118 Environmental Safety jobs in Qatar

Doha, Qatar

Short summary of the job: The position is responsible for implementation of best international practices of Health and Safety both in design and construction stages of the Project on the principle to achieve ‘Zero Harm’. This position is also responsible for correct identification and recording of incidents and accidents on construction projects and implementation of lessons learned for continual improvement. Draft or review any HSE related documents as required Attendance at relevant meetings. Review and ensure that HSE principles are incorporated and applied Provide progress reports as and when require Identify, develop and promote Programme and project required HSE polices

**Skills and Competencies**:

- Minimum of 10 years’ experience in major infrastructure projects or programmes; preference will be given to roads, aviation, structures or ra il related experience
- Knowledge of HSE system standards, such as ISO, OHSAS, or similar
- Experienced in the collection of accident and incident data on construction projects, the calculation of performance measures, and preparation of reports for senior management
- Demonstrated performance of improving HSE outcomes for organizations involved in construction of large-scale infrastructure
- Experience in implementing safety systems at the construction phase of projects
- Knowledge of issues affecting the health and safety of construction workers in the Gulf region, and ameliorative measures to address them
- Knowledge of environmental impacts related to construction in the Gulf region, and ameliorative measures to address them
- Knowledge of cultural issues that may impact on the ability of a diverse workforce in complying with HSE systems, and ameliorative measures to address them
- Desirable to have experience of working in Qatar or the Gulf region
- Demonstrable track record in the delivery of large multidisciplinary pro jects In-depth knowledge of project controls procedures.
- Effective in building good working relationships within complex structures,
- both internally and with various project stakeholders

**Main Responsibilities**:

- Preparation and implementation of HSE plans, policies and procedures
- To review and approve the Contractor’s and Supervision Consultant’s HSE staff, plans and procedures
- Carry out audits for ISO 9001, 14001 and OHSAS 18001 and recommend the necessary corrective actions and measures
- Advise, guide and support managers in the implementation of Health & Safety practices both on site and within the office environment
- Ensure that appropriate Health and Safety training is delivered
- To work with the supervision consultants and contractors to ensure they are continually improving their QHSE approach and systems on projects to reduce accidents
- To work with other departments within Ashghal and the government in identifying and sharing best practice
- To establish and implement appropriate HSE measures that robustly collect accurate data on performance, and have targets and benchmarks where appropriate

SAFETY ENGINEER - PWA
- To foster a culture of continual improvement in the department and across the supply chain
- To identify, develop, and improve procedures and systems for the section, department, and Ashghal
- Undertake audits of the performance of the contractors on HSE and to collaborate with all relevant parties in improving safety
- Ensure compliance with health and safety legislation
- Analyze accidents and identify trends, vulnerabilities and liabilities that can be avoided by preventive techniques and procedures
- Advise, guide and support managers in the implementation of Health & Safety practices both on site and within the office environment; working closely with stakeholders to ensure that Health & Safety procedures and policies are being applied on a Programme and Project level
- Undertake the role of lead contact to senior management for advice and recommendations regarding Safety related issues
- Provide technical support and advice to the Head of Engineering Support and act independently as may be required under certain circumstances
- Work proactively with the Design/Supervising Consultants to resolve any problems related to Safety
- Coordinate with the Design Department to develop and implement improvements to the methods concerning Road Safety Audit to obtain the highest engineering value whenever possible
- Act as an internal facilitator within the department to identify concerns, areas for improvement, and then act to streamline processes this intelligence to improve systems and tools
- Liaise effectively with the Design/Supervising Consultants/Contractors on all Safety matters.
- Continually seek and capture lessons learned from the process and use
- this intelligence to improve systems and tools
- Monitor policies and procedures and report any areas where improvement
- is required
- Ensure Programme and Project wide compliance with Health & Safety
- Legislation.
- Safety rela

Must have Hamad International Airport experience minimum 2-3 years
- Experience certificate is required.
- Should have NEBOSH IGC certificate
- Local hire only - Qatar
- Can join immediately

Note:
**Salary**: QAR6,000.00 per month

Ability to commute/relocate:

- Doha: Reliably commute or planning to relocate before starting work (required)

Job Description - Senior Safety Engineer (DOH01JX)

Company: Worley

Primary Location: Location details not specified

Position Details

• Job Title: Senior Safety Engineer
• Department: Safety and Risk
• Schedule: Full-time
• Employment Type: Employee
• Job Level: Experienced

Job Posting Details

• Posting Date: May 14, 2025
• Unposting Date: Ongoing

Company Overview

Worley is a global professional services company specializing in energy, chemicals, and resources. We partner with clients to deliver projects and create value throughout the asset lifecycle, focusing on sustainable energy sources and current energy needs.

