686 Design Engineer Mep jobs in Qatar

Senior MEP Design Engineer (FEED/Detailed Engineering)

Duration: 1 Year (Extendable)
Location: Doha, Qatar
Client: One of the leading Oil & Gas consultants in Qatar

Role Summary

Seeking a highly experienced Senior MEP Engineer with 12+ years of consultancy background specializing in front-end engineering design (FEED) and detailed engineering for oil & gas projects. This position focuses strictly on engineering design and documentation.

Responsibilities

• Lead preparation and review of MEP design drawings (mechanical, electrical, plumbing) for major oil & gas facilities
• Conduct load calculations, layout development, equipment sizing, schematic diagrams, and detailed specifications
• Coordinate design inputs with architectural, structural, and civil disciplines to ensure integrated solutions
• Ensure designs comply with Qatari codes, international standards, and client project requirements
• Produce comprehensive BOQs, technical documentation, and design reports for FEED and detailed engineering phases
• Facilitate technical design meetings and provide clarifications during project stages
• Review and approve contractor/shop drawings related to MEP scope

Qualifications

• Bachelors degree in Mechanical/Electrical Engineering or related discipline
• Minimum 12 years+ experience in a design-focused role at consultancy firms, primarily within oil & gas sector
• Proven expertise in FEED and detailed engineering deliverables for complex oil & gas projects
• Proficiency in AutoCAD, Revit, and other MEP design software
• Deep knowledge of local regulations (QCS), and international standards (ASHRAE, NFPA, IEC)
• MMUP/UPDA certification or equivalent preferred

Note: We will only consider profiles with a focus on design engineering and oil & gas consultancy firms' experience. Profiles related to maintenance/supervisor, or site-related, are not considered for this position.

Senior MEP Design Engineer (FEED/Detailed Engineering)

Duration: 1 Year (Extendable)

Location: Doha, Qatar

Client: One of the leading Oil & Gas consultants in Qatar

Role Summary

Seeking a highly experienced Senior MEP Engineer with 12+ years of consultancy background specializing in front-end engineering design (FEED) and detailed engineering for oil & gas projects. This position focuses strictly on engineering design and documentation.

Responsibilities

• Lead preparation and review of MEP design drawings (mechanical, electrical, plumbing) for major oil & gas facilities
• Conduct load calculations, layout development, equipment sizing, schematic diagrams, and detailed specifications
• Coordinate design inputs with architectural, structural, and civil disciplines to ensure integrated solutions
• Ensure designs comply with Qatari codes, international standards, and client project requirements
• Produce comprehensive BOQs, technical documentation, and design reports for FEED and detailed engineering phases
• Facilitate technical design meetings and provide clarifications during project stages
• Review and approve contractor/shop drawings related to MEP scope

Qualifications

• Bachelor's degree in Mechanical/Electrical Engineering or related discipline
• Minimum 12 years+ experience in a design-focused role at consultancy firms, primarily within oil & gas sector
• Proven expertise in FEED and detailed engineering deliverables for complex oil & gas projects
• Proficiency in AutoCAD, Revit, and other MEP design software
• Deep knowledge of local regulations (QCS), and international standards (ASHRAE, NFPA, IEC)
• MMUP/UPDA certification or equivalent preferred

Note: We will only consider profiles with a focus on design engineering and oil & gas consultancy firms' experience. Profiles related to maintenance/supervisor, or site-related, are not considered for this position.

Job Types: Full-time, Contract

Contract length: 12 months

Application Question(s):

• Do you have work experience with a consultancy-based oil & gas company?

Experience:

• Oil & Gas Consultancy Based: 10 years (Required)
• FEED and Detailed Engineering: 10 years (Required)

• Onshore Oil and Gas

• Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors
• Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice
• Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market
• Life Insurance ; Provides payment of 2 x Base Salary (up to a maximum of QAR 1 million) upon death
• End of Service Gratuity ; In line with Qatar Labor Law, upon completion of 1 years' service employees are eligible for an End of Service benefit of three weeks for every year of service.
• Medical Insurance : Ensures cover (up to a maximum of QAR 250,000 per person, per year) is available should you require treatment. Pre-existing and/or chronic conditions are covered up to QAR 10,000.
• Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social & financial well-being.
• Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.
• Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our professionOffshore Oil and Gas

