17 Commissioning Engineer jobs in Qatar
Commissioning Engineer
Posted today
Job Viewed
Job Description
Job Description
Job Overview:
The Commissioning Engineer applies their conceptual knowledge of Commissioning (Eng) and, with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward Commissioning (Eng) problems. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. The Commissioning Engineer understands critical business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents.
Responsibilities
Key Tasks and Responsibilities:
- Report to the Commissioning Manager and provide support to the Principal Commissioning Engineer in the preparation of home office deliverables
- At the site, participate in walk-down inspections, punch listing, and testing including troubleshooting of mechanical, electrical & instrument component issues that can arise on the project
- Work collaboration within the Project team and with the Client to maintain positive relationships
Required to support the commissioning team with performing any of the following activities as a minimum
Operate and maintain Manuals development
- Commissioning and Start-up Spares development
- First Fills and Consumables development
- Commissioning and Start-Up Procedures
- Discipline Equipment system checks and tests
- Function testing of mechanical, electrical, and instrument systems
- Participate in Commissioning, Start-Up, and Performance Testing
Resolve operational and maintenance issues during Commissioning, Start-Up, and Performance Tests
Supervise craft personnel required for site pre-commissioning and commissioning activities
- Coordinate activities with other engineers in the commissioning team
Reports to:
Project: Project Commissioning Manager
Functional: Function Commissioning Manager
Liaise with: Commissioning Manager, Discipline Lead Engineers, Project Engineers, Construction/Fabrication team
Supervises: Support personnel within the function group
Qualifications
Essential Qualifications and Education:
- Bachelor's degree or equivalent in Engineering
- 3-8 years of experience in oil and gas with a major contractor or consultant
- Requires a good understanding of concepts, principles, and practices in commissioning, completions, and training as well as basic knowledge of other functions, such as construction and operations & maintenance
- Applies understanding of the industry to improve effectiveness
- Preferably possess a degree or diploma or equivalent in engineering
- Have a minimum of 3 years of experience in a chemical, refinery, or oil & gas process facility
- Prefer 2+ years of previous commissioning and start-up experience in the chemical, refinery, or oil & gas industry
- Able to effectively communicate technical solutions and concepts to other engineers and non-engineers
- Must have good computer software skills in MS Word, Excel, PowerPoint, Visio
- Must have good organizational skills and be adaptable to the needs of various discipline groups
- Must have the ability to assess and communicate project requirements and expectations in a clearly defined, positive, and productive manner
- Willing and able to travel to construction sites on assignments to international sites
- Proficiency in English, Multi-Language skills a plus
About Us
Our ingenuity fuels daily life. Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
Commissioning Engineer
Posted today
Job Viewed
Job Description
Job Overview:
The Commissioning Engineer applies their conceptual knowledge of Commissioning (Eng) and, with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward Commissioning (Eng) problems. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. The Commissioning Engineer understands critical business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents.
Our ingenuity fuels daily life. Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
Key Tasks and Responsibilities:
- Report to the Commissioning Manager and provide support to the Principal Commissioning Engineer in the preparation of home office deliverables
- At the site, participate in walk-down inspections, punch listing, and testing including troubleshooting of mechanical, electrical & instrument component issues that can arise on the project
- Work collaboration within the Project team and with the Client to maintain positive relationships
- Required to support the commissioning team with performing any of the following activities as a minimum
- Operate and maintain Manuals development
- Commissioning and Start-up Spares development
- First Fills and Consumables development
- Commissioning and Start-Up Procedures
- Discipline Equipment system checks and tests
- Function testing of mechanical, electrical, and instrument systems
- Participate in Commissioning, Start-Up, and Performance Testing
- Resolve operational and maintenance issues during Commissioning, Start-Up, and Performance Tests
- Supervise craft personnel required for site pre-commissioning and commissioning activities
- Coordinate activities with other engineers in the commissioning team
Reports to:
Project: Project Commissioning Manager
Functional: Function Commissioning Manager
Liaise with: Commissioning Manager, Discipline Lead Engineers, Project Engineers, Construction/Fabrication team
Supervises: Support personnel within the function group
Essential Qualifications and Education:
- Bachelor's degree or equivalent in Engineering
- 3-8 years of experience in oil and gas with a major contractor or consultant
- Requires a good understanding of concepts, principles, and practices in commissioning, completions, and training as well as basic knowledge of other functions, such as construction and operations & maintenance
- Applies understanding of the industry to improve effectiveness
- Preferably possess a degree or diploma or equivalent in engineering
- Have a minimum of 3 years of experience in a chemical, refinery, or oil & gas process facility
- Prefer 2+ years of previous commissioning and start-up experience in the chemical, refinery, or oil & gas industry
- Able to effectively communicate technical solutions and concepts to other engineers and non-engineers
- Must have good computer software skills in MS Word, Excel, PowerPoint, Visio
- Must have good organizational skills and be adaptable to the needs of various discipline groups
- Must have the ability to assess and communicate project requirements and expectations in a clearly defined, positive, and productive manner
- Willing and able to travel to construction sites on assignments to international sites
- Proficiency in English, Multi-Language skills a plus
Commissioning Engineer
Posted today
Job Viewed
Job Description
Job Overview:
The Commissioning Engineer applies their conceptual knowledge of Commissioning (Eng) and, with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward Commissioning (Eng) problems. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. The Commissioning Engineer understands critical business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents.
