46 E 7 Aircraft jobs in Qatar

The Aircraft Servicer services aircraft, performing any combination of the following tasks, directs incoming and outgoing aircraft near terminal or flight line parking area to assist pilot's maneuvering of the aircraft on ground, using hand or light signals or drives light truck with guiding sign, and secures aircraft in parking position with aircraft wheel chocks, installs landing gear and safing pins.

Principal Accountabilities
(Typical duties include the following, although specific duties vary by assignment or contract)

• Operates service vehicles to replenish water, waste system chemicals (at select locations).
• Assists with refueling, defueling and towing aircraft (tow vehicle operator).
• Operates ground support equipment such as electrical power carts, engine starting carts, air conditioning carts, nitrogen carts, oil and hydraulic carts for serving aircraft.
• Examines tires for specified air pressure and condition.
• Positions boarding platforms to unload or load aircraft passengers (stair case truck).
• De-ice aircraft wings and assemblies (select locations).
• Extract engine oil samples when required and provide to NDI for analysis.
• Coordinates via land mobile radio with air traffic control for follow me and towing of aircraft to designated parking spots.
• Retrieve Drag chutes and return to owning maintenance unit.
• Coordinates with base supply in ordering parts for aircraft.
• Perform other duties as assigned.

Knowledge & Skills

• Ability to communicate effectively both orally and in writing
• Knowledge of safety and security regulations, practices, and procedures
• Additional knowledge/skill requirements may be required by assignment or contract

Experience & Education

• Federal Aviation Administration (FAA) airframe / Power plant license or DD 214 with documentation reflecting aircraft maintenance experience.
• High school diploma or equivalent
• Additional experience/education may be required by assignment or contract

Physical Requirements/Working Environment

• Living and working conditions at assignment location could be remote and uncomfortable
• Long hours, exposure to weather, dust, and hazardous/harsh conditions
• Personnel should be aware of moving on short notice and under adverse condition
• Must be able to obtain and maintain a Secret Clearance; note: US Citizenship is required to obtain a Secret Clearance

Travel

• Ability to travel domestically and internationally

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Job title

Aircraft Mechanic | Engine Shop

Ref #

Location

Qatar - Doha

Job family

Engineering

• Closing date: 09-Oct-2025

About the role

We are recruiting for Aircraft Mechanic - Engine Shop to be based in Doha, Qatar.

Aircraft Mechanic - Engine Shop will ensure that all scheduled and unscheduled requirement on bore scope tasks, spare engines /APU tasks such as engine build up, receiving inspection, dispatch inspection, cannibalization of engine parts on AOG situation, spare engine storage and tool housekeeping with in engine facility is performed to the highest possible maintenance standards.

Specific responsibilities of the role include:

Operational

• Performing maintenance tasks such as inspections, component replacements, servicing , QEC build up, modifications, minor repair of engines and APUs as directed by a licensed Engineer or Lead mechanic
• Adhering to all pertinent safety precautions as published in manufacture's and company relevant publications on all tasks in relation to the accomplishment of scheduled, unscheduled 'Borescope inspections and engine build up tasks.
• Responsible for a quick Engine change build up to ensure availability of ready for installation Power plant to support aircraft operation.
• Responsible for engine Fan case Split / mate to support hot spare availability.
• Ensures Engine Module R/I within company capability register.
• Maintains critical engine defect rectification in light, heavy and Doha line to ensure operational reliability.

About you

The successful candidate will have the following skills and qualifications:

Qualifications and Experience:

• Diploma in Aircraft Maintenance or Trade or vocational aircraft maintenance qualification or Degree (B.Eng., BSc) or equivalent in aircraft engineering.
  
  ICAO Type 2 Basic license with minimum 5 years Aircraft Maintenance experience (including apprenticeship).
• Qatar Airways fleet engine Type Engine maintenance Experience.
• Airbus and Boeing documentation experience.
• Engine Module / Removal.
• Bore scope support experience.
• V2500, Trent 500, GE CF6-80E1, GE90, GENx, GP7000, Trent XWB build up and Maintenance experience will be an added advantage.
• Bore scope support experience for V2500, Trent 500, GE CF6-80E1, GE90, GTCP /350 and APS3200, GE Nx, GP7000 will be an added advantage.
• Engine Module Removal / Installation Experience.
• Engine Shop Experience.

