with the contractor, third parties and end users at your level. Ensuring that all equipment used for measuring and testing is in calibration and such records are available. Assisting construction personnel to develop the required quality documentation, including method statements, work procedures, inspection and test plans and inspection and test records. Assisting construction personnel to identify problems and potential or actual nonconformances and to assist in proposing correction and corrective actions. Liaise with other Field Supervisors and contractor to be aware of planned and completed construction works to ensure civil / structural tests are planned and performed. Assist the Sr.QA / QC engineer to review and comment quality documents such as material submittal, Quality plan, project specification and test results, pertaining to concrete casting, steel fixing, anchor bolts, grouting, steel structure erection, block works, soil & excavation, and material-receiving activities. Monitor contractors concrete casting, steel fixing, anchor bolts, grouting, steel structure erection, soil excavation & backfill, block works, plastering, and material receiving including quality procedures implementation and QA / QC activities. Ensure all civil, structural, and architectural activities are performed according to project requirements and that tests and reports are prepared, approved and included in documentation packages. Witness site & laboratory tests related to civil, structural & architectural activities. Monitor all materials and equipment are used in accordance with specifications. Carry-out random check on receiving-inspection of products from certified concrete & asphalt batch plants, mixers, lifting gears, etc. Check delivery documents against purchase orders, specification, and material certificates. Reject any material not meeting specification or not bearing authentic material certificate. Carry out random visual & dimensional checks on materials. Follow-up on corrections, preventive & corrective actions to close-out nonconformances. Monitor trends of non-compliance to client requirements and feedback the status of contractors performance. Initiate Surveillance / NCRs / CARs for Sr.QA / QC Engineers approval. Assist the Sr.QA / QC Engineer to conduct Quality Audits for contractors, sub-contractors, suppliers, and Third-party Laboratories.

#J-18808-Ljbffr

Job Purpose The QA/QC Inspector (E/I) is responsible for executing electrical and instrumentation inspection activities in support of QA/QC program requirements across CAT IV–VI projects. The role ensures all E/I inspections comply with Client LNG standards, project specifications, and international codes. As the field-level focal point, the inspector works under the direction of the QA/QC Engineer and is responsible for overseeing inspection readiness, verifying contractor performance, and maintaining inspection records to ensure consistent delivery of quality. Job Context & Challenges Performing inspections in live LNG operational environments requires strict compliance with permit-to-work systems, coordination with operations and HSE, and detailed planning to minimize operational impact. Managing inspections across multiple brownfield projects with varying access limitations, aged infrastructure, and evolving project scopes while ensuring full compliance with standards and procedures. Acting as a technical interface between QA/QC, Operations, and Contractors to proactively identify and mitigate quality risks. Ensuring timely closure of E&I-related non-conformities and identifying recurring issues in legacy systems to implement sustainable corrective and preventive actions. Key Responsibilities Ensure full implementation of the CLIENT Quality Management System and project-specific quality plans. Interpret discipline-specific technical specifications and ensure compliance in all inspection activities. Review contractor quality deliverables and provide clear feedback aligned with CLIENT requirements. Maintain professional relationships with contractors and third-party agencies. Verify that contractor QA/QC processes and procedures are effectively executed. Perform material/equipment receipt inspections with visual and dimensional verification. Conduct site inspections on E/I installation, testing, and calibration activities to ensure conformance to technical documents. Ensure current project documents are available and quality records are maintained per document control procedures. Submit detailed daily inspection reports highlighting quality concerns and coordinate with QA focal points for issue resolution. Lead and document Quality Walkabouts, surveillance, and audits using approved templates. Record and monitor non-conformances, supporting timely follow-up and closure. Serve as a key QA/QC representative ensuring project quality expectations are met. Conduct inspections related to Industrial Control Systems and associated software. Inspect electrical systems including LV/MV motors, switchgear, transformers, relays, lighting, UPS, and control panels. Inspect instrumentation systems including DCS, ESD, PLCs, transmitters (pressure, DP, level, flow, RTDs, thermowells), gauges, analyzers, and tubing. Inspect and verify fire & gas, PAGA, and telecom systems compliance. Ensure quality assurance over cybersecurity and network equipment (servers, switches, workstations, etc.). Monitor ongoing site activities for conformance to CLIENT technical standards. Ensure full compliance with CLIENT’s HSE requirements during all project phases. Maintain a register of quality observations and proposed resolutions aligned with CLIENT policies. Skills Generic AccountabilitiesHSE Compliance: Conduct all duties in alignment with CLIENT’s Health, Safety, Environment, and Quality standards. Qatarization: Support the professional development of Qatari staff (mandatory for expatriates). Regulatory Compliance: Adhere to anti-trust, competition law, and company firewall policies. Qualifications & Certifications Diploma in Electrical Engineering or equivalent, with relevant Trade Certifications in Electrical and/or Instrumentation. Strong familiarity with E&I codes and standards, including IEC, NEC, NFPA, BS, NEMA, NETA, and ATEX/IECEx 60079. Understanding of quality assurance methodologies, inspection practices, and documentation standards. Experience Minimum 8 years’ QA/QC inspection experience in the oil & gas industry across both greenfield and brownfield environments. Substantial hands-on experience managing inspections during live shutdowns within LNG facilities. Demonstrated proficiency in QA/QC inspections throughout procurement, fabrication, installation, and construction phases. Thorough working knowledge of E&I-specific international standards and project execution under strict operational constraints. Technical & Business Skills Strong verbal and written communication skills in English. Proficiency in computer-based QA/QC and inspection systems. Effective interpersonal and stakeholder management skills. Capable of preparing technical reports and interpreting data. Able to provide technical guidance and act as delegate to QA/QC Engineer as needed.