Our ingenuity fuels daily life. Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
Key Tasks and Responsibilities:
- Report to the Commissioning Manager and provide support to the Principal Commissioning Engineer in the preparation of home office deliverables
- At the site, participate in walk-down inspections, punch listing, and testing including troubleshooting of mechanical, electrical & instrument component issues that can arise on the project
- Work collaboration within the Project team and with the Client to maintain positive relationships
- Required to support the commissioning team with performing any of the following activities as a minimum
- Operate and maintain Manuals development
- Commissioning and Start-up Spares development
- First Fills and Consumables development
- Commissioning and Start-Up Procedures
- Discipline Equipment system checks and tests
- Function testing of mechanical, electrical, and instrument systems
- Participate in Commissioning, Start-Up, and Performance Testing
- Resolve operational and maintenance issues during Commissioning, Start-Up, and Performance Tests
- Supervise craft personnel required for site pre-commissioning and commissioning activities
- Coordinate activities with other engineers in the commissioning team
Reports to:
Project: Project Commissioning Manager
Functional: Function Commissioning Manager
Liaise with: Commissioning Manager, Discipline Lead Engineers, Project Engineers, Construction/Fabrication team
Supervises: Support personnel within the function group
Essential Qualifications and Education:
- Bachelor's degree or equivalent in Engineering
- 3-8 years of experience in oil and gas with a major contractor or consultant
- Requires a good understanding of concepts, principles, and practices in commissioning, completions, and training as well as basic knowledge of other functions, such as construction and operations & maintenance
- Applies understanding of the industry to improve effectiveness
- Preferably possess a degree or diploma or equivalent in engineering
- Have a minimum of 3 years of experience in a chemical, refinery, or oil & gas process facility
- Prefer 2+ years of previous commissioning and start-up experience in the chemical, refinery, or oil & gas industry
- Able to effectively communicate technical solutions and concepts to other engineers and non-engineers
- Must have good computer software skills in MS Word, Excel, PowerPoint, Visio
- Must have good organizational skills and be adaptable to the needs of various discipline groups
- Must have the ability to assess and communicate project requirements and expectations in a clearly defined, positive, and productive manner
- Willing and able to travel to construction sites on assignments to international sites
- Proficiency in English, Multi-Language skills a plus
Commissioning Engineer
Posted today
Job Viewed
Job Description
Job Overview
JOB DESCRIPTION
The Commissioning Engineer applies their conceptual knowledge of Commissioning (Eng) and, with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward Commissioning (Eng) problems. They will be responsible for analyzing possible solutions using standard procedures and building knowledge of the company, processes, and customers. The Commissioning Engineer understands critical business drivers and applies this knowledge to solve problems in straightforward situations by analyzing possible solutions using technical experience, judgment, and precedents.