About Qatar Airways Group

Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We've grown fast, broken records and set trends that others follow. We don't slow down by the fear of failure. Instead, we dare to achieve what's never been done before.

So whether you're creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

How to apply

If you have what it takes to be part of our 5-star team, please take the first step and apply now by uploading your CV and completing the online application.

About Qatar Airways Group

Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We've grown fast, broken records and set trends that others follow. We don't slow down by the fear of failure. Instead, we dare to achieve what's never been done before.

So whether you're creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

About the role

You will be responsible to ensure that all scheduled and non-scheduled Aircraft equipment maintenance tasks are carried out under the supervision of GSE Shift leader to the highest possible standard. All maintenance (periodic and corrective) should be performed as per manufacturer maintenance manuals and Part 145 A/C equipment workshop procedures, in the most productive and cost-effective manner using the available resources. Responsible for all required work in accordance with approved technical data and QR standards and procedures to the highest shop practices and in the interest of safety of aircraft equipment. Responsible for the completion of any assigned tasks within the frame work of procedures and set time frames by performing effectively with an environment of time constraints and a high level of technical competency.

Some of the tasks include:

• Conduct the scheduled daily, monthly and annual periodic checks on all aircraft equipment in order to ensure that all equipment is working properly and prevent any issues or concerns.

• Operates aircraft equipment or tooling relating to work area in order to accomplish the maintenance tasks and to maintain serviceability.

• Address and resolve maintenance tasks escalated by the Assistant Mechanic following established protocols set by the maintenance manuals and Part 145 A/C Equipment Workshop Procedures.

• Examines and inspects equipment components for cracks, breaks or leaks and repairs accordingly.

• Report and escalate major repair work needed to be done to the Shift Leader following established protocols set by the maintenance manuals and Part 145 Aircraft Equipment Workshop Procedures.

• Assembles and installs electrical, plumbing mechanical, hydraulic, pneumatic and structural components and accessories using hand tools and power tools.

• Reads and interprets equipment maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.

• Implement technical solutions for various technical problems related to technical base or line maintenance.

• Perform routine maintenance on aircraft equipment and determining when and what kind of maintenance is needed to address issues with efficiency.

• Ensure that maintenance tasks comply with the technical instructions to carry out maintenance on ground equipment and sign off that work completed is in accordance with the CMM or stated instructions

Be part of an extraordinary story

Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You'll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community.

Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what's never been done before.

Together, everything is possible.

Qualifications - External

About You

Dynamic and competent candidate to join the Technical GSE Department must possess the following:

• High School Qualification/Diploma in Aircraft Maintenance or Trade or vocational aircraft maintenance qualification or Degree (B.Eng., BSc) or equivalent in aircraft engineering

• Minimum 3+ years of job-related/Aircraft Maintenance experience (including apprenticeship)

• Trade or Vocational Qualification in Aircraft Maintenance OR Equivalent Aeronautical Degree

• Candidates with experience on maintenance & operation of wide body Aircraft maintenance docking system is an added advantage.

Job Specific Skills:

• English language and communication skills

• Good knowledge of Part 145 aircraft equipment Maintenance.

• Ability to perform most tasks and duties independently typical to area of specialty.

• Repairing aircraft equipment, mechanical, hydraulic, pneumatic and electrical systems.

• Determining the kind of tools and equipment needed to do a job.

• Controlling operations of equipment or systems.

• Good knowledge of TRAX ERP w.r.t GSE inventory and must able complete the documentation after each task.

• Understanding categories of equipment.

• Ability to read and understand technical documents w.r.t GSE required to carry out various equipment maintenance tasks

• Driving License is preferred

About Qatar Airways Group

Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We've grown fast, broken records and set trends that others follow. We don't slow down by the fear of failure. Instead, we dare to achieve what's never been done before.

So, whether you're creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

How to apply

If you're ready to join a progressive team and have a challenging and rewarding career, then apply now by uploading your CV and completing our quick application form.

Job title

Aircraft Mechanic - Cabin

Ref #

Location

Qatar - Doha

Job family

Not Specified

• Closing date: 13-Oct-2025

As an Aircraft Mechanic in Cabin – Line, you will be responsible and shall perform all work in accordance with approved technical data, QR standards and procedures to the highest standard, best practice and safety to meet the operational requirements as set by the department. Responsible for the completion of any assigned tasks within the frame work of procedures by performing effectively, efficiently and safely within an environment of time constraints with a high level of technical competency. Responsible for rectifying cabin defects to maintain 5 stars standard of all our QTR fleet following Cabin standard manual.

Operational Accountabilities;

• Adheres to Qatar Airways TPM (Technical Procedure Manuals) and company documents for all maintenance tasks assigned, handling of materials & tools and any other maintenance related tasks. Follows Aircraft maintenance documents for all technical work on Qatar Airways Aircraft at all time, to maintain 5 stars standard of Cabin on all Qatar Airways fleet.
• Accomplishes maintenance, troubleshooting, defect rectification and/or repair of Cockpit seats, Cockpit furnishing, lining and panels, and Cabin crew seat.
• Accomplishes maintenance, troubleshooting, defect rectification and/or repair of First Class, Business Class and Economy Class seats.
• Ensures maintenance, troubleshooting, defect rectification and/or repair of Lavatory, Lavatory equipment. Responsible for maintenance, troubleshooting, defect rectification and/or repair of Galley, Galley equipment and/or Galley inserts.
• Accomplish maintenance, preparation, defect rectification and/or repair of Carpet
• Performs maintenance, preparation, defect rectification and/or repair of Vinyl
• Performs Cabin maintenance and its related defect effectively and any other Cabin tasks as directed by Cabin Lead Mechanic / Cabin Licensed Engineer and/or Cabin Licensed Technician.
• Liaises with Cabin team members to complete assigned complex tasks within set timeframes, not to affect the Aircraft Maintenance TAT (Turn Around Time).
• Supports Line maintenance and/or Heavy maintenance teams once instructed by the Cabin supervisor to accomplish Cabin maintenance tasks on time.
• Adhere to all pertinent safety precautions by following proper approved documents related to a particular Aircraft.
• Ensure that replacement of arts and components are of an a roved t e, related to articular Aircraft.

Be part of an extraordinary story

Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You'll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge.

Join us as we dare to achieve what's never been done before.

• High School Qualification / Vocational Qualification /Diploma or Equivalent (Type of Diploma Based on Role) with Minimum 3 years of job-related experience OR
• Bachelor's Degree or Equivalent with Minimum 2 years of job-related experience
• Minimum 05 Years of Certifying Experience.
• Degree or Equivalent Diploma/License in Aircraft Maintenance.
• Basic ICAO type license.
• Engineering Diploma in Aviation
• Repairing machines or systems using the correct tooling.
• Determining the kind of tools and equipment needed to the job.
• Controlling operations of equipment or systems.
• Ability to read and interpret technical documentation related to aircraft maintenance.
• Knowledge of cabin interiors fundamentals and relative skills to his area of employment.

About Qatar Airways Group

Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We've grown fast, broken records and set trends that others follow. We don't slow down by the fear of failure. Instead, we dare to achieve what's never been done before. So, whether you're creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination.

About Qatar Airways Group

Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We've grown fast, broken records and set trends that others follow. We don't slow down by the fear of failure. Instead, we dare to achieve what's never been done before.