#J-18808-Ljbffr

We are hiring for **Civil QA/ QC Inspector**

**Responsibilities**:

- Knowledge and working experience in last stage project.
- **Mandatory experience in Road/Infra project in Qatar with Main contractors.**:

- Experience in Documentation.
- **Duration**:2 months extendable
- **Work location**: Doha
- Valid QID is a must
- Immediate Joining

**Job Types**: Temporary, Contract
Contract length: 2 months

Application Question(s):

- Are you currently residing in Qatar?
- Notice period

**Experience**:

- QA/ QC Inspector (Road/ Infra): 3 years (required)

License/Certification:

- QID (required)

Subject Matter Expert (SME) - Quality Assurance and Control

We are seeking a highly skilled Subject Matter Expert (SME) in Quality Assurance and Control to lead quality initiatives across defense manufacturing, engineering, and systems integration projects. The ideal candidate will bting deep experience in defense-grade quality systems, regulatory compliance, product validation, and continuous improvement to ensure mission-critical systems meet or exceed performance and safety standards. This role ensures the integrity and reliability of defense products throughout their lifecycle.

Responsibilities

• Provide subject matter expertise on quality assurance and control systems, processes, and requirements in accordance with defense and aerospace industry standards.
• Lead the development, implementation, and continuous improvement of quality management systems (QMS), including compliance with ISO 9001, AS9100, and MIL STD requirements.
• Oversee inspection and testing protocols for components, assemblies, and final products; ensure traceability and documentation accuracy.
• Analyze quality performance metrics, conduct root cause analysis, and implement corrective/preventive actions (CAPA) to resolve non-conformities.
• Collaborate with cross-functional teams-engineering, production, supply chain, and program management-to ensure alignment with quality objectives.
• Review and approve manufacturing process plans, test procedures, and product certifications.
• Conduct supplier quality audits and evaluations; support supplier development and qualification activities.
• Ensure compliance with regulatory and contractual requirements (e.g., ITAR, OFARS, NATO AQAP standards).
• Develop training programs and mentoring plans to build internal quality capabilities.
• Serve as a primary liaison during customer audits, government inspections, and third party quality assessments.

Qualifications

• Required:
• Bachelor's degree in Quality Engineering, Industrial Engineering, Mechanical Engineering, or a related field.
• 10+ years of quality assurance/control experience in the defense, aerospace, or high reliability manufacturing sectors.
• Strong working knowledge of quality systems, auditing practices, and process validation.
• Familiarity with defense industry standards such as MIL-STD-1916, AS9102 (FAI), ISO 9001, AS9100, and NADCAP.
• Experience with quality tools and methods including Six Sigma, FMEA, SPC, MSA, and
• 80 problem-solving.
• Excellent attention to detail, documentation, and communication skills.
• Ability to obtain and maintain a security clearance.

Preferred

• Master's degree or advanced certification in Quality or Engineering Management.
• Professional certifications such as ASQ Certified Quality Engineer (CQE), Certified Quality Auditor (CQA), or Lean Six Sigma Black Belt.
• Experience supporting Department of Defense (DoD), NATO, or defense contractor programs.
• Familiarity with digital quality systems (e.g., QMS software, PLM systems, nonconformance tracking tools).

