17 Jobs in Umm Sa'id

BAE Systems Strategic Aerospace Services WLL | Full time

Responsibilities:

1. CIPS & DCVG Surveys on pipelines in the Gas Operations network (RLIC, All Eastern Half of Qatar, and MIC).
2. Conventional cathodic protection works such as potential, voltage and current measurements at test points, current drainage sources, continuity bonds, cross bonds, insulating joints and other cathodic protection hardware either as part of routine surveys or troubleshooting.
3. Cathodic Protection Technician shall be capable of creating reports for the surveys including an interpretation of the results and comments and recommendations for remedial action, where appropriate.
4. CONTRACTOR PERSONNEL shall from time to time carry out surveys along pipeline routes on the GDS as part of their duties. For the CP technicians this will be a significant part of their work.

Qualifications:

Diploma in Mechanical / Chemical / Electrical Engineering with 10 years experience or Graduate in Chemical / Mechanical / Electrical Engineering with 5 years experience from a reputed institute.

Cathodic Protection Technicians shall be qualified to NACE CP Technician (CP2) level (or equivalent).

Experience:

The candidate shall have not less than 10 years for Diploma holders / five years for Graduate relevant experience and be fully skilled in carrying out CIPS & DCVG surveys. Age shall be not less than 30 years and not more than 45 years. He shall have the ability to pass QatarEnergy Permit to Work system and Consolidated Permit to Work system.

Shall pass PTW or ePTW as specified by Mesaieed Operations Qatar Energy HSE as required.

Department

MAINTENANCE (REFINING)

Primary Purpose of the Job

Carries out troubleshooting, maintenance, repair, overhaul and calibration of different types of field instruments installed in any plant / unit of QatarEnergy Refinery as assigned by Lead Instrument Engineer.

Required Experience and Skills

• At least 6 to 8 years of experience as Instrument technician in Refinery, Oil & Gas or petrochemical industry with sound knowledge in measurement principles, installation, commissioning, maintenance and overhauling of various field instruments. Knowledge on hazardous area classification, smart field instruments interface with DCS and PLC is desirable.
• Knowledge about International Standards and Best practices of Instrumentation in Refining, Oil& Gas and Petrochemical Industries is an added advantage.
• Should be highly proficient and have excellent command in spoken / written English. Work experience in the Arabian Gulf Countries is desirable.

Educational Qualifications

Diploma in Instrumentation / Control Systems Engineering from a well recognized College / University.

• 15 + years of ERP experience and a minimum of 2 years of implementing and supporting Fusion Cloud applications with previous background of managing Oracle EBS projects
• Minimum 2 Oracle ERP / SCM / HCM Cloud projects successfully executed as a project manager
• Experienced consulting professional with a broad understanding of the solutions, industry best practices, and multiple business processes within the Oracle EBS and Oracle Cloud space.
• MUST have experience in migrating Oracle EBS to Fusion Cloud
• Demonstrated experience as a project manager leading in the definition of systems strategy, gathering and documenting business requirements, leading fit-gap analysis, as-is and to-be business process designs, conference room pilots (CRPs) functional configuration, testing, and client user training.
• Experience in leading, monitoring, and maintaining project plan progress to ensure delivery of the critical stages and goals within the agreed time, cost, and quality constraints.
• Ability to handle the 50+ members of team of functional, technical, admins etc.
• Experience in managing customer expectations and closely monitoring for scope creep. Managing the agreed scope of the project to ensure that Change Requests are clearly called out, approved, and impacted against a timeline.
• Experience in Controlling and Reporting progress to the Steering Group / Sponsor and internally within the Project Team and escalating any issues, as appropriate, in a timely manner. Initiating corrective action where necessary to keep the project on track. Continually assess potential risks and issues and maintain risk and issue logs and contingency plans.
• Experience in PMI or Agile Project Management Methodology to track issues & bugs for greater value addition & customer delight
• Excellent analytical and problem-solving skills
• Fit with company culture and values : teamwork, innovation, integrity, service, “can-do” attitude, and speaking your ideas
• Manage or mentor project team members and mentees
• Be a liaison between offshore and Onsite teams to deliver work successfully
• PM Certification such as PMP or Scrum Master is highly desired.

WHO ARE WE? At Nexans, our global vision is to electrify the future. Within the Group, this means innovating beyond cable to bring differentiation and added value to our customers, through innovative services and solutions. With nearly 28,000 employees in 42 countries, the Group is leading the charge towards the new world of electrification : safer, more sustainable, renewable, decarbonized and accessible to all.Our 'Distribution & Uses' business group stands for reliable cabling systems and smart energy solutions, including electrical accessories, to make buildings and power grids more efficient, people-oriented and sustainable.

WELCOME YOU TO THE TEAM Our story begins in 2008, as a Joint Venture company between Nexans and Al Mirqab Capital and is fully managed by Nexans. We have been involved in many of the country's most ambitious projects, of such well-known end users like Kahramaa, Qatar Rail, Qatar Petroleum, Qatar Foundation, and many others. The plant is among the most advanced Nexans factories in the MENA (Middle-East North Africa) region. Being the worldwide leader in cabling solutions, Nexans has transferred its technology to QICC, which is extremely proud to contribute to the rapid development of Qatar economy aligned with Qatar National Vision 2030.

In order to support the development and operations of the plant, we are looking to fill the position of PURCHASING MANAGER , under the Purchasing department. The Purchasing Manager, based in Mesaieed, Qatar, reports to the Director of Supply Chain & Continuous Improvement and plays a key role in the restructuring of the Purchasing Department. This role is responsible for developing and executing procurement strategies, managing supplier relationships, leading contract negotiations, ensuring policy compliance, and overseeing transactional purchasing processes. The position also includes strategic planning, performance tracking through KPIs, market analysis, and continuous improvement of supplier performance.

In addition to the core responsibilities, the Purchasing Manager is expected to drive operational excellence by aligning local procurement practices with corporate frameworks and regional strategies. They must demonstrate a strong understanding of market dynamics, perform detailed spend and risk analyses, and contribute to financial performance through cost optimization and efficiency improvements. The role involves close coordination with internal stakeholders such as finance and supply chain, ensuring seamless processes from order placement to payment. A proactive mindset, adaptability to change, and the ability to lead and develop a team are essential for success in this position.

EXPERIENCE

• 5 years’ experience (preferably in a cables manufacturing environment).

EDUCATION

Required Skills and Knowledge

FULL RESPONSIBILITIES

STRATEGY & MANAGEMENT

TRANSACTIONAL PURCHASING

MARKET INTELLIGENCE

SUPPLIER MANAGEMENT

Select how often (in days) to receive an alert:

Required experience: Experienced - over 5 years

Reference ID: 78490

WHO ARE WE? At Nexans, our global vision is to electrify the future. Within the Group, this means innovating beyond cable to bring differentiation and added value to our customers, through innovative services and solutions. With nearly 28,000 employees in 42 countries, the Group is leading the charge towards the new world of electrification: safer, more sustainable, renewable, decarbonized and accessible to all.Our 'Distribution & Uses' business group stands for reliable cabling systems and smart energy solutions, including electrical accessories, to make buildings and power grids more efficient, people-oriented and sustainable.

WELCOME YOU TO THE TEAM Our story begins in 2008, as a Joint Venture company between Nexans and Al Mirqab Capital and is fully managed by Nexans. We have been involved in many of the country's most ambitious projects, of such well-known end users like Kahramaa, Qatar Rail, Qatar Petroleum, Qatar Foundation, and many others. The plant is among the most advanced Nexans factories in the MENA (Middle-East North Africa) region. Being the worldwide leader in cabling solutions, Nexans has transferred its technology to QICC, which is extremely proud to contribute to the rapid development of Qatar economy aligned with Qatar National Vision 2030.

In order to support the development and operations of the plant, we are looking to fill the position of PURCHASING MANAGER , under the Purchasing department. The Purchasing Manager, based in Mesaieed, Qatar, reports to the Director of Supply Chain & Continuous Improvement and plays a key role in the restructuring of the Purchasing Department. This role is responsible for developing and executing procurement strategies, managing supplier relationships, leading contract negotiations, ensuring policy compliance, and overseeing transactional purchasing processes. The position also includes strategic planning, performance tracking through KPIs, market analysis, and continuous improvement of supplier performance.

In addition to the core responsibilities, the Purchasing Manager is expected to drive operational excellence by aligning local procurement practices with corporate frameworks and regional strategies. They must demonstrate a strong understanding of market dynamics, perform detailed spend and risk analyses, and contribute to financial performance through cost optimization and efficiency improvements. The role involves close coordination with internal stakeholders such as finance and supply chain, ensuring seamless processes from order placement to payment. A proactive mindset, adaptability to change, and the ability to lead and develop a team are essential for success in this position.

EXPERIENCE

• 5 years’ experience (preferably in a cables manufacturing environment).

EDUCATION

• University or College degree in Procurement, Supply Chain, Finance, Engineering.

Required Skills and Knowledge

• Excellent knowledge of Excel and manufacturing software (Navision).
• IT support knowledge is would be an asset.

FULL RESPONSIBILITIES

STRATEGY & MANAGEMENT

• Adapts the group purchasing 3-5 years strategic plan at Plant level, and leads the execution plan
• Defines objectives for his/her area in alignment with the strategic plan
• Deploys Key Performance Indicators (KPIs) and monitoring within his/her area and coordinates the implementation of improvement action plans
• Implements Group policies and defines local policies and procedures, when applicable
• Ensures compliance with the purchasing process and standards in his/her area
• Leads the identification and mitigation of major local purchasing risks
• Contributes to translate the purchasing performance into financial impacts
• Conducts spend analysis for his/her area
• Leads people development and individual performance assessments

TRANSACTIONAL PURCHASING

• Implements corporate framework agreements and regional contracts at local level
• Participates to purchasing projects, at local level
• Challenges needs expression (redesign-to-cost, functional analysis, standardization,…)
• Defines the supplier panel for consultation
• Conducts Requests for Information/Quotation (Including the definition of a decision matrix)
• Selects suppliers, based on cost breakdown, Total Cost of Ownership and risk analyses,
• Manages contracting and follow up (customization of standard models, deployment, performance measurement)
• Places orders
• Maintain procurement files
• Manages purchasing requests, invoices and payments (reception & validation)
• Reports and manages claims
• Analyzes the gap between Supply Chain procurement forecast and purchasing orders
• Responsible for planning, developing and buying materials, parts, supplies and equipment in a timely and cost effective way; timely manner while maintaining appropriate quality standards and specifications.
• Liaise with Accounts Payable Department to ensure accurate and timely payment of invoices, as necessary for the business with the supplier.
• Keeps informed on market trends (suppliers, products, customers,…)
• Conducts market benchmarks (customers, competitors, suppliers)
• Monitor macro trends in supplier and contract base and implement plans to react.
• Supports the definition of the supplier sourcing strategy, providing information on his/her market

SUPPLIER MANAGEMENT

• Defines the supplier categorization (ABC classification,…)
• Manages the supplier relationships
• Deploys and monitors Key Performance Indicators (KPIs) per category /supplier, reporting gaps between Service Level Agreement (SLA) and supplier performance
• Contributes to the definition and implementation of local supplier Continuous Improvement Programs (CIP)
• Contributes to optimize supplier productivity, participating to annual negotiations on payment terms, storage levels, delivery terms.

The role involves:

1. Bank reconciliations and collection of bank statements.
2. Managing bank correspondence and performance bonds administration.
3. Preparing regular cash flow reports.
4. Administering and reporting insurance claims, declarations, and issuing medical insurance cards.
5. Handling additions & deletions of insurance coverage and reconciling insurance statements.
6. Compiling month-end closing schedules.
7. Raising purchase requisitions and ensuring timely recognition of insurance expenses in the ERP system.

Qualifications & Experience:

Minimum Qualifications:

• Bachelor's degree in commerce or finance.
• Master of Business Administration in Finance (advantageous).

Minimum Experience:

• 6 years of experience in a similar role.

Job-Specific Skills (Generic / Technical):

Proficiency in Oracle ERP & Microsoft Office, with strong and demonstrated experience.

• Plan work activities, lead and support various project teams and liaison with all the stakeholders to ensure execution of assigned project activities to meet set objectives and overcome challenges.
• Carrying root cause analysis, complete the process data sheets with mechanical details to fully detail the equipment specification, perform engineering calculations using software, as per codes and standards.
• Prepare datasheets, specifications and requests for quotation.
• Review and evaluate supplier proposals and prepare bid tabulations.
• Select, size, and determine costs to meet process design and mechanical performance requirements.
• Develop and maintain/update Specifications/standards on engineering practice within the trades, including incorporation of lessons learnt.
• In depth knowledge and hand on experience about the over hauling of steam turbines, compressors, gas turbines, pumps etc.
• Assist with P&ID, 3-D piping model, and HAZOP reviews.
• Conduct design reviews and fabrication inspections, Witness and evaluate performance tests.
• Keep informed of technological developments in the area of responsibility in order to update knowledge, identify and recommend opportunities for increased effectiveness and/or cost reduction.
• Provide technical support to multiple projects and operations, as per the requirement, meeting the required quality of work & schedule
• Support in training of new and/or trainee Engineers to ensure that they are equipped with the necessary skills to independently perform their tasks. Exchange knowledge with colleague Engineers.
  