So whether you're creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

You will be responsible to ensure that all scheduled and non-scheduled Aircraft equipment maintenance tasks are carried out under the supervision of the GSE Shift Leader to the highest possible standard. All maintenance (periodic and corrective) should be performed as per manufacturer maintenance manuals and Part 145 A/C equipment workshop procedures, in the most productive and cost-effective manner using the available resources. Responsible for all required work in accordance with approved technical data and QR standards and procedures to the highest shop practices and in the interest of safety of aircraft equipment. Responsible for the completion of any assigned tasks within the frame work of procedures and set time frames by performing effectively with an environment of time constraints and a high level of technical competency.

• Conduct the scheduled daily, monthly and annual periodic checks on all aircraft equipment in order to ensure that all equipment is working properly and prevent any issues or concerns.
• Operates aircraft equipment or tooling relating to work area in order to accomplish the maintenance tasks and to maintain serviceability.
• Address and resolve maintenance tasks escalated by the Assistant Mechanic following established protocols set by the maintenance manuals and Part 145 A/C Equipment Workshop Procedures.
• Examines and inspects equipment components for cracks, breaks or leaks and repairs accordingly.
• Report and escalate major repair work needed to be done to the Shift Leader following established protocols set by the maintenance manuals and Part 145 Aircraft Equipment Workshop Procedures.
• Assembles and installs electrical, plumbing mechanical, hydraulic, pneumatic and structural components and accessories using hand tools and power tools.
• Reads and interprets equipment maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
• Implement technical solutions for various technical problems related to technical base or line maintenance.
• Perform routine maintenance on aircraft equipment and determining when and what kind of maintenance is needed to address issues with efficiency.
• Ensure that maintenance tasks comply with the technical instructions to carry out maintenance on ground equipment and sign off that work completed is in accordance with the CMM or stated instructions

Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You'll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community.

Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what's never been done before.

Together, everything is possible.

Dynamic and competent candidate to join the Technical GSE Department must possess the following:

• High School Qualification/Diploma in Aircraft Maintenance or Trade or vocational aircraft maintenance qualification or Degree (B.Eng., BSc) or equivalent in aircraft engineering
• Minimum 3+ years of job-related/Aircraft Maintenance experience (including apprenticeship)
• Trade or Vocational Qualification in Aircraft Maintenance OR Equivalent Aeronautical Degree
• Candidates with experience on maintenance & operation of wide body Aircraft maintenance docking system is an added advantage.

• English language and communication skills
• Good knowledge of Part 145 aircraft equipment Maintenance.
• Ability to perform most tasks and duties independently typical to area of specialty.
• Repairing aircraft equipment, mechanical, hydraulic, pneumatic and electrical systems.
• Determining the kind of tools and equipment needed to do a job.
• Controlling operations of equipment or systems.
• Good knowledge of TRAX ERP w.r.t GSE inventory and must able complete the documentation after each task.
• Understanding categories of equipment.
• Ability to read and understand technical documents w.r.t GSE required to carry out various equipment maintenance tasks
• Driving License is preferred

About Qatar Airways Group Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We've grown fast, broken records and set trends that others follow. We don't slow down by the fear of failure. Instead, we dare to achieve what's never been done before.

So, whether you're creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

How To Apply

If you're ready to join a progressive team and have a challenging and rewarding career, then apply now by uploading your CV and completing our quick application form.

Overview

Aircraft Mechanic - Cabin (Line) responsible for performing work in accordance with approved technical data, QR standards and procedures to meet operational requirements, safely and efficiently within time constraints with a high level of technical competency. Responsible for rectifying cabin defects to maintain 5-star standard of all Qatar Airways Fleet following Cabin Standard Manual.

• Adhere to Qatar Airways Technical Procedure Manuals (TPM) and company documents for all maintenance tasks, handling of materials & tools, and other maintenance-related tasks. Follow Aircraft maintenance documents to maintain 5-star standard of Cabin on all Qatar Airways fleet.
• Carry out maintenance, troubleshooting, defect rectification and/or repair of Cockpit seats, Cockpit furnishing, lining and panels, and Cabin crew seats.
• Carry out maintenance, troubleshooting, defect rectification and/or repair of First Class, Business Class and Economy Class seats.
• Maintain, troubleshoot, rectify and/or repair Lavatory and Lavatory equipment; maintain, troubleshoot, rectify and/or repair Galley, Galley equipment and/or Galley inserts.
• Carry out maintenance, preparation, defect rectification and/or repair of Carpet.
• Carry out maintenance, preparation, defect rectification and/or repair of Vinyl.
• Perform Cabin maintenance and related defect rectification and other Cabin tasks as directed by the Cabin Lead Mechanic / Cabin Licensed Engineer and/or Cabin Licensed Technician.
• Coordinate with Cabin team members to complete complex tasks within set timeframes without affecting Aircraft Maintenance Turnaround Time (TAT).
• Support Line maintenance and/or Heavy maintenance teams as instructed by the Cabin supervisor to complete Cabin maintenance tasks on time.
• Adhere to all pertinent safety precautions by following approved documents related to a particular aircraft.
• Ensure replacement parts and components are of approved type, related to the aircraft.
• Closing date for applications: 13-Oct-2025.

• High School Qualification / Vocational Qualification / Diploma or Equivalent (type of diploma based on role) with minimum 3 years of job-related experience OR
• Bachelor’s Degree or Equivalent with minimum 2 years of job-related experience
• Minimum 5 years of certifying experience
• Degree or Equivalent Diploma/License in Aircraft Maintenance
• Basic ICAO type license
• Engineering Diploma in Aviation
• Repairing machines or systems using the correct tooling
• Determining the kind of tools and equipment needed for the job
• Controlling operations of equipment or systems
• Ability to read and interpret technical documentation related to aircraft maintenance
• Knowledge of cabin interiors fundamentals and related skills in the area of employment

Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. So, whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

Overview

Manager Aircraft Interior role at Qatar Airways .

Location: Qatar - Doha. Ref #: . Job family: Corporate & Commercial. Closing date: 30‑Nov‑2025.

Join our Product Development and Design Team that shapes the creative vision and product strategy, leveraging cross‑industry trends to deliver high‑quality interior concepts across in‑flight experiences and cabin layouts.

About the Role

In this role, you will be responsible for managing and supporting the team that shapes the creative vision and product strategy, ensuring compliance with QA standards and project requirements. You will develop and manage a portfolio of products and services to execute the Qatar Airways vision into tangible hard product design concepts across in‑flight interiors, including layout, galleys, lavatories, seating, storage, etc., for service and new fleet programs.

Your responsibilities include, but are not limited to, the following:

• Manage all customer facing cabin interiors products and onboard features for new and existing aircraft, including updates to current onboard interiors products.
• Support the development and implementation of interior product plans across all aircraft programs to enhance passenger comfort, aesthetics and brand identity.
• Assist in defining interior features, branding, lighting and specifications meeting high quality and comfort standards.
• Use insights from top automotive and consumer brands to maintain leadership in cabin design.

• Work closely with external industrial design studios to conceptualize and evolve future cabin design languages.
• Collaborate with Product Development, R&D teams from seating, lighting, interiors and materials suppliers within aviation and those with automotive or high‑end consumer experience.
• Translate design briefs into visual experiences, concept directions, and compelling narratives for stakeholder alignment.
• Manage various aircraft projects to ensure timelines are not compromised, ensuring representation from Product Development.
• Attend and participate in all aircraft interior program milestone meetings with OEMs, covering kickoff, ITCMs, final product inspection/FAI or cabin walk.
• Represent the Product Development & Design department as the ‘voice of the customer’ to ensure interior design meets customer expectations and brand image.
• Collaborate with internal stakeholders to prepare signature design features for Qatar Airways aircraft interiors based on QR brand, market trends, creativity and innovation.
• Review, plan and support interiors development projects in coordination with Technical Aircraft Programs and other departments.
• Plan and implement cabin designs including floor plans, seating arrangements, color schemes, space planning, and coordinate galley, lavatory and seating development with stakeholders.
• Provide updates on space usage, inspection reports and surveys related to layouts and CMF; prepare detailed project schedules and ensure material choices meet budgetary requirements.
• Advise the Line Manager on progress, deliver project overviews with presentations and reference samples to aid decision making.
• Maintain a library of materials, fabrics, images, drawings, presentations and samples across aircraft programs; ensure timely communication to Senior Management and archiving for future needs.
• Manage research and sampling of materials such as fabrics, flooring and wall finishes to support design aesthetics.
• Design professional product specifications and provide samples/layers for Line Manager review.
• Translate customer briefs into compelling visual product designs and iterate as required.

Be part of an extraordinary story

Our skills, imagination and ambition have no boundaries. You will have opportunities to grow and work on rewarding challenges, shaping the future of airline experiences.

Qualifications

About you

• Bachelor’s degree or equivalent with minimum 8 years of related experience
• Experience in product development, aircraft interiors, and Project Management, preferably within automotive, airline, or high‑end consumer electronics industries
• Experience in multinational creative environments in product innovation, R&D, and design studios
• Ability to review and benchmark competitor airlines to maintain standards
• Results driven with excellent time and project management skills
• Team leadership and people development capability
• Creative thinking with cost‑sav­ing suggestions
• Ability to make swift decisions to aid timelines
• Strong interpersonal, oral and written communication skills
• Managerial ability to set direction, manage workflow, mentor and coach; foster teamwork

Our story started with four aircraft. Today, we deliver excellence across 12 businesses, coming together as one. We aim high, embrace failure as a learning step, and strive for what’s never been done before. Every person contributes to our global community and our proud story of growth and determination.

If you’re ready to join a progressive team and have a challenging and rewarding career, apply now by uploading your CV and completing our quick application form. Please use the link below to apply:

Apply for Manager Aircraft Interior

Seniority level: Mid‑Senior level

Employment type: Full‑time

Job function: Other

Industries: Airlines and Aviation

In this role, you will be responsible for managing and supporting a team that shapes the creative vision and product strategy, leveraging cross-industry trends from automotive, consumer electronics, and hospitality. You will oversee the development and management of a portfolio of products and services, ensuring they are translated into tangible, implementable design concepts across aircraft interiors including layouts, galleys, lavatories, seating, and storage.

• Manage all customer-facing cabin interiors products and onboard features for both new and existing aircraft, including updates to current interiors.
• Support the development and implementation of an interior product plan across aircraft programmes to enhance passenger comfort, aesthetics, and brand identity.
• Define interior features, branding, lighting, and specifications that meet the highest quality and comfort standards.
• Apply insights from leading automotive and consumer brands to maintain leadership in cabin design.
• Partner with external industrial design studios to conceptualise and evolve future cabin design languages.
• Collaborate with Product Development and R&D teams from seating, lighting, interiors, and materials suppliers across aviation and related industries.
• Translate design briefs into visual experiences, concept directions, and compelling narratives for stakeholder alignment.
• Manage aircraft interior projects to ensure timelines and deliverables are achieved without compromise.
• Work with internal stakeholders to deliver signature design features that reflect brand identity, creativity, and innovation, achieving a world-class standard.
• Plan and implement cabin designs including floor plans, seating arrangements, colour schemes, and space planning. Coordinate the development of galleys, lavatories, and seating to ensure operational and customer needs are met.
• Maintain and manage a library of materials, fabrics, images, drawings, presentations, and samples for each aircraft programme, ensuring timely communication to senior management and archiving for future use.
• Oversee research and sampling of materials such as fabrics, flooring, wall finishes, and textures.
• Interpret customer needs from creative briefs and translate them into compelling visual product designs.

• Bachelor’s degree or equivalent, with a minimum of 8 years’ relevant experience, ideally within the automotive, airline, or high-end consumer electronics industries.
• Background in multinational creative environments, particularly within product innovation, R&D, or design studios.
• Results-driven with excellent time management and project delivery skills.
• Strong team leadership and people development capabilities.
• Innovative thinker with the ability to provide valuable cost-saving ideas and recommendations.
• Confident decision-maker, able to support and maintain project timelines.
• Excellent interpersonal, oral presentation, and written communication skills.