Seniority level

• Not Applicable

Employment type

• Full-time

Industry

• Defense and Space Manufacturing

BAE Systems Strategic Aerospace Services WLL Full time

Subject Matter Expert (SME) - Quality Assurance and Control

We are seeking a highly skilled Subject Matter Expert (SME) in Quality Assurance and Control to lead quality initiatives across defense manufacturing, engineering, and systems integration projects. The ideal candidate will bring deep experience in defense-grade quality systems, regulatory compliance, product validation, and continuous improvement to ensure mission-critical systems meet or exceed performance and safety standards. This role ensures the integrity and reliability of defense products throughout their lifecycle.

Key Responsibilities

• Provide subject matter expertise on quality assurance and control systems, processes, and requirements in accordance with defense and aerospace industry standards.
• Lead the development, implementation, and continuous improvement of quality management systems (QMS), including compliance with ISO 9001, AS9100, and MIL-STD requirements.
• Oversee inspection and testing protocols for components, assemblies, and final products; ensure traceability and documentation accuracy.
• Analyze quality performance metrics, conduct root cause analysis, and implement corrective/preventive actions (CAPA) to resolve non-conformities.
• Collaborate with cross-functional teams-engineering, production, supply chain, and program management-to ensure alignment with quality objectives.
• Review and approve manufacturing process plans, test procedures, and product certifications.
• Conduct supplier quality audits and evaluations; support supplier development and qualification activities.
• Ensure compliance with regulatory and contractual requirements (e.g., ITAR, OFAC, NATO AQAP standards).
• Serve as a primary liaison during customer audits, government inspections, and third-party quality assessments.

Qualifications Required

• Bachelor's degree in Quality Engineering, Industrial Engineering, Mechanical Engineering, or a related field.
• 10+ years of quality assurance/control experience in the defense, aerospace, or high-reliability manufacturing sectors.
• Strong working knowledge of quality systems, auditing practices, and process validation.
• Familiarity with defense industry standards such as MIL-STD-1916, AS9102 (FAI), ISO 9001, AS9100, and NADCAP.
• Experience with quality tools and methods including Six Sigma, FMEA, SPC, MSA.
• Excellent attention to detail, documentation, and communication skills.
• Ability to obtain and maintain a security clearance.

Preferred

• Master's degree or advanced certification in Quality or Engineering Management.
• Professional certifications such as ASQ Certified Quality Engineer (CQE), Certified Quality Auditor (CQA), or Lean Six Sigma Black Belt.
• Experience supporting Department of Defense (DoD), NATO, or defense contractor programs.
• Familiarity with digital quality systems (e.g., QMS software, PLM systems, nonconformance tracking tools).

Overview

We are seeking a highly skilled Subject Matter Expert (SME) in Quality Assurance and Control to lead quality initiatives across defense manufacturing, engineering, and systems integration projects. The ideal candidate will bring deep experience in defense-grade quality systems, regulatory compliance, product validation, and continuous improvement to ensure mission-critical systems meet or exceed performance and safety standards. This role ensures the integrity and reliability of defense products throughout their lifecycle.

Responsibilities

• Provide subject matter expertise on quality assurance and control systems, processes, and requirements in accordance with defense and aerospace industry standards.
• Lead the development, implementation, and continuous improvement of quality management systems (QMS), including compliance with ISO 9001, AS9100, and MIL STD requirements.
• Oversee inspection and testing protocols for components, assemblies, and final products; ensure traceability and documentation accuracy.
• Analyze quality performance metrics, conduct root cause analysis, and implement corrective / preventive actions (CAPA) to resolve non-conformities.
• Collaborate with cross-functional teams - engineering, production, supply chain, and program management - to ensure alignment with quality objectives.
• Review and approve manufacturing process plans, test procedures, and product certifications.
• Conduct supplier quality audits and evaluations; support supplier development and qualification activities.
• Ensure compliance with regulatory and contractual requirements (e.g., ITAR, OFARS, NADCAP AQAP standards).
• Develop training programs and mentoring plans to build internal quality capabilities.
• Serve as a primary liaison during customer audits, government inspections, and third party quality assessments.

Requirements

• Bachelor's degree in Quality Engineering, Industrial Engineering, Mechanical Engineering, or a related field.
• 10+ years of quality assurance/control experience in the defense, aerospace, or high-reliability manufacturing sectors.
• Strong working knowledge of quality systems, auditing practices, and process validation.
• Familiarity with defense industry standards such as MIL-STD-1916, AS9102 (FAI), ISO 9001, AS9100, and NADCAP.
• Experience with quality tools and methods including Six Sigma, FMEA, SPC, MSA.