Responsibilities
Key Tasks and Responsibilities
- Report to the Commissioning Manager and provide support to the Principal Commissioning Engineer in the preparation of home office deliverables
- At the site, participate in walk-down inspections, punch listing, and testing including troubleshooting of mechanical, electrical & instrument component issues that can arise on the project
- Work collaboration within the Project team and with the Client to maintain positive relationships
Required to support the commissioning team with performing any of the following activities as a minimum
Operate and maintain Manuals development
- Commissioning and Start-up Spares development
- First Fills and Consumables development
- Commissioning and Start-Up Procedures
- Discipline Equipment system checks and tests
- Function testing of mechanical, electrical, and instrument systems
- Participate in Commissioning, Start-Up, and Performance Testing
Resolve operational and maintenance issues during Commissioning, Start-Up, and Performance Tests
Supervise craft personnel required for site pre-commissioning and commissioning activities
- Coordinate activities with other engineers in the commissioning team
Reports to:
Project: Project Commissioning Manager
Functional: Function Commissioning Manager
Liaise with: Commissioning Manager, Discipline Lead Engineers, Project Engineers, Construction/Fabrication team
Supervises: Support personnel within the function group
Qualifications
Essential Qualifications and Education
- Bachelor's degree or equivalent in Engineering
- 3-8 years of experience in oil and gas with a major contractor or consultant
- Requires a good understanding of concepts, principles, and practices in commissioning, completions, and training as well as basic knowledge of other functions, such as construction and operations & maintenance
- Applies understanding of the industry to improve effectiveness
- Preferably possess a degree or diploma or equivalent in engineering
- Have a minimum of 3 years of experience in a chemical, refinery, or oil & gas process facility
- Prefer 2+ years of previous commissioning and start-up experience in the chemical, refinery, or oil & gas industry
- Able to effectively communicate technical solutions and concepts to other engineers and non-engineers
- Must have good computer software skills in MS Word, Excel, PowerPoint, Visio
- Must have good organizational skills and be adaptable to the needs of various discipline groups
- Must have the ability to assess and communicate project requirements and expectations in a clearly defined, positive, and productive manner
- Willing and able to travel to construction sites on assignments to international sites
- Proficiency in English, Multi-Language skills a plus
About Us
Our ingenuity fuels daily life. Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
Commissioning Engineer - Instrument
Posted 1 day ago
Job Viewed
Job Description
Key Responsibilities
Provide technical support and assure operations team in the instrumentation &, control systems, and telecommunication engineering for the assigned projects, to achieve the required technical quality and integrity of work while considering projects, operations, maintenance, asset integrity, HSE, ICT, cyber security requirements and objectives in terms of safety, time and cost
Provide support to senior instrument engineer for implementing upgrade projects
Assists the senior project engineer in developing a commissioning strategy and commissioning execution plan
Responsible for coordinating and executing control system commissioning activities, and systems completion activities required at the site as per the commissioning plan
Ensures alignment with project engineering, construction, quality, procurement and start-up/operations
Assists in the seamless transition of the facilities from project to operations
Coordinates and interfaces with operations & maintenance to ensure construction and operations are fully conversant with commissioning strategy, commissioning plan and the completion of the system
Monitors static and dynamic commissioning activities, and assists in the resolution of systems completion-related M&P issues to ensure satisfactory quality is attained
Coordinates systems completion interfaces between various parties to facilitate successful commissioning and hand-over
Supervise commissioning activities, participate in line walks, and witness inspections to ensure that work is conducted safely and properly in accordance with the commissioning plan
Coordinates the contribution of the project construction team during the commissioning execution
Under the general supervision of the commissioning engineer, make the decisions on the project issues within the framework of respective contract documents and client procedures/guidelines, in close coordination and concurrence with the project team and senior project engineer
Accountable for efficiently coordinating control system pre-commissioning & commissioning activities in accordance with QP policies and procedures
Frequent long working hours may be required which include outdoor fieldwork
Exposed to multi-disciplinary, multi-cultural environment requiring special coordination and expediting skills
Attend site survey, pre-tender meetings, management meetings and FAT/SAT/RA/HAZOP for the assigned projects
Identifies potential hazards during engineering activities (as applicable) such as document review, design safety review workshop, HAZID, ENVID, HAZOP, QRA, FERA, etc, participate in technical meetings, commissioning activities, FAT/SAT, plant pre-start-up safety audits, performance tests raise punch lists and encounter issues that are instrumentation system control and cover a broader range involving the technical aspects of the discipline, personnel, scheduling activities, etc
Deal with both routine and complex issues requiring good problem-solving skills
Analyze and resolve contentious issues relating to various instrumentation projects managed and supervised
Carry out diagnostic and troubleshooting activities, and forward relevant reports with recommendations to line management
Encounter situations where several solutions may be possible, requiring good analysis, reasoning, and judgment to resolve complex problems
Interact and interface with contractors, and other projects/departments regularly to identify and resolve problems for one or more projects
Appreciation of asset holders' operational and maintenance requirements, and contractual requirements, including awareness of client interests
Liaises with engineers of other divisions of the department such as operation, maintenance, safety, and inspection for execution interconnection and tie-in required with existing system
Provide supervision/co-ordination of control and instrument modification work undertaken by external consultants/contractors
Participate in the work of mandatory safety checks, including testing and checking of the system and units, integrity of hazardous area equipment
Ensure scope preparation completeness review and hands-on experience in DCS, ESD, fire & gas, SCADA systems, SIL ratings, SIF, field instrumentation, cabling, junction boxes, local control panels, field HMIS, transmitters, detectors, vibration probes, thermowell, fibre optic cables, communication converters, metering systems, field panels, control valves, loop checks, marshalling panels, system cabinets, PLC cabinets, CPU IOS, MODBUS, operator consoles, PAGA system, RTU, RF, microwave radios, switches, servers, NTP servers, GSM modems etc
Verify and review technical design documents in accordance with approved standards and to meet operations, maintenance, asset integrity, HSE, ICT and cyber security requirements
Requirements
Bachelor's Degree in Instrument & Control Engineering Chartered Engineer status or equivalent is preferable
Plus, relevant courses in Instrumentation, Control and Safety Systems
Possess good communication, and presentation skills and fluent in English language (oral & written), also computers literacy is essential
Minimum of Ten (10) years' experience in Control & Instrument Engineering and maintenance works in the Oil & Gas/Petrochemical industry with at least Five (5) years' experience in the design and development of Instrument & Control Projects
Experience in implementation and maintenance of Distributed Control Systems, Pneumatic Control Loops, Electronic Instrumentation, Fire and Gas Systems, Emergency Shutdown Systems, PLCs, Plant and Personnel Safety Systems
Good knowledge of various field instrumentation, including Analytical equipment, Vibration and Package Control systems
Experience in managing, controlling, and coordinating multiple workforces, contractors etc
Awareness on Cyber security and Qatar Civil defense requirements
Exposure to international consulting companies, and EPIC contractors with projects' pre-commissioning, commissioning, start-up and Hand-over activities is an added advantage
Skill/knowledge of International, Shell DEPs and/or QP standards related to his area of expertise and Design Software related to Instrument & Control Engineering
Exposure to international consulting companies, and EPIC contractors with projects' pre-commissioning, commissioning, start-up and Hand-over activities is an added advantage
Possess sound fundamentals in his discipline area Shall possess very good technical skills in his discipline
Good knowledge of engineering and instrumentation standards, quality control, safety, and environmental awareness
Ability to interpret methods statements, construction schedules and drawings
Good supervisory, planning and coordination skills
Good communication and report-writing skills
Ability to highlight potential bottlenecks/problems
*Only applicants meeting the strict criteria outlined above will be contacted as part of the shortlisting process.
BH-MS0947
Bounty Hunter World
SCMS commissioning Engineer
Posted today
Job Viewed
Job Description
Job Opportunity: SCMS Commissioning Engineer ( Kahramaa permit)
Location: Qatar
Profession (Category): Engineering & Commissioning
Experience Level: 5 years
Budget :Open
Job Schedule: Full-Time
Remote: (Onsite/Hybrid )
⸻
The Opportunity
We are seeking a skilled SCMS Commissioning Engineer to handle service and commissioning activities. The role involves ensuring projects are completed efficiently, aligned with contract specifications, quality standards, and safety requirements. The candidate must bring strong technical expertise and prior Kahramaa experience.
⸻
Key Responsibilities
• Prepare project documentation for FAT & SAT and SCMS testing with SCADA.
• Lead control system FAT & SAT activities, securing approvals from utilities for design and commissioning.
• Build strong customer relationships by clearly explaining technical solutions.
• Configure, test, and commission Micro Scada / ABB SCS systems.
• Execute IET600 engineering, signal testing with consultants, and prepare red-markup drawings.
• Perform 104 signal testing and SAT functionality testing.
• Ensure compliance with end-customer safety rules and secure LOA permits.
• Adhere to client HSE policies and mitigate potential hazards onsite.
• Collaborate with the team lead and independently resolve snag list issues.
• Deliver final project documentation (as-built, O&M), obtain TOC, and support contractual closing.
⸻
Qualifications & Experience
• Bachelor's/Master's degree in ECE / EEE / E&I / I&C.
• Minimum 5 years' experience in substation automation, control & protection.
• Strong product knowledge: HITACHI/ABB & third-party systems.
• Hands-on expertise with communication protocols: IEC104, IEC61850, MODBUS, SCMS TCP/IP/Serial, DLMS, IEC PRP/HSR).
• Solid understanding of switches and Fortinet firewalls.
• Proven experience with IED integration into SCMS/SCADA & Micro SCADA Pro systems.
• Ability to work independently, analyze projects technically & commercially, and thrive under pressure.
• Excellent verbal & written communication in English.
• Preferred:
• Kahramaa-approved SCMS LOA holder.
• Valid Qatar driving license.
Equal Opportunity Statement
We are an equal opportunity employer and value diversity in our workforce. All qualified applicants will be considered for employment without regard to race, color, religion, gender, national origin, age, disability, or any other status protected by applicable law.
bms commissioning engineer
Posted today
Job Viewed
Job Description
Job Overview
We are seeking a skilled BMS Commissioning Engineer to join our dynamic team. The ideal candidate will be responsible for overseeing the commissioning process of complex electrical and mechanical systems, ensuring that all components are functioning correctly and efficiently. This role requires a strong background in electrical engineering, system design, and project management, along with proficiency in various engineering software and tools.
Responsibilities
- Conduct thorough testing and validation of electrical systems and components to ensure compliance with specifications.
- Develop and implement project schedules to meet deadlines while coordinating with cross-functional teams.
- Perform root cause analysis on system failures and implement corrective actions to enhance system reliability.
- Utilize AutoCAD, Revit, and MicroStation for designing schematics and layouts of electrical systems.
- Collaborate with manufacturing teams to ensure proper assembly of PCBs and SoCs, applying knowledge of surface mount technology.
- Engage in debugging processes using tools such as oscilloscopes, ohmmeters, and vision inspection systems.
- Create detailed documentation for system designs using MATLAB, Python, C++, and other scripting languages as necessary.
- Provide support in the development of firmware for programmable logic controllers (PLCs) and other embedded systems.
- Assist in the integration of FPGA designs into larger systems while ensuring adherence to NEC standards.
Requirements
- Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field.
- Strong knowledge of electrical systems design principles and practices.
- Proficiency in CAD software including AutoCAD, SolidWorks, Revit, MicroStation.
- Experience with FPGA programming and debugging techniques.
- Familiarity with signal processing concepts and tools.
- Understanding of quantum engineering principles is a plus.
- Knowledge of project scheduling methodologies and tools.
- Hands-on experience with soldering techniques and surface mount technology assembly processes.
- Ability to work collaboratively within a team environment while managing multiple projects simultaneously.
- Excellent problem-solving skills with a focus on root cause analysis. If you are passionate about engineering solutions that drive innovation and efficiency within complex systems, we encourage you to apply for this exciting opportunity as a Commissioning Engineer.
Job Type: Full-time
Be The First To Know
About the latest Commissioning engineer Jobs in Qatar !
Mechanical Commissioning Engineer
Posted today
Job Viewed
Job Description
Hiring: Mechanical Commissioning Engineer
Location: Ras Laffan
Duration: 1-Year Contract
Mobilization: Immediate
Must have: Valid QID & Free Visa
Industry: Oil & Gas / Petrochemical / Refinery
Key Responsibilities:
Lead pre-commissioning & commissioning of static and rotating equipment.
Review P&IDs, isometrics & datasheets.
Coordinate with QA/QC & operations for system readiness.
Conduct mechanical completion, flushing, leak testing & handover documentation.
Ensure HSE & quality compliance.
Requirements:
Bachelor's in Mechanical Engineering.
5–10 yrs experience in Oil & Gas / Refinery projects.
Strong in mechanical commissioning & system turnover.
Knowledge of ASME/API standards & PTW systems.
EPC or brownfield project experience preferred.
Send CVs to:
WhatsApp:
Job Type: Full-time
Testing & Commissioning Engineer
Posted today
Job Viewed
Job Description
Location
Doha, Qatar
Experience
Job Type
Recruitment
Job Description
Job Purpose:
To contribute to the development of projects and deliver various parts of the projects relating to the engineering discipline, within the set parameters such as time, quality and cost to ensure customers' and contractors' satisfaction at all times. To test & commission the equipments that is used to monitor and control the DC plant and provide technical expertise whilst ensuring that the systems and processes operate effectively, efficiently, and safely.
Key Accountabilities:
- Implement the day-to-day operations assigned for the department to ensure compliance with the established standards and procedures.
- Oversee the operation and control of the equipment's functionality associated with the DC plants.
- Assist in designing plant-wide redundant automation and integration commissioning work for all plants whilst handling automation vendor to execute commissioning works within stipulated time and compliance to specifications.
- Provide input to value engineering activities in order to support in identifying the most appropriate delivery methods in line with quality expectations and ensure cost effectiveness.
- Support the development of project scope of work and tender documentation in line with project objectives and requirements.
- Provide support to the concerned stakeholder in planning and executing project plans ensuring alignment to project scope of work.
- Supervise and monitor contractors work on a regular basis, coordinate activities, and resolve issues in order to ensure projects are executed as per the work schedule and quality standards.
- Assess project deliverables to check progress and ensure they meet project requirements and conduct initial evaluation of scope variation requests.
- Develop regular project related reports to reflect status of work and project issues or deviations.
- Ensure project documentation is effectively maintained in line with document control processes.
- Lead software engineers to develop application software by providing detailed task breakdown for PLCs & HMIs and ensure the standardization is compiled.
- Responsible from SCADA integration and monitoring from electrical system such as Transformer, MV & LV panels, motor control center, 11K switchgear, VFD, and soft starter panel.
Minimum Qualifications:
- Bachelor's degree in Instrumentation, Communications, Electrical, Electromechanical Engineering or a related field
- A professional accreditation is preferred
Minimum Experience:
- Minimum 5 years of relevant work experience in designing instrumentation and controls, preferably in a systems integration or consulting engineering role in GCC
- Automation / Control Systems project engineering experience
Job-Specific Skills (Generic / Technical):
- Strong communication and inter-personal skills
- Strong analytical and problem-solving skills
- Familiarity with industry practices, local regulations, specifications, international standards, and new technologies
- Good knowledge of QA/QC processes in construction management
- Good knowledge of industry practices, local regulations, specifications, international standards and new technologies
- Computer literacy (AutoCAD and Microsoft Office in particular)
KEY ACCO
Senior Commissioning Engineer
Posted today
Job Viewed
Job Description
Job Overview:
The Senior Commissioning Engineer uses best practices and knowledge of internal or external issues to improve the Commissioning discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Commissioning discipline. The Senior Commissioning Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. They impact a range of customer, operational, project, or service activities with the Commissioning team and other related teams and ensure that they are working within the appropriate guidelines and policies.
Our ingenuity fuels daily life. Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
Key Tasks and Responsibilities:
- Report to the Commissioning Manager and provide support to the Principal Commissioning Engineer in the preparation of home office deliverables
- At the site, the Senior Commissioning Engineer will participate in walk-down inspections, punch listing, and testing including troubleshooting of mechanical, electrical & instrument component issues that can arise on the project
- Work collaboration within the Project team and with the Client to maintain positive relationships
- Required to support the commissioning team with performing any of the following activities as a minimum
- Operate and maintain Manuals development
- Commissioning and Start-up Spares development
- First Fills and Consumables development
- Commissioning, and Start-Up Procedures
- Discipline Equipment system checks and tests
- Function testing of mechanical, electrical, and instrument systems
- Participate in Commissioning, Start-Up and Performance Testing
- Resolve operational and maintenance issues during Commissioning, Start-Up, and Performance Tests
- Supervise craft personnel required for site pre-commissioning and commissioning activities
- Coordinate activities with other engineers in the commissioning team
Reports to:
Project: Project Commissioning Manager
Functional: Function Commissioning Manager
Liaise with: Commissioning Manager, Discipline Lead Engineers, Project Engineers, Construction/Fabrication team
Supervises: Commissioning Engineers, Completions Specialists, Operation & Maintenance specialists, Designers, and support
personnel within the function group
Essential Qualifications and Education:
- Bachelor's degree or equivalent in Engineering
- 8-15 years of experience in oil and gas with a major contractor or consultant
- Requires a good understanding of concepts, principles, and practices in commissioning, completions, and training as well as basic knowledge of other functions, such as construction and operations & maintenance
- Applies understanding of the industry to improve effectiveness
- Preferably possess a degree or diploma or equivalent in engineering
- Have a minimum of 5 years of experience in a chemical, refinery, or oil & gas processing facility
- Prefer 2+ years of previous commissioning and start-up experience in the chemical, refinery, or oil & gas industry
- Able to effectively communicate technical solutions and concepts to other engineers and non-engineers
- Must have good computer software skills in MS Word, Excel, PowerPoint, and Visio
- Must have good organizational skills and be adaptable to the needs of various discipline groups
- Must have the ability to assess and communicate project requirements and expectations in a clearly defined, positive, and productive manner
- Willing and able to travel to construction sites on assignments to international sites
- Proficiency in English, Multi-Language skills a plus