38 Gas Engineer jobs in Qatar

Overview

Job Summary And Purpose
The Cargo Engineer Officer is responsible to the Chief Engineer Officer for the maintenance of all cargo handling and monitoring equipment and other associated systems. During cargo operations the Cargo Engineer is responsible for providing operational support to the OOW with respect to cargo handling and equipment. He is responsible for carrying out all operations necessary for cargo care and supervision at sea and must provide the Chief Officer with all information necessary for him to exercise his responsibility for the cargo carriage. He is responsible for the safety of all personnel working under his supervision.

Accountabilities

• Maintenance of: Cargo instrumentation including transmitters, receivers, recorders, regulators, actuator, and lines
• Cargo compressors, including loading, discharge, spray valves, lines, and equipment
• Cargo/spray pumps
• Ballast system, including valves, lines, pumps, and control systems
• Gas analyzer maintenance
• Inert gas/dry air plant, where fitted
• Re-liquefaction plant and Gas Combustion Unit (GCU) (where fitted) including nitrogen system, tanks, lines, valves, and all associated equipment
• Carrying out any lawful command and delegated duty as issued by the Chief Engineer and/or Master

Accountabilities – Testing And Records

• Testing of equipment and maintenance of records for:
• Gas detectors and analyzers
• Smoke detectors in compressor house
• ESD system checks prior to arrival at load and discharge ports
• Daily cargo log
• Adjustment of heating coils
• Inner hull inspections and records
• Routine testing at sea and pre-arrival assisted by the Chief Officer

The Chief Engineer Officer may assign the Cargo Engineer Officer to assist with other maintenance and repair duties, particularly on other deck systems and equipment. However, his responsibilities for the cargo systems and equipment should have priority. He is operationally responsible to the Master for all aspects of cargo care and supervision at sea to ensure the safe execution of the planned passage. The Cargo Engineer should be completely conversant with the ship's Manuals, associated Charterer’s Emergency Management Plans, onboard contingency plans, and the Safety Management System. The Cargo Engineer Officer is a member of the Ship Management Team and shall assist the other Engineer Officers in understudying him as an essential part of their training and development.

Competencies

• Budget Control
• Bunkering operations
• Charterers instructions, terminal and state requirements, port documentation
• Cleaning and inspection of WHU and uptake fires
• Communications with other nationalities
• Crankshaft deflections, Alternator air gaps
• Disciplinary procedures & process
• Diversity Awareness
• Emergency procedures
• Experience with cargo transfer operations (STS, Co-mingling, COW, Inert Gas, LNG discharge, emergency operations)
• Experience with multinational crews
• Experience with Products Crude and LNG Cargo planning arrangements
• Hazards associated with cargoes
• HV experience and safety precautions
• IG systems, Deck water seal, Fixed O2 analyzers and calibration
• IMO conventions and requirements
• Testing Quick closing valves/ Fire flaps/ Emergency bilge suction / CO2 / FFA equipment
• Intrinsically Safe/Explosion proof fittings
• IT experience
• LNG pumping systems and HV equipment
• Newbuilds
• Onboard Accounting procedures
• Operation of cargo handling equipment and construction of tanks
• Ordering & Purchase of victuals and stores
• Personal safety, Ship safety & protection of the environment
• Preparations for all surveys
• PSC, SIRE, ISM, ISPS and other industry inspections
• PTW systems, ISM requirements, Risk assessment
• Refit Experience
• Reverse power trips
• Reversing, Cylinder lubrication, Performance measuring
• Routine Maintenance
• Emergency operation. Cylinder Liner oil retention, piston rings and quills
• Safety equipment
• Steam driven cargo pumps, Frame systems
• Steering Gear, Evaporators, Air compressors, Hotel Services and Fridge systems. Purifiers and Clarifiers
• Team building - How to train and guide subordinates
• Testing of boiler trips etc.
• Written and spoken English to high standard

Education

Class 3

Qualifications, Experience And Job Skills

Cargo / Gas Engineer

Department:
City:

Job Segment

HVAC, Boiler Engineer, Construction, Quality Assurance, QA, Operations, Engineering, Technology, Quality

#J-18808-Ljbffr

Overview

Job Summary And Purpose The Cargo Engineer Officer is responsible to the Chief Engineer Officer for the maintenance of all cargo handling and monitoring equipment and other associated systems. During cargo operations the Cargo Engineer is responsible for providing operational support to the OOW with respect to cargo handling and equipment. He is responsible for carrying out all operations necessary for cargo care and supervision at sea and must provide the Chief Officer with all information necessary for him to exercise his responsibility for the cargo carriage. He is responsible for the safety of all personnel working under his supervision.