Primary Responsibilities

• Ensure compliance with engineering standards, regulatory requirements, and client specifications.
• Standardize equipment specifications, drawings, and document templates.
• Contribute to technical knowledge sharing, legal compliance, and customer requirements.
• Utilize local and global standards to support technical excellence.
• Participate in review processes, including checking and peer reviews.
• Adopt recognized onshore and offshore safety and risk engineering practices.
• Develop safety and risk design studies and scope of work, optimizing project cost and schedule.
• Gather and compile safety and environmental data.
• Assist in executing hazard studies such as HAZID, ENVID, HAZOP, and LOPA, as well as other safety reviews.

Job Specific Knowledge

• Active commitment to HSE management in projects.
• Intermediate understanding of relevant regulations, codes, and standards.
• Knowledge of onshore and offshore safety and risk engineering practices for oil and gas/refinery/petrochemical facilities.
• Experience in developing safety and risk engineering deliverables, including HSE plans, fire protection systems, and hazard classifications.
• Moderate knowledge of safety and risk studies like QRA and FERA.

Industry Experience

• Experience in brownfield safety and risk design in oil and gas projects.
• Experience working on multi-disciplinary projects, preferably in the Middle East.

Qualifications

• Full-time Bachelor's Degree in Chemical Engineering from an accredited university.
• Mandatory MME accreditation; willingness to obtain if not already held.
• Chartered Professional Engineer (CPEng) status or equivalent is advantageous.

Additional Information

We are committed to diversity, inclusion, and equal opportunity employment. We support workforce reskilling and transition to low-carbon energy technologies, fostering a culture of belonging, innovation, and sustainable impact.

• Conduct daily site inspections to identify unsafe acts/conditions and ensure timely corrective actions.
  
• Monitor and enforce compliance with company HSE policies, local regulations, and international standards (e.g., OSHA, ISO 45001, API, etc.).
  
• Prepare and maintain HSE documentation such as risk assessments, JSAs, work permits, incident reports, and safety audits.
  
• Deliver induction and regular safety training to employees, contractors, and visitors.
  
• Participate in HSE meetings and toolbox talks; lead where necessary.
  
• Investigate incidents, near misses, and unsafe conditions; develop root cause analysis and recommend corrective measures.
  
• Ensure that emergency response plans are current, communicated, and tested regularly.
  
• Supervise critical operations such as hot work, confined space entry, lifting operations, and working at heights.
  
• Interface with client HSE representatives and regulatory authorities.
  
• Monitor environmental compliance, including waste management, emissions, and spill response.

Preferred candidate profile

Experience :

• 5 years of HSE experience in oil & gas industry (onshore/offshore).
• Strong knowledge of local and international HSE regulations and practices.
• NEBOSH IGC 3 (required or equivalent)

Skills :

• Excellent communication and reporting skills
  
• Strong observation and analytical abilities
  
• Team player with leadership qualities
  
• Proficient in MS Office and incident reporting tools

Company Industry

• Recruitment
• Placement Firm
• Executive Search

Department / Functional Area

Keywords

Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at

People Looking for Safety Engineer Officer Jobs also searched #J-18808-Ljbffr

Job Description - Principal Safety Engineer (DOH01JY)

Principal Safety Engineer - DOH01JY

Company : Worley

Primary Location Job Safety and Risk Schedule Full-time

Employment Type : Employee

Job Level : Experienced

Job Posting Posting Date : May 14, 2025 Unposting Date Unposting Date : Ongoing

Building on our past. Ready for the future

Worley is a global professional services company specializing in energy, chemicals, and resources. We partner with clients to deliver projects and create value throughout the lifecycle of their assets, focusing on sustainable energy sources and current energy needs.