  

• Bachelor’s degree in mechanical engineering
• In depth technical knowledge of engineering codes and standards (ASME, API, ANSI, IEC, BS, EN etc.) and their application.
• A minimum of 10 years relevant experience as a Rotating/Package Mechanical Engineer, preferably in projects related to petrochemical and/or ammonia / urea manufacturing plants.
• Candidate shall be proficient in the development of datasheets, engineering documents reviews, procurement, and installation of rotating equipment like pumps, compressors, steam turbines, Gas turbines and packaged equipment.
• Demonstrated experience of active role as project engineer for mechanical package design and supply is considered an additional value

BAE Systems Strategic Aerospace Services WLL | Full time

Responsibilities:

1. To monitor and supervise all welding activities within NGL Complex and other BASE LOCATIONs to ensure compliance to QatarEnergy and international codes and standards.
2. To monitor and supervise all associated non-destructive testing activities.
3. To produce daily welding activity logs and reports for entry into the Inspection Management System (IMS) support software for SAP or IMMS.
4. To review and sentence all associated Radiographs and NDT reports.
5. To highlight areas of concern to QatarEnergy Senior Welding Inspector for rejection report generation.
6. To produce rough site isometric sketches of pipelines where required highlighting inspection points, problematic locations, extent of scaffold access and insulation removal requirements.
7. To report to QatarEnergy Senior Welding Inspector.
8. Candidate shall have the ability to pass QatarEnergy Permit to Work system and Consolidated Permit to Work system.

Qualifications:

1. CSWIP 3.2.2 minimum requirement. Diploma in Mechanical Engineering or Bachelor of Engineering in Mechanical Discipline from a reputed institute.
2. The candidate shall be able to communicate fluently in English, both verbally and in writing.
3. The candidate shall be fully familiar with construction drawings, isometric and P. & I.Ds.
4. The candidate shall be computer literate and familiar with MS Word and Excel. He shall be able to work under own initiative.
5. The work entails a high percentage time on site.

Experience:

1. The candidate shall have minimum ten (10) years experience in the oil and gas related business for Diploma holders / five (5) years for Bachelor of Engineering.
2. He shall have proven experience of in-plant/construction welding inspection on oil/gas process facilities.
3. The candidate shall be familiar with NDT techniques and valid level- II NDT certificates.
4. Hold Valid CSWIP 3.2.2 certification for a minimum of three (3) years after certification.
5. Candidate shall have the ability to pass QATARENERGY Permit to Work system and Consolidated Permit to Work system.
6. Shall pass PTW or ePTW as specified by Mesaieed Operations Qatar Energy HSE as required.

• Coordinate and perform/witness all inspection activities related to pressure equipment during fabrication, assembly and testing, and be a focal point for all Requests for Inspections (RFI).
• Ensure compliance with ASME Section VIII, API 510, ASME B31.1, ASME B31.3, ASME B31.8, API 650 and other relevant codes and standards.
• Supervise or witness Non-Destructive Testing (NDT), hydrotesting, and visual inspections.
• Coordinate in criticality ranking of the equipment fabrication based on QAFCO procedures and accordingly assign the Inspection Data Sheet (IDS).
• Coordinate with Asset Integrity Engineers in respective fields in Pre-Project studies to review the performance of the existing equipment and improvements needed.
• Follow up the inspection steps as per ITPs by coordinating contractors, internal as well as third party inspectors.
• Follow-up incoming material inspection in stores according to Company procedures/specifications. Reporting the discrepancies and non-compliances.
• Coordinate with third party inspection agencies to complete the Annual Lifting inspection certification programs. Communicate with the user sections for corrective actions and repairs for recertification. Review/approve contractors Lifting Equipment and Method Statements for critical lifts.
• Review and verify Inspection Test Plans (ITPs), Non-Destructive Testing (NDT) Procedures, Welding Procedure Specifications (WPS), Procedure
• Qualification Records (PQR) and Welding Performance Qualification (WPQ).
• Monitor and control quality records, inspection logs, and deviation reports.
• Review and monitor Non-Conformances and ensure implementation of corrective and preventive action.
• Review Manufacturer Data Records (MDRs), Quality Dossiers, and final documentation for issuance of Release Notes.
• Serve as the main point of contact between Asset Integrity, Engineering, Project, and Third-Party Inspectors.
• Attend quality and production progress meetings and report on inspection statuses and issues.
• Ensure all inspection activities meet the project specification, QAFCO requirements, relevant codes and standards, and regulatory compliance.
• Recommend and implement quality improvements to enhance fabrication efficiency and compliance.
  
  

• Bachelor’s degree in mechanical engineering or related field
• Minimum 8 years of experience direct and related to quality inspection roles, particularly with pressure equipment. Experience working in an EPC environment will be an advantage.
• Familiarity with ASME, API, and ISO quality systems.
• Qualified in API 510& 70, ASNT Level II NDT Certification (e.g., RT, UT, MT, PT) and welding inspection CSWIP 3.1 or AWS CWI.
• Strong knowledge of fabrication processes and sequences, welding and heat treatments, inspection and testing methods, material and its traceability, and good understanding of fabrication drawing.
• Having good knowledge of metallurgy, software tools like AutoCAD, SAP, or QMS platforms and ASME authorized inspector will be an advantage.