202 Electrical Work jobs in Qatar

Hiring: Electrical Maintenance Technician

Responsibilities:

• Perform routine and preventive maintenance on electrical systems and equipment.
• Diagnose and repair electrical faults to minimize downtime.
• Ensure compliance with safety standards and company procedures.
• Maintain accurate records of maintenance activities.
• Collaborate with other departments for smooth operations.

Role-Specific Requirements:

• Must have a good knowledge in electrical, BMS for MEP Systems (i.e. Small Power Systems, ELV, etc.)
• Can troubleshoot related to Small Power Systems and MEP systems
• Minimum 2 years of experience in electrical maintenance.
• Strong knowledge of electrical panels, wiring, motors, and control systems.
• Ability to read and interpret electrical diagrams and manuals.
• Hands-on experience with troubleshooting and repair.

What We Offer:

• Competitive salary and benefits.
• Professional growth and training opportunities.
• Supportive work environment.

Job Types: Full-time, Permanent

Position - Electrical Maintenance Supervisor

Minimum Requirements:

• Diploma /Degree in Electrical Engineering
• Minimum 3 Years GCC experience in maintenance
• 1- 2 Years Hospital Facility Maintenance experience is must
• Immediately available to join candidate is preferred

Job Types: Full-time, Permanent

Location

Al- Wakrah, Qatar

Experience

Job Type

Recruitment

Job Description

Roles and Responsibilities:

• Maintain a clean, and safe work area, adhere to best practice safety procedures.
• Maintain positive customer relations through professional interactions with customers.
• Responsible for the safe maintenance and repair of a variety of Aerial Work Platforms and associated equipment, which utilise mechanical, diesel, electrical and electronic systems.
• Installs and repairs mechanical, hydraulic or electrical parts such as hydraulic cylinders, engine parts, switches, controllers and associated components.
• Dismantles devices to gain access to and remove defective parts
• Examines form and texture of parts to detect imperfections
• Lubricates and cleans parts
• Starts / operates devices to test their performance
• Sets up and operates repair equipment and repair parts according to instruction & procedure
• Diagnose, and carry out preventive maintenance according to manufactures, and Manlift requirements, as well as fault finding, troubleshooting, and attending breakdowns on all equipment in rental and sales fleet.
• Reads, follows, understands oral and written instructions.
• Issue "Field Service reports" and "service work orders" on maintenance tasks and faults, and the parts, labour and time taken to complete the task.
• Maintain service vehicle in a clean & professional manner
• Operates equipment, demonstrate and familiarise customers when necessary.
• Inspects used parts to determine imperfections or changes in dimensional requirements
• Adjusts functional parts of devices and control instruments & repairs or replaces defective parts & components
• Installs special functional and structural parts in devices & equipment.
• Calibrate equipment using electronic aids and procedures and programmable controllers.
• Troubleshoot and Inspect machine (mechanical, electrical and hydraulic components) to detect faults and malfunctions.
• Perform a variety of specialized maintenance and repair work assigned such as –major overhauls of engine, hydraulic pumps & cylinders, rotary coupling, swing drive, torque hub and other mechanical components.
• Perform first check and final inspection of machines in accordance with TMW guidelines.
• Repair electrical components such as starter motors, alternators, and various controllers used on the AWP's.
• Test and perform pressure setting procedures of function pump, control valves, charge & pressure valves, Engine valve lash adjustment.
• Use basic testing and measuring instruments such as JLG and Ezcal analyzer, multi meter, battery tester, and mechanical testing/adjusting tools to Test, analyze, calibrate and adjust equipment parameters.
• Read and interpret basic hydraulic & electrical schematic and troubleshoot faults on various AWP's.
• Work individually and will lead a team in major repair and maintenance.
• Flexible in responding to changes in schedules and scope of job required on all Manlift equipments.
• Travel extensively as workload and schedule demands change, and respond to 24 hours emergency calls in an efficient and timely manner to effect immediate repairs.

Education:

• HIgh school / Diploma /bachelors in electrical , mechanical or hydraulic engineering, / ITI

Skills:

• Ability to install electrical components, cable, PCB's and on board computer on various machines.
• Knowledge to read & understand schematics
• Proactive to learn new equipment systems and procedures of Manlift Fleet
• Knowledge of electrical components and its functions
• Use appropriate tools
• Testing and calibration of machines based on manufacturer specifications and settings
• Able to accept challenges, that need to be resolved .The challenges can range from figuring out/troubleshoot/restore the machine operating function in totality.

Pls note: Looking for candidates with valid QID

Location

Doha, Qatar

Experience

Job Type

Recruitment

Job Description

Job Title: Testing & Maintenance Engineer – Electrical (Onshore)

Location: Qatar

Industry: Oil & Gas

Experience: 8 to 10 years in Oil and Gas industry

About the Role

We are seeking an experienced Testing & Maintenance Engineer (Electrical) to join our onshore operations team. The ideal candidate will have strong technical expertise in electrical installation, maintenance, and testing of transformers, switchboards, and other electrical systems within petrochemical, refinery, and oil & gas environments.

Key Responsibilities

• Perform testing, installation, and maintenance of electrical systems including Transformers, MV/LV Switchboards, A/C, UPS, and DC UPS.
• Supervise cable tray installation, LV/MV/HV cable laying & termination, and grounding systems (underground & above ground).
• Conduct onshore technical work such as relay/breaker testing, equipment function testing, and material inspection at workshops or designated company locations.
• Review and interpret electrical drawings, schematics, datasheets, specifications, and test reports.
• Ensure compliance with international electrical standards and company quality procedures.
• Carry out testing of relays/control panels, microprocessor & solid-state relays through primary and secondary injection testing.
• Perform studies and setting calculations for Siemens, GE, and ABB protection relays.
• Conduct transformer testing (SFRA, Tan Delta, Vector Group, etc.) and CT/VT testing using OMICRON and other advanced test instruments.
• Execute high-voltage testing of MV/HV cables, pre-commissioning, commissioning, and energization tests.
• Develop maintenance strategies for offshore electrical systems and support maintenance activities.
• Verify MTOs as per project drawings and prepare technical documentation, work packs, and progress reports.
• Support project management functions including planning, coordination, and progress monitoring.

Required Qualifications & Experience

• Education: Bachelor's Degree (or equivalent) in Electrical Engineering.
• Experience: Minimum 8–10 years in testing, maintenance, and installation of electrical systems in petrochemical/refinery/oil & gas industries.
• Hands-on experience with test equipment such as CMC-256, Freja 549, CPC-100, Power Analyzer, IR Tester, VIDAR, PD Tan Delta, VLF & HV Hipot Kits.
• Proficient in project documentation, quality assurance, and electrical standards compliance.
• Excellent command of English (verbal & written).
• Physically fit and willing to work offshore if required.

Preferred Qualifications

• COMPEX Certification and/or UPDA Grade-A certification.

1. Review capital spares status and provides recommendations for preservation and storage
2. Review and recommends min / max spare parts level for non-moving, obsolete, surplus, spares and consolidate and updates the files on a continuous basis to ensure optimum quantity in warehouse and minimise financial exposure.
3. Review Recommended Spare Parts lists (RSPL) and recommend spare parts for all new projects. Review stock that has passed shelf life and recommend to replenish or scrap as necessary.
4. Support the Technical Bid Evaluation (TBE) and review the offer provided by Buyer/Supply department for the spares of electrical equipment.
5. Review all Interface agreements between new projects and existing operations related to Electrical Discipline from maintenance perspective.
6. Support the engineering feasibility study (eMOC – management of change) in coordination with required disciplines and develop mitigation solution for Obsolescence Management to upgrade obsolete electrical equipment & its components.
7. Perform Obsolescence Management activities for equipment and Spares to ensure business continuity and minimize operation risks
8. Review of all electrical Master Data Governance (MDG) studies (Material creation, change, deletion and obsolete) through SAP.
9. Develop and review policies and procedures relevant to Obsolescence & Life cycle Management.
10. Liaise effectively with relevant stakeholders as required.

• 4 years’ experience in an oil and gas or petrochemical industry related to Electrical Engineering.
• Maintenance experience and knowledge on Electrical Equipment such as Transformers, Motors, Generators, Switchgear, Protection Relays, ELICS, UPS, Battery Chargers, VFDs, etc

• Fluent in English language (demonstrated verbal and written skills).
• Computer literate and knowledgeable in relevant software tools and specifications.

Electrician Job Description:

We would like to hire an electrician to join our team. You will be responsible for installing and repairing complex electrical control, wiring, and lighting systems working from a technical blueprint. To perform in this role you need an electrician degree from a technical college and experience in the field working on simple and complex electrical systems.

Electrician Responsibilities:

• Installing, maintaining, and repairing electrical control, wiring, and lighting systems.
• Reading technical diagrams and blueprints.
• Performing general electrical maintenance.
• Inspecting transformers, circuit breakers, and other electrical components.
• Troubleshooting electrical issues using appropriate testing devices.
• Repairing and replacing equipment, electrical wiring, and fixtures.
• Following National Electrical Code state and local building regulations.
• Performing circuit breaker corrective maintenance.
• Maintaining good knowledge of heating and air conditioning systems as well as various testing equipment.

Electrician Requirements:

• Experience working as an electrician.
• Deep electrical system, power generation, blueprints, maintenance, and repair knowledge.

WhatsApp:

Job Types: Full-time, Permanent, Contract

Contract length: 24 months

Experience:

• Electrical Technician: 2 year (Required)

Job Type: Full-time

Pay: QAR1, QAR3,000.00 per month

Experience:

• MEP: 1 year (Preferred)

• Have Knowledge of distribution transformers, circuit breakers, ring main units, feeder pillars HV & LV underground cables and overhead lines.
• Have Knowledge in Internal Wiring
• Basic knowledge of relays, fault indicators, electricity meters, ACBs, MCCBs, consumers installations etc.
• Should have worked for minimum 5years in any Electricity Power Sector with 2 Years in GCC.
• share the cv to

Job Type: Full-time

Pay: QAR2, QAR3,000.00 per month

• Must have experience in Building Maintenance

• Immediate joiners with Valid QID

Location: Musherib Downtown

Duration: 2 Months (Outsourcing)

Job Type: Temporary

Contract length: 2 months