Accountabilities

Maintenance of: Cargo instrumentation including transmitters, receivers, recorders, regulators, actuator, and lines Cargo compressors, including loading, discharge, spray valves, lines, and equipment Cargo/spray pumps Ballast system, including valves, lines, pumps, and control systems Gas analyzer maintenance Inert gas/dry air plant, where fitted Re-liquefaction plant and Gas Combustion Unit (GCU) (where fitted) including nitrogen system, tanks, lines, valves, and all associated equipment Carrying out any lawful command and delegated duty as issued by the Chief Engineer and/or Master

Accountabilities – Testing And Records

Testing of equipment and maintenance of records for: Gas detectors and analyzers Smoke detectors in compressor house ESD system checks prior to arrival at load and discharge ports Daily cargo log Adjustment of heating coils Inner hull inspections and records Routine testing at sea and pre-arrival assisted by the Chief Officer

The Chief Engineer Officer may assign the Cargo Engineer Officer to assist with other maintenance and repair duties, particularly on other deck systems and equipment. However, his responsibilities for the cargo systems and equipment should have priority. He is operationally responsible to the Master for all aspects of cargo care and supervision at sea to ensure the safe execution of the planned passage. The Cargo Engineer should be completely conversant with the ship's Manuals, associated Charterer’s Emergency Management Plans, onboard contingency plans, and the Safety Management System. The Cargo Engineer Officer is a member of the Ship Management Team and shall assist the other Engineer Officers in understudying him as an essential part of their training and development.

Competencies

Budget Control Bunkering operations Charterers instructions, terminal and state requirements, port documentation Cleaning and inspection of WHU and uptake fires Communications with other nationalities Crankshaft deflections, Alternator air gaps Disciplinary procedures & process Diversity Awareness Emergency procedures Experience with cargo transfer operations (STS, Co-mingling, COW, Inert Gas, LNG discharge, emergency operations) Experience with multinational crews Experience with Products Crude and LNG Cargo planning arrangements Hazards associated with cargoes HV experience and safety precautions IG systems, Deck water seal, Fixed O2 analyzers and calibration IMO conventions and requirements Testing Quick closing valves/ Fire flaps/ Emergency bilge suction / CO2 / FFA equipment Intrinsically Safe/Explosion proof fittings IT experience LNG pumping systems and HV equipment Newbuilds Onboard Accounting procedures Operation of cargo handling equipment and construction of tanks Ordering & Purchase of victuals and stores Personal safety, Ship safety & protection of the environment Preparations for all surveys PSC, SIRE, ISM, ISPS and other industry inspections PTW systems, ISM requirements, Risk assessment Refit Experience Reverse power trips Reversing, Cylinder lubrication, Performance measuring Routine Maintenance Emergency operation. Cylinder Liner oil retention, piston rings and quills Safety equipment Steam driven cargo pumps, Frame systems Steering Gear, Evaporators, Air compressors, Hotel Services and Fridge systems. Purifiers and Clarifiers Team building - How to train and guide subordinates Testing of boiler trips etc. Written and spoken English to high standard

Education

Class 3

Qualifications, Experience And Job Skills

Cargo / Gas Engineer

Department: City:

Job Segment

HVAC, Boiler Engineer, Construction, Quality Assurance, QA, Operations, Engineering, Technology, Quality

#J-18808-Ljbffr

**OIL & GAS JR. ESTIMATION ENGINEER**

**Qualification**
- **5* years' experience in **Oil & Gas Construction & Maintenance* with **3* yrs. as **Jr. Estimation Engineer* in GCC is required
- **Bachelors Degree in Mechanical Engineering **with strong key background knowledge in **Cost Engineering**.

**Salary negotiable**

Pay: From QAR1,000.00 per month

**Experience**:

- Oil & Gas Estimation: 5 years (required)

**Job Summary**:
We are looking for a dedicated **Instrumentation Engineer (Oil & Gas)** to join our team. Responsible for designing, developing, and maintaining instrumentation systems for various industrial processes. They will collaborate with cross-functional teams to ensure the efficient and accurate measurement of parameters such as temperature, pressure, and flow in the oil and gas industry.

