82 Service Engineer Bms Systems jobs in Qatar

What You Will Do
Our Building Efficiency Division delivers products, services and solutions that increase energy efficiency and lower operating costs in buildings for more than one million customers worldwide.

As BMS Engineer you will report directly to the Operations Team Lead, Aftermarket Controls Segment and will be based in Qatar. You will carry out routine BMS service works on key contracted and mobile sites in Doha, Qatar. You will also be tasked with supporting end users with BMS related requests. As part of the PPM process, you will identify additional corrective, small works (and larger projects for Prime team) opportunities to contribute to the overall target of the team, and own the delivery of the some of the small works' opportunities identified. There is a possibility to join the call out rota to attend BMS emergency callouts supported by out of hours customer support teams.

How You Will Do It

• Carry out all the activities related to site implementation of the BMS system including and not limited to Site co-ordination between Customer, Sub-contractor, Supervisor, and Office team, Field devices (sensors, actuators, meters) Testing / Commissioning, Trouble-shooting and Calibration, Testing / Commissioning of DDC panels, Implementing 3rd Party Integrations such as M-bus, Modbus, BACnet and Lon, Liaise with experts to resolve technical issues at site, Creation of Graphical Pages, Creation and Troubleshooting of safe Controller Logics (Basic Chiller Plant, AHU, VAV, FCU, Pumps),Creation and Submission of As-built Documentation, Final Handover and sign-off to the satisfaction of Customer, Carrying out End-User Training Session
• Respond to BMS callouts where applicable
• Review any site log books during service visits and where time permits, attend to any minor issues during the visit
• Document service visit activities and create a service report - prepare clear and accurate reports on site during the visit
• Reports to also provide recommendations to upgrade, improve or repair clients' BMS via our sales lead process
• Attend regular departmental meetings
• Nurture client and supplier relationships maintaining JCI's revenue stream - develop and maintain relationships with customers, suppliers, and vendors.
• Supervise subcontractors on site whilst performing works on behalf of JCI – electricians, panel manufacturers, etc.
• Configuring the building control systems as defined by the clients' objectives - implementing software program modifications using established standards as required
• Maintaining operation and maintenance documentation to reflect changes to the system.
• Adhering to safety standards and adopt the Zero Harm Mindset including Self leadership towards Health and Safety
• May be required to assist projects team from time to time

Required
What we look for

• 2-4 years' Experience in Control systems/ BMS as a service engineer.
• Engineering graduate with UPDA certificate
• Working knowledge of Metasys systems in both industrial and commercial environments preferred. Basic working knowledge of Easy IO, Niagara N4 will be a plus
• Experience with MCC panels and the ability to understand control panel wiring diagrams
• Basic understanding of mechanical plant operation and control as well as their related electrical systems
• Conversant with CCT and the operation of all aspects of control strategies
• Understanding of BMS networking topologies, building industry standard communication protocols.
• Excellency in verbal and written communication skills, with the ability to communicate technical information to a non-technical audience.
• Confident in IT with working knowledge of all Microsoft packages (MS Office; Outlook, Word, PowerPoint, Excel)
• A proactive approach to ongoing learning is essential, this will be supplemented by formal and on-the-job training.
• Valid Qatar Driving License

Direct message the job poster from Madre Integrated Engineering

• Plan, execute, and supervise BMS installation and commissioning activities.
• Develop and configure BMS software, graphics, and control strategies as per project requirements.
• Perform system integration, testing, troubleshooting, and performance optimization of BMS equipment.
• Ensure all works comply with Siemens standards, project specifications, and safety requirements.
• Collaborate with project managers, consultants, and clients for technical discussions and approvals.
• Provide technical support and guidance to site teams and technicians.
• Prepare project documentation, reports, and handover documents.
• Ensure adherence to HSE regulations and quality standards.

• Bachelor’s degree in Electrical, Electronics, Instrumentation, or Mechanical Engineering.
• Minimum 5+ years of proven experience in BMS engineering, installation, commissioning, and maintenance.
• Hands-on knowledge of Siemens BMS systems will be a strong advantage.
• Proficiency in control schematics, system design, and BMS software configuration.
• Strong analytical, troubleshooting, and problem-solving skills.
• Excellent communication and leadership abilities.
• Valid Qatar Driving License preferred.

• Mid-Senior level

• Full-time

Get notified about new Building Management Systems Engineer jobs in Doha, Qatar.

Requirements & Responsibilities

• Experience in installation and commissioning of Large Format Printers / CO₂ Laser Machines / CNC Routers
• Communicate effectively with clients, understand their concerns, and resolve technical issues
• Provide technical support to clients, answer queries, and offer assistance as needed
• Generate reports on machine performance, issues, and resolutions
• Ability to work independently and in a team environment

• Mid-Senior level

• Full-time

• Engineering and Information Technology

• Advertising Services

JOB CATEGORY

Engineering

POSITION

Service Engineer

YEARS OF EXPERIENCE

5-6 Years

GENDER

Male

SALARY RANGE

QAR 2, - QAR 5,

APPLICANT LOCATION

In-country Hire Only

Description

We are seeking a Service Engineer with proven experience in Water and Wastewater Treatment applications.

At least 5 years of relevant experience with a bachelor’s degree in chemical engineering or chemistry.

Local available in Qatar or GCC Experience with Driving License.

Information

Desired Skills & Experience

Key Responsibilities :

• Install, commission, and service water and wastewater treatment systems at customer sites.
• Conduct preventive and corrective maintenance to ensure optimal performance and compliance with standards.
• Troubleshoot mechanical, electrical, and process-related issues in treatment plants.
• Support clients in system operation, monitoring, and optimization to achieve desired water quality.
• Provide technical guidance and training to plant operators and maintenance personnel.
• Maintain accurate service records, reports, and documentation of site activities.
• Collaborate with project and design teams to implement modifications or system upgrades.
• Ensure adherence to safety, environmental, and regulatory standards during all service activities.
• Address customer queries and generate new inquiries.

Location

View location map Share Tweet

Subscribe to our jobs newsletter

Responsibilities:

• Perform
  installation, commissioning, testing, and maintenance
  of equipment (rotating machinery, pumps, compressors, electrical systems, or process equipment depending on specialization).
• Troubleshoot technical issues, identify root causes, and implement corrective actions.
• Carry out
  preventive and corrective maintenance
  activities as per OEM standards.
• Provide
  on-site technical support and training
  to clients/end-users.
• Prepare detailed service reports, maintenance records, and recommendations.
• Ensure service jobs are completed within the planned schedule and budget.
• Coordinate with spare parts and logistics teams to ensure timely availability of components.

Qualifications & Experience:

• Bachelor's Degree / Diploma in Mechanical, Electrical, Instrumentation, or related engineering field.
• 3–7 years of experience in servicing and maintenance of industrial, oil & gas, marine, or rotating equipment (depending on industry focus).
• Hands-on experience in
  installation, troubleshooting, and repair
  of equipment.
• Familiarity with engineering drawings, schematics, and technical manuals.
• Knowledge of
  diagnostic tools, measuring instruments, and calibration techniques
  .
• Exposure to oil & gas, EPC, shipyard, or heavy industry preferred.

Interested candidates can send their CV & CERTIFICATES to - | - |

(CVs without proper documents like QID, Passport copy, educational & other certificates shall not be considered)