Specific Accountabilities:

• Support standardization of equipment specifications, drawings, and document templates.
• Contribute to understanding technical knowledge, legal requirements, and customer specifications.
• Use local/global standards to support technical excellence.
• Participate in checking, peer reviews, and incorporation of comments and findings.
• Identify safety engineering scope from the basis of design.
• Design Safety Reviews / Studies, Layout, EERA, ESSA, F&G, Dropped Object, Hazardous Area assessments.
• Ensure technical integrity of Safety & Risk deliverables through review activities.
• Document key safety-related design decisions.
• Perform squad checking of deliverables.
• Update lessons learned register.
• Conduct Safety & Risk Studies, including safety philosophies, safety system design requirements, fire protection design, hazard classification, safety assessments, and more.
• Identify major hazard events and apply hazard management strategies.
• Develop Safety-Critical Elements & Performance Standards.

Quality Assurance:

• Adhere to Quality Assurance systems and guidelines.

Safety:

• Follow personal safety practices and OH&S procedures.
• Promote health, safety, and environmental awareness.

Job Specific Knowledge:

• Demonstrate commitment to HSE management.
• Possess effective technical skills in Safety & Risk discipline.
• Have expertise in safety design, hazard and risk management, safety standards, and safety studies.
• Experience in facilitating HAZOP and HAZID workshops.
• Knowledge of safety management principles and safety case development.

IT Skills:

• Pipenet, PHAST, SAFETI, PHA Pro, optional Detect3D, exSILentia.

Industry-Specific Experience:

• Experience in offshore/onshore oil & gas safety design, hazard studies, SIL facilitation, safety assessments, and plant modifications.

Education - Qualifications, Accreditation, Training:

• Bachelor's Degree in Chemical Engineering.
• MME accreditation or willingness to obtain it.
• Chartered Professional Engineer (CPEng) status or equivalent is advantageous.

Moving forward together

Worley is committed to diversity, inclusion, and equal employment opportunities, fostering a culture of belonging and innovation. We support our workforce's transition to low-carbon energy technologies, offering diverse career paths and growth opportunities.

Building on our past. Ready for the future

Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We're bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.

Specific Accountabilities:

• Supports the standardization of equipment specifications, drawings, and document templates.
• Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful.
• Uses local/global standards to support technical excellence.
• Supports checking, peer reviews, and incorporation of comments and findings.
• Identify the safety engineering scope of work from the basis of design.
• Conduct HAZID & HAZOP workshops.
• Design Safety Reviews / Studies, Layout, EERA, ESSA, F&G, Dropped Object, Hazardous Area.
• Ensure technical integrity of the Safety & Risk discipline's deliverables through the implementation of checking and design review activities.
• Document key design decisions that may have a significant safety impact.
• Squad checking of deliverables
• Updating lessons learned in the lessons learned register.
• Safety & Risk Studies:
  • Preparation of Safety & Risk Philosophies.
  • Design Requirements for Safety Systems.
  • Active Fire Protection Design (PipeNet).
  • Passive Fire Protection Design.
  • Fire and Gas Design.
  • Hazardous area classification.
  • Escape routes and safety equipment specification.
  • Formal Safety Assessments.
• Identify major Accident Hazard events and apply a formalized approach of hazard management to identify and provide means of mitigation and reduction of hazards.
• Safety-Critical Element & Performance Standards.

Quality Assurance:

• Responsible for working within the provisions and guidelines of the Quality Assurance systems.

Safety:

• Responsible for personal safety safe working practices. Understand and follow OH&S procedures
• Promoting health, safety and environmental awareness.

Job Specific Knowledge:

• Demonstrate a visible and active commitment to HSE management and its associated requirements in a project environment
• Highly effective technical and practical engineering skills in the Safety & Risk discipline, and able to consistently deliver quality, accurate and timely work to Worley and its clients.
• Specialized expertise of the fundamental requirements of the Safety & Risk discipline, and the basic requirements of other disciplines.
• Specialized expertise of applicable local and international standards and statutory and regulatory requirements.
• In-depth knowledge of safety design/engineering with wide experience in multi-discipline areas
• Excellent report writing skills.
• Extensive working knowledge in: Hazard and Risk Management, Concept Option Selection, Inherent Safety Review, Fire & Explosion Analysis, Fire Protection related studies, Formal Safety Assessments, Safety Critical Element & Performance Standards, QRA, Safety Case, Reliability Studies (including FMEA and RAM), SIL Assessments, Active Fire Protection Design, Passive Fire Protection Design.
• Experience in facilitation HAZOP and HAZID workshops
• Experience with Reliability/Availability Studies for offshore/onshore Petrochemical Industries
• Exposure to Safety Management principals, application and relevance in Risk Assessments
• Experience with completion of Safety Cases for offshore or onshore facilities
• Expert level knowledge in - Safety & Risk Engineering (Active and Passive Fire protection system design, Fire and Gas detection system design, Hazardous area classification), Safety and Risk Studies (QRA and FERA)

IT Skills:

• Pipenet
• PHAST
• SAFETI
• PHA Pro
• Flaresim
• Detect3D (optional)
• exSILentia (optional)

Industry-Specific Experience:

• Experience of safety design in onshore and offshore oil & gas industry in a brownfield environment is highly desired.
• Experience with HAZID / HAZOP ToR preparation, scribing and report
• HAZID / HAZOP actions follow-up and close-out
• Consequence modelling (e.g. Phast / Safeti / Fred)
• SIL / ALARP Facilitation / SIL verification
• Safety studies, dropped object, lifting risk assessment, platform ship impact, helicopter impact
• F&G assessment and design
• Performs as a professional Safety & Risk engineer for projects and plant modifications from Front End

Education - Qualifications, Accreditation, Training:

• Full-Time Bachelor's Degree in Chemical Engineering from an accredited university
• MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period.
• Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage

Moving forward together

We're committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.

We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.

And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.

Whatever your ambition, there's a path for you here. And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

Principal Safety Engineer-DOH01JY

Primary Location

QAT-DW-Doha

Supports the standardization of equipment specifications, drawings, and document templates. Contributes to the understanding of technical knowledge, legal requirements, and customer specifications whenever viable and lawful. Uses local/global standards to support technical excellence. Supports checking, peer reviews, and incorporation of comments and findings.

Identify the safety engineering scope of work from the basis of design. Conduct HAZID & HAZOP workshops. Design Safety Reviews / Studies, Layout, EERA, ESSA, F&G, Dropped Object, Hazardous Area. Ensure technical integrity of the Safety & Risk discipline's deliverables through the implementation of checking and design review activities. Document key design decisions that may have a significant safety impact. Squad checking of deliverables. Updating lessons learned in the lessons learned register.

Safety & Risk Studies:

• Preparation of Safety & Risk Philosophies.
• Design Requirements for Safety Systems.
• Active Fire Protection Design (PipeNet).
• Passive Fire Protection Design.
• Fire and Gas Design.
• Hazardous area classification.
• Escape routes and safety equipment specification.
• Formal Safety Assessments.

Identify major Accident Hazard events and apply a formalized approach of hazard management to identify and provide means of mitigation and reduction of hazards. Safety-Critical Element & Performance Standards.

Job Specific Knowledge:

Demonstrate a visible and active commitment to HSE management and its associated requirements in a project environment. Highly effective technical and practical engineering skills in the Safety & Risk discipline, and able to consistently deliver quality, accurate and timely work to Worley and its clients. Specialized expertise of the fundamental requirements of the Safety & Risk discipline, and the basic requirements of other disciplines. Specialized expertise of applicable local and international standards and statutory and regulatory requirements. In-depth knowledge of safety design/engineering with wide experience in multi-discipline areas. Excellent report writing skills. Extensive working knowledge in hazard and risk management, concept option selection, inherent safety review, fire & explosion analysis, fire protection studies, formal safety assessments, safety critical element & performance standards, QRA, safety case, reliability studies (including FMEA and RAM), SIL assessments, active and passive fire protection design.

Experience in facilitation of HAZOP and HAZID workshops. Experience with reliability/availability studies for offshore/onshore petrochemical industries. Exposure to safety management principles, application, and relevance in risk assessments. Experience with completion of safety cases for offshore or onshore facilities. Expert level knowledge in safety & risk engineering, safety and risk studies, safety case development, etc.

IT Skills & Industry-Specific Experience:

Experience of safety design in onshore and offshore oil & gas industry in a brownfield environment is highly desired. Experience with HAZID / HAZOP ToR preparation, scribing, report writing, and follow-up actions. Consequence modeling (e.g., Phast / Safeti / Fred). SIL / ALARP facilitation and verification. Safety studies, dropped object, lifting risk assessment, platform ship impact, helicopter impact, F&G assessment, and design. Performs as a professional Safety & Risk engineer for projects and plant modifications from Front End.

Qualifications:

Full-Time Bachelor's Degree in Chemical Engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is mandatory. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same is advantageous.

Moving Forward Together

We're committed to building a diverse, inclusive, and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status, or any other protected basis.

We want our people to be energized and empowered to drive sustainable impact. Our focus is on a values-inspired culture that unlocks brilliance through belonging, connection, and innovation. We are actively reskilling our workforce for low carbon energy infrastructure and technology.

Whatever your ambition, there's a path for you here. Join us to broaden your horizons, explore diverse opportunities, and contribute to sustainable change.

Job Title

Senior Technical Safety Engineer

Location

Qatar

Company

Wood

Responsibilities

• Perform safety study assessments using techniques, spreadsheets, databases, and proprietary software, and generate project deliverables including production, checking, and approval.
• Prepare design deliverables such as philosophies, reports, studies, specifications, data sheets, and drawings, following all operational procedures.
• Coordinate and liaise with other engineering disciplines to incorporate their input into the deliverables.
• Ensure compliance with relevant specifications, national/international regulations, codes, and standards.
• Review and approve vendor documentation related to the discipline.
• Provide technical information to Purchasing and Estimating Departments for obtaining costs and availability of safety equipment and materials.
• Maintain effective interfaces with the project team, client representatives, and third parties.
• Represent the Technical Safety discipline both internally and externally on design issues.
• Provide progress reports and forecasting inputs to the Lead Technical Safety Engineer.
• Follow standard working procedures and ensure compliance with QA/QC systems.

Qualifications

• Degree in an appropriate engineering subject.
• 5-10 years of experience in a similar role.
• Experience in safety engineering within the offshore oil and gas industry.
• Experience working in an office environment and within project teams.
• Participation in project design reviews such as HAZID, ENVID, and HAZOP.
• Proficiency with technical safety software (e.g., DNV Phast & Safeti, Gexcon Shell FRED & Shepherd, Sunrise Pipenet, Schlumberger Flaresim).
• NGL experience is an advantage.

About Us

Wood is a global leader in consulting and engineering, providing solutions in energy and materials markets across 60 countries, employing around 35,000 people. Visit for more information.

Diversity Statement

We are an equal opportunity employer committed to diversity. All qualified applicants will be considered regardless of race, color, age, religion, gender, national origin, disability, sexual orientation, gender identity, veteran status, or other characteristics, in accordance with applicable laws.

Additional Details

• Seniority level: Mid-Senior level
• Employment type: Full-time
• Job functions: Management and Manufacturing
• Industries: Staffing and Recruiting

Join to apply for the Technical Safety Engineer role at Wood

Get AI-powered advice on this job and more exclusive features.

Job Description

Wood has an opportunity for a Senior Technical Safety Engineer to join our team in Qatar.

Responsibilities

1. Use techniques, spreadsheets, databases and proprietary software as necessary to perform safety study assessments and generate project deliverable documents, including production, checking and approval as required.
2. Preparation of design deliverables including philosophies, reports, studies, specifications, data sheets, drawings, etc whilst following all applicable operational procedures.
3. Coordinate and liaise with other engineering disciplines as necessary in the preparation and development of the deliverables, ensuring that other disciplines' input is incorporated.
4. Ensure compliance with relevant specifications as well as applicable national/international regulations, codes and standards.
5. Review and approve vendor documentation as applicable to the discipline.
6. Ensure Purchasing and Estimating Departments have technical information for obtaining costs and availability of Technical Safety equipment and materials.
7. Maintain effective interfaces between the Technical Safety project team and other disciplines' teams, client representatives, and other third parties as required.
8. Represent the Technical Safety discipline internally and externally on design issues involved.
9. Provide progress reporting and forecasting input to the Lead Technical Safety Engineer as required.
10. Follow standard working procedures and ensure compliance with relevant QA/QC systems.

Qualifications

1. Degree in appropriate engineering subject.
2. Minimum 5-10 years of experience in a similar role.
3. Experience of safety engineering in the offshore oil and gas industry.
4. Experience of office working and working within a project team.
5. Participation in project design reviews such as HAZID, ENVID and/or HAZOP.
6. Ability to use Technical Safety software pertinent to design reviews (e.g., DNV Phast & Safeti, Gexcon Shell FRED & Shepherd, Sunrise Pipenet, Schlumberger Flaresim).
7. NGL experience is an additional advantage.

About Us

Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people.

Diversity Statement

We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with relevant laws.

Additional Details

• Seniority level: Mid-Senior level
• Employment type: Full-time
• Job function: Management and Manufacturing
• Industries: Professional Services

Referrals increase your chances of interviewing at Wood by 2x.

Get notified about new Safety Technician jobs in Doha, Qatar .