**Responsibilities**:

- Assess Instrumentation performance and recommend improvements for system optimization.
- Develop models and design components for automated systems.
- Develop and maintain lifecycle management activities for instrumentation systems.
- Design, install, and troubleshoot instrumentation systems in industrial settings.
- Conducting calibration, testing and maintenance of systems.
- Configuring automated, electrical systems and processes.
- Designing, developing and maintaining control systems.
- Designing and supervising installation, wiring and signal conditioning.
- Creating and maintaining documentation, including technical specifications, drawings, and manuals for instrumentation systems.
- Staying updated with the latest advancements in instrumentation technology and recommending improvements or upgrades to existing systems.
- Conducting regular inspections and maintenance of instrumentation systems to ensure optimal performance and compliance with safety standards.

**Qualifications and Experience**:

- Minimum 8 to 12 years of experience in managing end-end construction activities of ELECTRICAL projects.
- Strong understanding of instrumentation, control systems, complex systems and mathematics.
- Experience with projects related to QATAR ENERGY is mandatory.
- Bachelor's Degree in Instrumentation Engineering or in a related Engineering discipline.
- Excellent communication and interpersonal skills.
- Proven Project Management skills, including the ability to manage the project.
- Experience in using or a desire to learn the required software.
- Extensive knowledge of the modern methods, techniques and materials used in the design.
- Familiar with Industrial/International Codes and Standards.
- UPDA Certified will be an added advantage.
- **#**_**Experience related to **_**Qatar Energy **_**projects is a must.**

**Job Types**: Full-time, Permanent

**Experience**:

- Minimum (Oil & Gas): 8 years (required)

**INSTRUMENT QC ENGINEER / INSPECTOR-OIL & GAS**

**Qualifications**
- locally based in Doha for immediate joining with QID and NOC
- **10** **years** in experience in **Oil & Gas** major EPIC contractor in the field of **Electrical& Instrumentation Control, Quality Engineer/Quality Inspector**
- **Bachelor of Technology in Electrical & Instrumentation Engineering**

**Salary Range of QR plus F.A.T company provided**

Pay: QAR5,500.00 - QAR6,500.00 per month

**Experience**:

- Oil & Gas: 10 years (required)

Job Summary

The QA/QC Engineer will be responsible for ensuring that all operations, construction, and commissioning activities within the Oil and Gas project adhere to the highest standards of quality control and quality assurance. This position requires a strong understanding of industry codes and standards, inspection practices, and the ability to implement quality management systems effectively.

Key Responsibilities

• Quality Assurance & Control: Develop and implement QA/QC procedures, guidelines, and practices to ensure compliance with industry standards (e.g., ISO 9001, API, ASME).
• Quality Assurance & Control: Conduct inspections, audits, and assessments on materials, processes, and work operations to ensure compliance with specified standards.
• Quality Assurance & Control: Review technical documentation, including drawings, specifications, and standards to verify that all work meets project requirements.
• Quality Assurance & Control: Coordinate with various teams to ensure quality compliance at every stage of the project lifecycle.
• Inspection & Testing: Plan and supervise inspections and tests of materials, equipment, and structures to ensure they meet the required specifications.
• Inspection & Testing: Prepare and submit inspection reports, non-conformance reports (NCRs), and deviation reports.
• Inspection & Testing: Oversee the testing process and ensure correct procedures are followed during installation, construction, and commissioning.
• Documentation & Reporting: Maintain detailed records of inspections, audits, testing, and non-conformances.
• Documentation & Reporting: Ensure that all documentation is up to date and in compliance with company and regulatory requirements.
• Documentation & Reporting: Provide regular updates to senior management on quality performance and project status.
• Root Cause Analysis: Investigate quality issues, identify root causes, and propose corrective actions to resolve any issues.
• Root Cause Analysis: Implement and track corrective and preventive actions (CAPA) to ensure continuous improvement.
• Compliance & Safety: Ensure that all QA/QC processes comply with environmental, health, and safety (EHS) regulations.
• Compliance & Safety: Promote a culture of safety within the QA/QC function and ensure safety protocols are followed during inspections and audits.
• Collaboration: Collaborate with project management, engineering teams, and contractors to maintain high standards of quality.
• Collaboration: Communicate effectively with stakeholders to resolve quality-related issues and ensure timely project delivery.

Qualifications & Skills

Education: Bachelor's degree in Engineering (Mechanical, Civil, or Chemical Engineering preferred) or related field.

Experience: Minimum of 5 years of experience in QA/QC roles within the Oil and Gas industry, with a proven track record of handling large-scale projects.

Certifications:

• Certification in Quality Management (e.g., ISO 9001, Six Sigma, ASNT) is preferred.
• Knowledge of international codes and standards (e.g., API, ASME, ASTM) is essential.

Skills:

• Strong knowledge of inspection techniques, methods, and materials used in the Oil and Gas sector.
• Proficiency in QA/QC software tools and Microsoft Office Suite.
• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal skills.

Other Requirements

• Ability to work in a team-oriented environment.
• Willingness to travel to project sites as needed.

Mandatory Requirements

• Must have Oil & Gas industry experience.
• Must have Qatar Driving license.
• Transferable Visa with NOC will be preferred.

Job Summary

The QA/QC Engineer will be responsible for ensuring that all operations, construction, and commissioning activities within the Oil and Gas project adhere to the highest standards of quality control and quality assurance. This position requires a strong understanding of industry codes and standards, inspection practices, and the ability to implement quality management systems effectively.

Key Responsibilities

• Quality Assurance & Control: Develop and implement QA/QC procedures, guidelines, and practices to ensure compliance with industry standards (e.g., ISO 9001, API, ASME).
• Quality Assurance & Control: Conduct inspections, audits, and assessments on materials, processes, and work operations to ensure compliance with specified standards.
• Quality Assurance & Control: Review technical documentation, including drawings, specifications, and standards to verify that all work meets project requirements.
• Quality Assurance & Control: Coordinate with various teams to ensure quality compliance at every stage of the project lifecycle.
• Inspection & Testing: Plan and supervise inspections and tests of materials, equipment, and structures to ensure they meet the required specifications.
• Inspection & Testing: Prepare and submit inspection reports, non-conformance reports (NCRs), and deviation reports.
• Inspection & Testing: Oversee the testing process and ensure correct procedures are followed during installation, construction, and commissioning.
• Documentation & Reporting: Maintain detailed records of inspections, audits, testing, and non-conformances.
• Documentation & Reporting: Ensure that all documentation is up to date and in compliance with company and regulatory requirements.
• Documentation & Reporting: Provide regular updates to senior management on quality performance and project status.
• Root Cause Analysis: Investigate quality issues, identify root causes, and propose corrective actions to resolve any issues.
• Root Cause Analysis: Implement and track corrective and preventive actions (CAPA) to ensure continuous improvement.
• Compliance & Safety: Ensure that all QA/QC processes comply with environmental, health, and safety (EHS) regulations.
• Compliance & Safety: Promote a culture of safety within the QA/QC function and ensure safety protocols are followed during inspections and audits.
• Collaboration: Collaborate with project management, engineering teams, and contractors to maintain high standards of quality.
• Collaboration: Communicate effectively with stakeholders to resolve quality-related issues and ensure timely project delivery.

Qualifications & Skills

Education: Bachelor’s degree in Engineering (Mechanical, Civil, or Chemical Engineering preferred) or related field.

Experience: Minimum of 5 years of experience in QA/QC roles within the Oil and Gas industry, with a proven track record of handling large-scale projects.

Certifications:

• Certification in Quality Management (e.g., ISO 9001, Six Sigma, ASNT) is preferred.
• Knowledge of international codes and standards (e.g., API, ASME, ASTM) is essential.

Skills:

• Strong knowledge of inspection techniques, methods, and materials used in the Oil and Gas sector.
• Proficiency in QA/QC software tools and Microsoft Office Suite.
• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal skills.

Other Requirements

• Ability to work in a team-oriented environment.
• Willingness to travel to project sites as needed.

Mandatory Requirements

• Must have Oil & Gas industry experience.
• Must have Qatar Driving license.
• Transferable Visa with NOC will be preferred.

#J-18808-Ljbffr

• Produce a comprehensive and viable construction program in conjunction with the Project Manager or designates.
• Verify actual progress versus scheduled progress on a daily basis, alerting the Project Manager of any areas of concern regarding schedule slippage of line items and the knock-on effect to related activities.
• Maintain a constant critical path analysis.
• Close coordination with the material/purchase and stores departments.
• Analysis of actual and projected delivery dates and their scheduled impacts. Evaluation of early deliveries and possible schedule benefits.
• Maintain current revenue/cost status information and provide revenue/cost projections per activity.
• Continually provide the Project Manager with information on the most cost-effective manpower/equipment loading levels per activity.
• Provide constant support to the Project Manager in preparing the budget, cost analysis and ensure that the project remains within budgetary parameters and moves forward to a successful conclusion for both the client and company.
• Oversee the monthly client billing and certification.
• Address and coordinate the contractual issues related to time and schedule with all concerned.
• Generate the reports according to the client, project and corporate requirements.
• A wide degree of creativity and interpersonal skills is expected.
• Any other assignments given from time to time by the Project Manager/In charge of the Project/ Manager-Planning
  
  

Job Description

• Produce a comprehensive and viable construction program in conjunction with the Project Manager or designates.
• Verify actual progress versus scheduled progress on a daily basis, alerting the Project Manager of any areas of concern regarding schedule slippage of line items and the knock-on effect to related activities.
• Maintain a constant critical path analysis.
• Close coordination with the material/purchase and stores departments.
• Analysis of actual and projected delivery dates and their scheduled impacts. Evaluation of early deliveries and possible schedule benefits.
• Maintain current revenue/cost status information and provide revenue/cost projections per activity.
• Continually provide the Project Manager with information on the most cost-effective manpower/equipment loading levels per activity.

• Provide projections on earliest manpower/equipment, mobilization & demobilization dates.
• Provide constant support to the Project Manager in preparing the budget, cost analysis and ensure that the project remains within budgetary parameters and moves forward to a successful conclusion for both the client and company.
• Oversee the monthly client billing and certification.
• Address and coordinate the contractual issues related to time and schedule with all concerned.
• Generate the reports according to the client, project and corporate requirements.
• A wide degree of creativity and interpersonal skills is expected.
• Any other assignments given from time to time by the Project Manager/In charge of the Project/ Manager-Planning
  
  

Responsibilities

Sr. Planning Engineer (Oil & Gas) #J-18808-Ljbffr

Job Summary

The QA/QC Engineer will be responsible for ensuring that all operations, construction, and commissioning activities within the Oil and Gas project adhere to the highest standards of quality control and quality assurance. This position requires a strong understanding of industry codes and standards, inspection practices, and the ability to implement quality management systems effectively. Key Responsibilities Quality Assurance & Control: Develop and implement QA/QC procedures, guidelines, and practices to ensure compliance with industry standards (e.g., ISO 9001, API, ASME).

Quality Assurance & Control: Conduct inspections, audits, and assessments on materials, processes, and work operations to ensure compliance with specified standards.

Quality Assurance & Control: Review technical documentation, including drawings, specifications, and standards to verify that all work meets project requirements.

Quality Assurance & Control: Coordinate with various teams to ensure quality compliance at every stage of the project lifecycle.

Inspection & Testing: Plan and supervise inspections and tests of materials, equipment, and structures to ensure they meet the required specifications.

Inspection & Testing: Prepare and submit inspection reports, non-conformance reports (NCRs), and deviation reports.

Inspection & Testing: Oversee the testing process and ensure correct procedures are followed during installation, construction, and commissioning.

Documentation & Reporting: Maintain detailed records of inspections, audits, testing, and non-conformances.

Documentation & Reporting: Ensure that all documentation is up to date and in compliance with company and regulatory requirements.

Documentation & Reporting: Provide regular updates to senior management on quality performance and project status.

Root Cause Analysis: Investigate quality issues, identify root causes, and propose corrective actions to resolve any issues.

Root Cause Analysis: Implement and track corrective and preventive actions (CAPA) to ensure continuous improvement.

Compliance & Safety: Ensure that all QA/QC processes comply with environmental, health, and safety (EHS) regulations.

Compliance & Safety: Promote a culture of safety within the QA/QC function and ensure safety protocols are followed during inspections and audits.

Collaboration: Collaborate with project management, engineering teams, and contractors to maintain high standards of quality.

Collaboration: Communicate effectively with stakeholders to resolve quality-related issues and ensure timely project delivery.

Qualifications & Skills

Education:

Bachelor’s degree in Engineering (Mechanical, Civil, or Chemical Engineering preferred) or related field. Experience:

Minimum of 5 years of experience in QA/QC roles within the Oil and Gas industry, with a proven track record of handling large-scale projects. Certifications:

Certification in Quality Management (e.g., ISO 9001, Six Sigma, ASNT) is preferred.

Knowledge of international codes and standards (e.g., API, ASME, ASTM) is essential.

Skills:

Strong knowledge of inspection techniques, methods, and materials used in the Oil and Gas sector.

Proficiency in QA/QC software tools and Microsoft Office Suite.

Excellent analytical and problem-solving skills.

Strong communication and interpersonal skills.

Other Requirements Ability to work in a team-oriented environment.

Willingness to travel to project sites as needed.

Mandatory Requirements Must have Oil & Gas industry experience.

Must have Qatar Driving license.

Transferable Visa with NOC will be preferred.

#J-18808-Ljbffr