• Self-starter and an ability to produce electrical deliverables with little input or guidance
• Good understanding with respect to international codes and standards along with their application
• High level of competency with respect to electrical system design (Single line diagrams (SLD's), protection and control schemes for example)
• Experience of developing and issuing the following deliverables - Electrical Design Basis, Specifications and Standards, Load Schedules, SLD's, Protection and metering schemes, Calculations (Load, cable sizing, battery, equipment sizing), familiarity with power system studies (short circuit, load flow, transient, motor starting and harmonic studies), relay settings, power adequacy, lighting/earthing/lightning protection deliverables, electrical layouts (equipment, cable, tray, duct and trench), checking of area classification layouts, data sheets for major equipment and preparation of enquiry packages for HV and LV switchgear, transformers, drive systems, UPS
• Reviewing and checking of these electrical deliverables to ensure accuracy and alignment with the scope of work prior to issue
• Familiarity with SKM, ETAP or SPEL software packages
• May serve as the Lead Engineer and/or discipline technical authority when required on small to medium complexity projects. In such capacity will take responsibility and ownership for cost, schedule, resource allocation and risk
• May supervise a small work group consisting of engineers and designers with some coaching from Lead Engineer, or may provide advice and guidance in area of specialisation to others
• Assist in performing managerial tasks as requested, such as assigning tasks to engineers; planning and coordinating portions of the engineering work; preparing scopes, schedules, and budgets; attending project meetings; and developing lesser-experienced technical professionals
• Takes responsibility and ownership for challenging electrical engineering tasks and capable of delivering scope for an area on large and/or complex projects
• Review Vendors' quotations prepare technical quotation evaluation and recommend the final technically acceptable Vendor, in conjunction with Materials Management Department commercial quotation evaluation. Technically approve Order Variation Summaries
• Prepares and develops material take off for the electrical discipline
• Hold co-ordination meetings and engineering review meetings with Vendors of major equipment as required
• Participates in project reviews, design reviews, audits and other workshops as required
• Strong understanding of plant design and equipment layout
• Liaise with clients on technical matters where required
• Completion of site surveys and data gathering for brownfield scope of work, taking responsibility for development of the site survey report
• To provide relevant knowledgeable practical skills in the response and actions for Site visits and site surveys, Site queries and discussions, Supplier, vendor, contractor, client and site related discussions and Site based activities
• Demonstrate appreciation of commercial and technical risks, managing these appropriately within the scope of work and highlighting any significant issues to the Lead Engineer

• Engineering Degree majoring in Electrical Engineering with a minimum of 8-12 years of relevant experience
• Enrolled on the Register of Engineers in the State of Qatar, Grade A Category as a mandatory requirement
• If not enrolled on the Register of Engineers in the State of Qatar, then candidates must be a Chartered Engineer
• Proven core Electrical Engineering skills, including design experience in the Oil & Gas sector
• Experience of working in a variety of projects and phases, including greenfield and brownfield, on and offshore, Pre-FEED through to EPC, with a focus on offshore upstream.
• Familiarity with electrical design tools such as SPEL and Aveva Electrical
• Experienced with Electrical HAZOP / SAFOP completion
• Ability to impact and influence fellow workers, with experience of leading more junior engineers and designers for the completion of discipline deliverables
• Demonstration of customer focus and ability to respond to customer needs whilst achieving project and corporate objectives
• Display analytical and innovation skills to manage new technology

Overview

Electrical Engineer vacancy in Lusail, Qatar

Electrical Engineer, Lusail, Qatar

• Design, develop, test, and maintain electrical systems and components.
• Create schematics; troubleshoot issues with existing systems.
• Evaluate new technologies and provide guidance on product design.
• Ensure that all projects are completed within budget and on time.
• Work as a team player and also collaborate with other team members as needed.

• Experience in electrical engineering and ability to analyze electrical systems and components.
• Strong understanding of electrical engineering concepts and familiarity with industry standards and regulations.
• Willingness to work as part of a team and independently when required.
• Preference for candidates who are nationals of India or from surrounding countries; visa sponsorship is offered for the successful candidate.
• No prior experience is necessary; however, we would consider candidates with relevant experience.

Electrical Engineer vacancy in Doha Qatar

Overview: Doha city looking for a worker. Electrical Engineer, salary 3300$, requirements include experience; the information indicates possible help with getting to Qatar, processing, visa considerations (with or without), and a contract with the employer. Accrued salary 1-2 times a month on hand. The work is described as difficult but conditions are comfortable. We will advise you free of charge.

Information:

• help get to Qatar
• possible processing
• consider with visa and without
• contract with the employer
• Experience required

We receive calls during business hours. Our email: DON'T MISS, left 7 work places.

Qualifications :

• Bachelor’s Degree in Electrical Engineering
• MME (UPDA) certified
• Kahramaa Grade A license

Experience :

Specialized Skills :

Key Responsibilities :

We are looking for an Electrical Engineer to join our team in Doha, Qatar.

The ideal candidate will have a Bachelor's degree in Electrical Engineering or equivalent and be a highly motivated self-starter. We are open to considering immigrant applicants for this full-time position, which offers a salary of 1500 QAR per month.

The successful candidate will be responsible for designing, developing, maintaining, and troubleshooting electrical systems and components in domestic and commercial applications. Responsibilities include creating wiring diagrams, schematics, electrical control systems, ensuring system safety, performing preventive maintenance, and overseeing installation and commissioning of new equipment.

This role requires excellent problem-solving skills, strong written and verbal communication skills, and good customer service abilities. The candidate must be able to work independently or as part of a team. Knowledge of industry codes and standards (e.g., National Electric Code), electronics theory, mathematics, and testing procedures is also required.

Minimum work experience is preferred; relevant internships or apprenticeships will be considered. If you meet these qualifications, please apply now!

This job has no reviews yet. You can be the first!

Users also frequently search in these cities: