40 Performing Routine Maintenance jobs in Qatar

Overview

SOS International LLC (SOSi) is seeking a Facilities Maintenance Technician. The tasks performed shall include but not be limited to minor plumbing, carpentry, sheet metal, welding, locksmithing, and minor movement and reconfiguration of furniture in support of a Government customer at Al Udeid Air Base, Qatar.

Essential Job Duties

Perform repairs, renovations, and preventive maintenance on customer facilities. Remodel, retrofit, and repair interior and exterior structures made of wood, light gauge metal, drywall, or plaster, and the associated plumbing systems. Perform troubleshooting and user-level preventive maintenance checks on plumbing systems and ensure higher-level preventive maintenance inspections are being conducted. Provide minor repairs to plumbing systems (water, sewage, and wastewater), old piping, clogged fixtures, leaky faucets, and equipment; check old pipes for fit, soundness, and operation; and maintain available back-up assets on hand to ensure operational levels. Conduct coordination with other facility maintenance tradesmen and civil engineering authorities. Work from blueprints, specifications, drawings, and instructions to remodel, retrofit, maintain, and repair various types of facilities and structures. Inspect completed work for conformance with specifications, requirements and compliance with applicable building and safety codes and regulations; inspect related work by contractors. Plan, install, repair, alter, and/or replace furnishings, fixtures, equipment, appliances, and finishes to include doors, flooring, ceilings, and cabinets as necessary. This includes inspection, maintenance, repair or improvement of roofing components, windows, exterior drainage.

Minimum Requirements

Active in Scope TS/SCI security clearance. Five years of relevant facility maintenance experience. Experience with maintenance of residential and commercial structural, plumbing, locksmith, fencing, gating, furnishings or other common fixtures and systems. Must be able to safely use manual tools and power equipment common in the construction and facilities trades.

Preferred Qualifications

Understanding of the Air Force or Army culture, language and expectations for mission success. Knowledge of welding and sheet metal fabrication for minor maintenance and repair of flashing, ducting, fencing, turnstiles, signage, and other structural components.

Work Environment

Full-time position with standard working hours; may require occasional evening or weekend work. Work is performed both indoors and outdoors, in various weather conditions. Exposure to potentially hazardous materials and environments; appropriate safety measures must be followed.

Working at SOSi

All interested individuals will receive consideration and will not be discriminated against for any reason. Active in Scope TS/SCI security clearance. Five years of relevant facility maintenance experience. Experience with maintenance of residential and commercial structural, plumbing, locksmith, fencing, gating, furnishings or other common fixtures and systems. Must be able to safely use manual tools and power equipment common in the construction and facilities trades. Perform repairs, renovations, and preventive maintenance on customer facilities. Remodel, retrofit, and repair interior and exterior structures made of wood, light gauge metal, drywall, or plaster, and the associated plumbing systems. Perform troubleshooting and user-level preventive maintenance checks on plumbing systems and ensure higher-level preventive maintenance inspections are being conducted. Provide minor repairs to plumbing systems (water, sewage, and wastewater), old piping, clogged fixtures, leaky faucets, and equipment; check old pipes for fit, soundness, and operation; and maintain available back-up assets on hand to ensure operational levels. Conduct coordination with other facility maintenance tradesmen and civil engineering authorities. Work from blueprints, specifications, drawings, and instructions to remodel, retrofit, maintain, and repair various types of facilities and structures. Inspect completed work for conformance with specifications, requirements and compliance with applicable building and safety codes and regulations; inspect related work by contractors. Plan, install, repair, alter, and/or replace furnishings, fixtures, equipment, appliances, and finishes to include doors, flooring, ceilings, and cabinets as necessary. This includes inspection, maintenance, repair or improvement of roofing components, windows, exterior drainage.

#J-18808-Ljbffr

**We are looking to hire a qualified Senior Facility Maintenance to join our dynamic team.**
- This role ensures that the Mechanics are available in a timely manner to maintain the successful maintenance of buses at the Depot.
- Equipment Maintenance - performing routine maintenance on equipment and determining when and what kind of maintenance is needed
- Provides assistance for updating, tracking, and scheduling service inspections and checks
- Supports contract maintenance and troubleshoots maintenance discrepancies
- Ensures on time repair solutions for maintenance
- Supervises and coordinates to affect on time repairs
- Ensures timely decisions for schedule changes with respect to maintenance and daily operations schedule
- Supervises over-night maintenance, if required
- Coordinates with Depot Scheduling Staff to ensure service
- Supports and coordinates contract maintenance services, as required

**Experience**:

- Senior Facility Maintenance: 3 years (required)

**Language**:

- English (required)

License/Certification:

- Mechanical/Engineering Certificate or Diploma (required)

**Job Purpose**

We are looking for a competent Maintenance Supervisor to manage maintenance in facilities. The supervisor will be responsible for training staff and ensuring the smooth running of upkeep or repair operations. An excellent maintenance supervisor must be reliable and have a great eye for detail. He must have technical skills and knowledge of various crafts such as Electrical HVAC and Civil etc.

**Duties and Responsibilities**
- Inspects facilities periodically to determine problems and necessary maintenance and Prepare maintenance schedules and allocate work
- Inspects and maintain building systems on a weekly basis Contribute to the development of maintenance budget and ensure compliance
- Monitors inventory of materials and equipment
- Participates in coordination of projects (e.g. renovations)
- Ensures adherence to quality standards and health and safety regulations
- Arranges for and manages appropriate third-party contractor support as needed.
- Prepares budgets and secures estimates and cost quotes as needed.
- Procurement: Assist the Procurement officer on special projects focused on cost reduction initiatives and process improvement and purchase materials from the local market in case if its required for urgent replacement.
- Team Management: make sure team members perform their tasks in a timely and organized manner. Their responsibilities include assigning tasks, training employees, providing feedback, mediating interpersonal conflicts, and implementing company procedures
- Answer all emergency calls 24/7) from tenant and take necessary actions as required.
- Any other duties / responsibilities as assigned time to time based on business requirements.

**Job Types**: Full-time, Permanent

**Education**:

- Diploma (required)

**Experience**:

- Maintenance Supervisor or similar role: 5 years (required)
- Technical Knowledge of all Building Systems: 3 years (required)

License/Certification:

- Qatari Driver License (required)

Lead the Maintenance function in providing both a reactive (breakdown) and pro-active (preventative), multi-skilled maintenance service on all operational equipment, services and infrastructure to ensure increased and sustainable availability is achieved in line with the deliberate maintenance strategy, and with due consideration to the Original Equipment Manufacturer (OEM) guidance.

Responsible for the conduct of all maintenance functions, pro-active maintenance planning and scheduling, overseeing the adherence thereto and timely completion of work carried out. Increase the site operational effectiveness through the development of Service Level Agreements, improve on project delivery, mean time between failure and downtime reduction, ensuring that Health, Safety, Environmental, and Quality requirements are adhered to.

Manage the teams to deliver technical best practice. Establish and implement policies and procedures. Manage departmental delivery against continuous improvement Key Performance Indicators (KPIs) and champion modern maintenance principles by highlighting deficiencies and recommending changes in policy, process, training, and working practices whilst also mentoring and leading the maintenance departments.

Accountabilities

Key Accountabilities :

• Develop, implement and manage a comprehensive Maintenance Strategy.
• Develop, implement and manage key performance indicators (KPIs) for each area of responsibility.
• Develop, implement and manage maintenance department policies and procedures.
• Supervise and coordinate the implementation and effective use of a Computerized Maintenance Management System.
• Ensure that all equipment and buildings are safe to use and fit for purpose.
• Plan and schedule all maintenance activities while considering vessel stemming schedule and production work to increase and sustain higher equipment Availability in line with Original Equipment Manufacturer (OEM) set limits.
• Ensure that inventory levels of parts and materials are maintained to support seamless execution of both preventative and planned maintenance activities. In parallel, work to ensure that there are multiple supplier options in place for all core equipment spares.
• Further establish and develop standardized service and repair procedures for key equipment, including standardized parts lists for planned maintenance activities.
• Identify business improvement opportunities.
• Develop, implement and manage a continuous improvement program.
• Manage, coach and develop a high performing maintenance team that meets agreed objectives.
• Prepare and present reports.
• Review, implement, and update department records.
• Prepare and manage the annual maintenance budget and forecasts.
• Authorizes purchase of equipment, spares and materials needed 16) Prepare scope of work for any maintenance work contracted out.
• Take part in technical review and assessment of contractors.
• Manage contractors on site to ensure they meet company requirements.
• Render expert Maintenance Management advice to on all matters related to maintenance of facilities, equipment and systems.
• Ensure the maintenance of a library containing full maintenance records, requirements, technical documents, maintenance standards, norms, dossiers, and material specifications related to the maintenance.
• Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance.
• Work Collaboratively with all stakeholders.
• Ensures good housekeeping at the facilities and work areas of the department.
• Plan and supervise office space utilization and furnishing and source various items such as office stationery.
• Perform other duties as may be required.
• Employee should prioritize the well-being of themselves and their colleagues while maintaining a safe and healthy work environment. Adhere to all health & safety protocols, participate in wellbeing & wellness programs, and promptly report any concerns regarding the wellbeing of oneself & others in order to foster a culture of best practice.

Qualifications, Experience and Job Skills

Qualifications :

• BSc in mechanical, electrical or process engineering.
• Membership of an appropriate international professional body.
• Registered as (or formally working towards) Incorporated Engineer or equivalent.

Experience :

• 10 to 12 years' experience in a similar role, at least five 5 years of which must have been in a senior maintenance role, in the execution of major projects and / or performance improvement projects in related industries.

Job Specific Competencies :

Technical Competency

• Multitasking and result oriented.
• Team building & Ability to manage multicultural workforce.
• Innovative and creative
• Leadership Skills
• Project Management Skills
• Knowledge of Shipyard Operations
• Analytical Thinking and problem-solving skills

#J-18808-Ljbffr

Lead the Maintenance function in providing both a reactive (breakdown) and pro-active (preventative), multi-skilled maintenance service on all operational equipment, services and infrastructure to ensure increased and sustainable availability is achieved in line with the deliberate maintenance strategy, and with due consideration to the Original Equipment Manufacturer (OEM) guidance. Responsible for the conduct of all maintenance functions, pro-active maintenance planning and scheduling, overseeing the adherence thereto and timely completion of work carried out. Increase the site operational effectiveness through the development of Service Level Agreements, improve on project delivery, mean time between failure and downtime reduction, ensuring that Health, Safety, Environmental, and Quality requirements are adhered to. Manage the teams to deliver technical best practice. Establish and implement policies and procedures. Manage departmental delivery against continuous improvement Key Performance Indicators (KPIs) and champion modern maintenance principles by highlighting deficiencies and recommending changes in policy, process, training, and working practices whilst also mentoring and leading the maintenance departments. Accountabilities Key Accountabilities : Develop, implement and manage a comprehensive Maintenance Strategy. Develop, implement and manage key performance indicators (KPIs) for each area of responsibility. Develop, implement and manage maintenance department policies and procedures. Supervise and coordinate the implementation and effective use of a Computerized Maintenance Management System. Ensure that all equipment and buildings are safe to use and fit for purpose. Plan and schedule all maintenance activities while considering vessel stemming schedule and production work to increase and sustain higher equipment Availability in line with Original Equipment Manufacturer (OEM) set limits. Ensure that inventory levels of parts and materials are maintained to support seamless execution of both preventative and planned maintenance activities. In parallel, work to ensure that there are multiple supplier options in place for all core equipment spares. Further establish and develop standardized service and repair procedures for key equipment, including standardized parts lists for planned maintenance activities. Identify business improvement opportunities. Develop, implement and manage a continuous improvement program. Manage, coach and develop a high performing maintenance team that meets agreed objectives. Prepare and present reports. Review, implement, and update department records. Prepare and manage the annual maintenance budget and forecasts. Authorizes purchase of equipment, spares and materials needed 16) Prepare scope of work for any maintenance work contracted out. Take part in technical review and assessment of contractors. Manage contractors on site to ensure they meet company requirements. Render expert Maintenance Management advice to on all matters related to maintenance of facilities, equipment and systems. Ensure the maintenance of a library containing full maintenance records, requirements, technical documents, maintenance standards, norms, dossiers, and material specifications related to the maintenance. Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance. Work Collaboratively with all stakeholders. Ensures good housekeeping at the facilities and work areas of the department. Plan and supervise office space utilization and furnishing and source various items such as office stationery. Perform other duties as may be required. Employee should prioritize the well-being of themselves and their colleagues while maintaining a safe and healthy work environment. Adhere to all health & safety protocols, participate in wellbeing & wellness programs, and promptly report any concerns regarding the wellbeing of oneself & others in order to foster a culture of best practice. Qualifications, Experience and Job Skills Qualifications : BSc in mechanical, electrical or process engineering. Membership of an appropriate international professional body. Registered as (or formally working towards) Incorporated Engineer or equivalent. Experience : 10 to 12 years' experience in a similar role, at least five 5 years of which must have been in a senior maintenance role, in the execution of major projects and / or performance improvement projects in related industries. Job Specific Competencies : Technical Competency Multitasking and result oriented. Team building & Ability to manage multicultural workforce. Innovative and creative Leadership Skills Project Management Skills Knowledge of Shipyard Operations Analytical Thinking and problem-solving skills

#J-18808-Ljbffr

Filiale internationale du groupe SPIE spécialisée dans le domaine de l'énergie, SPIE Oil & Gas Services travaille au cœur des infrastructures de production d'énergie depuis plusieurs décennies pour les concevoir, les installer, les démarrer et les entretenir, le tout dans les meilleures conditions de sécurité, qualité, coûts et délais.

Avec près de 3 100 collaborateurs de 70 nationalités différentes présents dans une trentaine de pays en Europe, en Afrique, en Asie-Pacifique et au Moyen-Orient, SPIE Oil & Gas Services offre, à ses clients de l'industrie du pétrole, du gaz et des énergies renouvelables, des solutions durables dans les domaines suivants : well delivery & management, projects, engineering & construction, assessment & competency development, commissioning & start up, operations, maintenance & asset integrity.

Avec près de 45 500 collaborateurs et un fort ancrage local, SPIE a réalisé, en 2020, un chiffre d'affaires consolidé de 6,6 milliards d'euros et un EBITA consolidé de 339 millions d'euros.

We currently have an opportunity within SPIE Oil & Gas Services Middle East LLC Doha, Qatar for a

Maintenance Technician - Rotating Equipment

**Job Purpose**:
To optimize production downtime when executing maintenance activities
Contributing to the development and review of risk assessments.

**Your main duties will be to**:
- To optimize the reliability and availability of equipment under area of responsibility through completing maintenance activities in accordance with approved procedures and guidelines
Act as Permit Performing authority to ensure that all works are carried out in accordance with the PTW process and company requirement
Provide the Mechanical Supervisor with analysis and comment on maintenance opportunities in order to improve the performance
Provide visible leadership
Promote cost consciousness
Ensure compliance with operating procedures and guidelines to ensure safety
Carry out repairs to mechanical equipment and perform preventive maintenance
Contribute to identifying improvements in planned maintenance routines
Prepare isolate and make safe mechanical equipment for maintenance

Ideally, you will have graduated with minimum Higher Secondary School Education plus a three-year technical diploma (HNC, HND or equivalent) in Mechanical from a recognized institution.

**Relevant Work Experience**: Minimum of 10 years of maintenance experience with at least 5 years offshore level on-field equipment in diversified oil & gas processing or petrochemical plants.
You are fluent in English with both written and verbal communication
You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.

Ideally, you will have graduated with minimum Higher Secondary School Education plus a three-year technical diploma (HNC, HND or equivalent) in Mechanical from a recognized institution.

**Relevant Work Experience**: Minimum of 10 years of maintenance experience with at least 5 years offshore level on-field equipment in diversified oil & gas processing or petrochemical plants.

You are fluent in English with both written and verbal communication

You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.

3 ans ou plus

E-BAC+3 ou équivalent (FR) / Bachelor (BE)

Overview

The Senior Maintenance Engineer leverages deep understanding of maintenance strategies in order to contribute to day-to-day operational maintenance expertise and leadership, and supports the Head of Maintenance in monitoring and implementing the strategies for managing shipyard assets throughout their lifecycle. All work is executed to a high quality & auditable standard that is consistent with the company's integrated management systems and policies. As a senior officer, a high level of technical skill and experience is demanded and is expected to be demonstrably applied to technical problems and monitoring of trades employees.

Reports To Head of Maintenance

Direct Reports Maintenance Supervisor

PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES

Accountabilities

1. Develops a deep understanding of the yard specific maintenance strategy and supports the Head of Maintenance in breaking strategy down into short to medium time horizon work plans and tactics. Supports the implementation of all aspect of the Maintenance Strategy
2. Maintain all lifting equipment
3. Maintain all mobile equipment
4. Prepare and manage all spare parts required for the maintenance of the equipment and related assets. Support the Head of Maintenance in the preparation of maintenance strategies to reduce failure rates of equipment and improve maintenance KPIs.
5. Prepare RCA reports and provide Head of Maintenance with proposals for preventing repeat failures and ensuring lessons learned.
6. Prepare scopes of work and tender documentation for subcontractors.
7. Supervise subcontractors and ensure compliance with scope of work.
8. Lead and supervise maintenance technicians.
9. Prepare risk assessments and apply required permits.
10. Maintain maintenance records.
11. Coordinate with relevant authorities and obtain approvals for any changes to systems and structures.
12. Communicate upwards - training needs, process improvement suggestions and follow up on implementation.
13. Schedule and prioritize work considering all available resources.
14. Demonstrate work behaviors consistent with company values and work within company policies, standards, procedures, and any legislative requirements.
15. Adhere to health, safety, security and environmental policies, procedures, instructions, and controls for the safety of self and others.
16. Ensure compliance to quality management procedures and controls to deliver high quality services and products.
17. Follow all safety procedures and report lapses, if any. Monitors yard facilities and reports to the Head of Maintenance, where necessary.

1. Takes corrective action on errors as defined in the IMS, as necessary.
2. Achieves Performance Indicators as defined in the Qatar Shipyard Quality Policy and Objectives Matrix.
3. Maintains the SAP Module is maintained according to the schedule.
4. Implements and monitors compliance to department budgets and raises any requirement to deviate from them. Monitors approved subcontractors.
5. Demonstrates leadership at a monthly section review meeting.
6. Supports execution of daily operations, making sure maintenance plans are met.
7. Contributes with timely updates and inputs such as lead and lag indication data to inform stakeholders to support internal decision making and performance review processes.
8. Models a collaborative and cross-organizational relationship within and between maintenance and operations and support functions to ensure alignment to desired high performance culture.
9. Drives a safety culture within the team through role modelling safety values and behaviors. Ensures compliance with health, safety, security and environment standards.
10. Ensures achievement of key performance indicators & addresses performance issues.
11. Applies skills, knowledge, and ability to ensure people and resources enable production throughput rate to be safely achievable in line with Section Plan and KPIs in line with Qatar Shipyard Technology Solutions Values and IMS system.
12. Drives high quality standards in the department to ensure all employees comply to deliver high quality services and products and achieve customer satisfaction.
13. Performs any other assigned duties and responsibilities.
14. Employee should prioritize wellbeing of themselves and their colleagues while maintaining a safe and healthy work environment. Adhere to all health & safety protocols, participate in wellbeing & wellness programs, and promptly report any concerns regarding the wellbeing of oneself & others in order to foster a culture of best practice.

Interactions and Working Relations

Internal: All Operations sections in Qatar Shipyard Technology Solutions Maintenance, HSE Sections, Plant & Maintenance

External: Ship/Vessel crew, clients, Sub-Contractors, Vendors and OEM

Qualifications and Experience

Qualifications:

• A Degree in Naval Architecture, Marine Engineering, Mechanical Engineering, Electrical Engineering, Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent.

Experience:

• 10 years of relevant working experience in the industry.

Overview

The Senior Maintenance Engineer leverages deep understanding of maintenance strategies in order to contribute to day-to-day operational maintenance expertise and leadership, and supports the Head of Maintenance in monitoring and implementing the strategies for managing shipyard assets throughout their lifecycle. All work is executed to a high quality & auditable standard that is consistent with the company’s integrated management systems and policies. As a senior officer, a high level of technical skill and experience is demanded and is expected to be demonstrably applied to technical problems and monitoring of trades employees.

Reports To Head of Maintenance

Direct Reports Maintenance Supervisor

PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES

Accountabilities

1. Develops a deep understanding of the yard specific maintenance strategy and supports the Head of Maintenance in breaking strategy down into short to medium time horizon work plans and tactics. Supports the implementation of all aspect of the Maintenance Strategy
2. Maintain all lifting equipment
3. Maintain all mobile equipment
4. Prepare and manage all spare parts required for the maintenance of the equipment and related assets. Support the Head of Maintenance in the preparation of maintenance strategies to reduce failure rates of equipment and improve maintenance KPIs.
5. Prepare RCA reports and provide Head of Maintenance with proposals for preventing repeat failures and ensuring lessons learned.
6. Prepare scopes of work and tender documentation for subcontractors.
7. Supervise subcontractors and ensure compliance with scope of work.
8. Lead and supervise maintenance technicians.
9. Prepare risk assessments and apply required permits.
10. Maintain maintenance records.
11. Coordinate with relevant authorities and obtain approvals for any changes to systems and structures.
12. Communicate upwards – training needs, process improvement suggestions and follow up on implementation.
13. Schedule and prioritize work considering all available resources.
14. Demonstrate work behaviors consistent with company values and work within company policies, standards, procedures, and any legislative requirements.
15. Adhere to health, safety, security and environmental policies, procedures, instructions, and controls for the safety of self and others.
16. Ensure compliance to quality management procedures and controls to deliver high quality services and products.
17. Follow all safety procedures and report lapses, if any. Monitors yard facilities and reports to the Head of Maintenance, where necessary.

1. Takes corrective action on errors as defined in the IMS, as necessary.
2. Achieves Performance Indicators as defined in the Qatar Shipyard Quality Policy and Objectives Matrix.
3. Maintains the SAP Module is maintained according to the schedule.
4. Implements and monitors compliance to department budgets and raises any requirement to deviate from them. Monitors approved subcontractors.
5. Demonstrates leadership at a monthly section review meeting.
6. Supports execution of daily operations, making sure maintenance plans are met.
7. Contributes with timely updates and inputs such as lead and lag indication data to inform stakeholders to support internal decision making and performance review processes.
8. Models a collaborative and cross-organizational relationship within and between maintenance and operations and support functions to ensure alignment to desired high performance culture.
9. Drives a safety culture within the team through role modelling safety values and behaviors. Ensures compliance with health, safety, security and environment standards.
10. Ensures achievement of key performance indicators & addresses performance issues.
11. Applies skills, knowledge, and ability to ensure people and resources enable production throughput rate to be safely achievable in line with Section Plan and KPIs in line with Qatar Shipyard Technology Solutions Values and IMS system.
12. Drives high quality standards in the department to ensure all employees comply to deliver high quality services and products and achieve customer satisfaction.
13. Performs any other assigned duties and responsibilities.
14. Employee should prioritize wellbeing of themselves and their colleagues while maintaining a safe and healthy work environment. Adhere to all health & safety protocols, participate in wellbeing & wellness programs, and promptly report any concerns regarding the wellbeing of oneself & others in order to foster a culture of best practice.

Interactions and Working Relations

Internal: All Operations sections in Qatar Shipyard Technology Solutions Maintenance, HSE Sections, Plant & Maintenance

External: Ship/Vessel crew, clients, Sub-Contractors, Vendors and OEM

Qualifications and Experience

Qualifications:

• A Degree in Naval Architecture, Marine Engineering, Mechanical Engineering, Electrical Engineering, Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent.

Experience:

• 10 years of relevant working experience in the industry.

#J-18808-Ljbffr

Overview The Senior Maintenance Engineer leverages deep understanding of maintenance strategies in order to contribute to day-to-day operational maintenance expertise and leadership, and supports the Head of Maintenance in monitoring and implementing the strategies for managing shipyard assets throughout their lifecycle. All work is executed to a high quality & auditable standard that is consistent with the company’s integrated management systems and policies. As a senior officer, a high level of technical skill and experience is demanded and is expected to be demonstrably applied to technical problems and monitoring of trades employees.

Reports To

Head of Maintenance

Direct Reports

Maintenance Supervisor

PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES

Accountabilities

Develops a deep understanding of the yard specific maintenance strategy and supports the Head of Maintenance in breaking strategy down into short to medium time horizon work plans and tactics. Supports the implementation of all aspect of the Maintenance Strategy

Maintain all lifting equipment

Maintain all mobile equipment

Prepare and manage all spare parts required for the maintenance of the equipment and related assets. Support the Head of Maintenance in the preparation of maintenance strategies to reduce failure rates of equipment and improve maintenance KPIs.

Prepare RCA reports and provide Head of Maintenance with proposals for preventing repeat failures and ensuring lessons learned.

Prepare scopes of work and tender documentation for subcontractors.

Supervise subcontractors and ensure compliance with scope of work.

Lead and supervise maintenance technicians.

Prepare risk assessments and apply required permits.

Maintain maintenance records.

Coordinate with relevant authorities and obtain approvals for any changes to systems and structures.

Communicate upwards – training needs, process improvement suggestions and follow up on implementation.

Schedule and prioritize work considering all available resources.

Demonstrate work behaviors consistent with company values and work within company policies, standards, procedures, and any legislative requirements.

Adhere to health, safety, security and environmental policies, procedures, instructions, and controls for the safety of self and others.

Ensure compliance to quality management procedures and controls to deliver high quality services and products.

Follow all safety procedures and report lapses, if any. Monitors yard facilities and reports to the Head of Maintenance, where necessary.

Takes corrective action on errors as defined in the IMS, as necessary.

Achieves Performance Indicators as defined in the Qatar Shipyard Quality Policy and Objectives Matrix.

Maintains the SAP Module is maintained according to the schedule.

Implements and monitors compliance to department budgets and raises any requirement to deviate from them. Monitors approved subcontractors.

Demonstrates leadership at a monthly section review meeting.

Supports execution of daily operations, making sure maintenance plans are met.

Contributes with timely updates and inputs such as lead and lag indication data to inform stakeholders to support internal decision making and performance review processes.

Models a collaborative and cross-organizational relationship within and between maintenance and operations and support functions to ensure alignment to desired high performance culture.

Drives a safety culture within the team through role modelling safety values and behaviors. Ensures compliance with health, safety, security and environment standards.

Ensures achievement of key performance indicators & addresses performance issues.

Applies skills, knowledge, and ability to ensure people and resources enable production throughput rate to be safely achievable in line with Section Plan and KPIs in line with Qatar Shipyard Technology Solutions Values and IMS system.

Drives high quality standards in the department to ensure all employees comply to deliver high quality services and products and achieve customer satisfaction.

Performs any other assigned duties and responsibilities.

Employee should prioritize wellbeing of themselves and their colleagues while maintaining a safe and healthy work environment. Adhere to all health & safety protocols, participate in wellbeing & wellness programs, and promptly report any concerns regarding the wellbeing of oneself & others in order to foster a culture of best practice.

Interactions and Working Relations Internal:

All Operations sections in Qatar Shipyard Technology Solutions Maintenance, HSE Sections, Plant & Maintenance

External:

Ship/Vessel crew, clients, Sub-Contractors, Vendors and OEM

Qualifications and Experience Qualifications:

A Degree in Naval Architecture, Marine Engineering, Mechanical Engineering, Electrical Engineering, Certificate of Competency (Marine Engineer Officer) Class 1 (Motorship), or its equivalent.

Experience:

10 years of relevant working experience in the industry.

#J-18808-Ljbffr