5 Power Generation jobs in Qatar

Field Operator, Power Generation & Distribution

Join to apply for the Field Operator, Power Generation & Distribution role at QAFCO (Qatar Fertiliser Company) .

The role holders will be responsible for operating and monitoring field equipment across all field areas of the Power Station/Power Generation plant to achieve optimal operational status. They will work in shifts, have an emergency response role, and must ensure all activities comply with QAFCO's Integrated Management Systems procedures. They have the authority to make emergency field decisions according to equipment operating procedures and emergency handling protocols, in consultation with the Panel Operator and Shift Supervisor.

Key Responsibilities

• Operate field equipment following safety and operational procedures to maintain effective and optimal equipment performance. Make decisions to start or stop equipment based on experience and abnormal conditions.
• Monitor and log operational parameters, report irregularities to the panel operator or Shift Supervisor for resolution.
• Participate in prescribed off-the-job training courses or have equivalent education and experience to enhance operational knowledge.
• Gain comprehensive understanding of operational procedures through on-the-job training to ensure effective plant operation.
• Provide immediate response during emergencies or major incidents to minimize damage or loss, making appropriate decisions based on the situation.
• Assist in training new operators to develop necessary skills for independent operation of assigned plant areas.
• Maintain a clean and safe work environment by adhering to housekeeping procedures.

Candidate Profile

• High School diploma plus 2-year relevant discipline diploma.
• At least 5 years of direct experience in fertilizer, petrochemical, chemical, or oil & gas industries.
• Experience with start-up/shutdown and normal operations of power stations, including gas turbines, transformers, pumps, motors, batteries, PLCs, substations, switchboards, and circuit breakers. Experience with GE Frame 6 turbines, Rolls Royce Avon generators, and control systems like Speedtronic Mark V and Honeywell TDC 3000 is advantageous.
• Knowledge of power generation processes involving steam and gas turbines, power distribution, DCS processes, and safety systems.
• Ability to manage emergency or critical situations safely, including start-up and shut-down procedures.
• Ability to interpret engineering diagrams and specifications.
• Proficiency with firefighting equipment and the Permit to Work system.

Additional Details

• Seniority Level: Mid-Senior level
• Employment Type: Full-time
• Job Function: Other
• Industry: Chemical Manufacturing

This job posting is active. Referrals can increase your chances of interviewing at QAFCO by 2x. Notifications are available for new Distribution Operator jobs in Mesaieed, Al Wakrah, Qatar.

#J-18808-Ljbffr

Join to apply for the SM Engineering - Power plant (CAMO) role at Qatar Airways

About The Role

As a SM Engineering - Power Plant (CAMO), you will be responsible to ensure that aircraft, engines and APUs are compliant with all applicable and future airworthiness requirements, Qatar Civil Aviation Authority (QCAA) safety regulations, operational requirements, corporate requirements and maintained at the highest levels of technical dispatch reliability. You will oversee all activities in Engineering sections, ensuring continuous compliance with airworthiness requirements to fulfil QCAA Part CAMO responsibilities. Create and lead the implementation of operational strategy that ensures the organization meets and maintains all required safety and compliance requirements keeping reliability and compliance requirements as per company targets. Create and lead the implementation of commercial and cost effective operational strategy to meet the Company's commercial goals.

Duties And Responsibilities

Technical

• Set the objectives and priorities for short, medium and long-term plans in order to achieve the targets of technical/operational reliability for Engines and APUs.
• Develop and review procedures and processes for efficiency, effectiveness and compliance with applicable regulations and requirements. Initiate new procedures or revisions to existing procedures, as required.
• Develop applicable quality and safety processes and procedures within areas of assigned responsibility, and establish and manage a safety management system, as required.
• Ensure an adequate independent quality audit system is developed, managed and maintained to company and regulatory requirements.
• Establish and manage implementation of appropriate control measures/key performance indicators related to safety, compliance, and reliability.

Commercial

• Set the objectives for short, medium and long-term plans to reduce Engine and APU Direct Maintenance Cost.
• Develop procedures and processes for efficiency, effectiveness and compliance with applicable regulations and requirements. Initiate new procedures or revisions to existing procedures, as required.
• Establish a system and oversee a team to manage Engine and APU contracts.
• Lead strategic procurement activities related to Power Plants.
• Prepare budget with Business Finance, be prepared to discuss it with higher management, and manage outsourced programs to ensure spend is within budget.
• Define and assign key performance indicators leading to achieve company's commercial targets.

Be part of an extraordinary story

Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You'll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community.

Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what's never been done before.

Together, everything is possible.

Qualifications About you

• Bachelor's degree or equivalent in Aeronautical, Mechanical, Electrical or Electronics.
• Experience as a Development Engineer with the supervisory/management role.
• Experience in technical management positions in Development Engineering discipline.
• Master's degree in above-mentioned fields or in Engineering Management or Business Administration.
• Extreme knowledge in organizational, interpersonal, communication and negotiation skills.
• Ability to work with a multinational team of professionals.
• Ability to quickly identify potentially critical issues and define mitigation plans.

About Qatar Airways Group

Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We've grown fast, broken records and set trends that others follow. We don't slow down by the fear of failure. Instead, we dare to achieve what's never been done before. Whether you're creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

Job Details

• Seniority level: Mid-Senior level
• Employment type: Full-time
• Job function: Engineering and Information Technology
• Industries: Airlines and Aviation

Referrals increase your chances of interviewing at Qatar Airways by 2x

Get notified about new Engineering Specialist jobs in Doha Metropolitan Area.

Job application

Join to apply for the SM Engineering - Power plant (CAMO) role at Qatar Airways

About The Role

As a SM Engineering - Power Plant (CAMO), you will be responsible to ensure that aircraft, engines and APUs are compliant with all applicable and future airworthiness requirements, Qatar Civil Aviation Authority (QCAA) safety regulations, operational requirements, corporate requirements and maintained at the highest levels of technical dispatch reliability. You will oversee all activities in Engineering sections, ensuring continuous compliance with airworthiness requirements to fulfil QCAA Part CAMO responsibilities. Create and lead the implementation of operational strategy that ensures the organization meets and maintains all required safety and compliance requirements keeping reliability and compliance requirements as per company targets. Create and lead the implementation of commercial and cost effective operational strategy to meet the Company’s commercial goals.

Duties And Responsibilities

Technical

• Set the objectives and priorities for short, medium and long-term plans in order to achieve the targets of technical/operational reliability for Engines and APUs.
• Develop and review procedures and processes for efficiency, effectiveness and compliance with applicable regulations and requirements. Initiate new procedures or revisions to existing procedures, as required.
• Develop applicable quality and safety processes and procedures within areas of assigned responsibility, and establish and manage a safety management system, as required.
• Ensure an adequate independent quality audit system is developed, managed and maintained to company and regulatory requirements.
• Establish and manage implementation of appropriate control measures/key performance indicators related to safety, compliance, and reliability.

Commercial

• Set the objectives for short, medium and long-term plans to reduce Engine and APU Direct Maintenance Cost.
• Develop procedures and processes for efficiency, effectiveness and compliance with applicable regulations and requirements. Initiate new procedures or revisions to existing procedures, as required.
• Establish a system and oversee a team to manage Engine and APU contracts.
• Lead strategic procurement activities related to Power Plants.
• Prepare budget with Business Finance, be prepared to discuss it with higher management, and manage outsourced programs to ensure spend is within budget.
• Define and assign key performance indicators leading to achieve company’s commercial targets.

Be part of an extraordinary story

Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community.

Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before.

Together, everything is possible.

Qualifications About you

• Bachelor’s degree or equivalent in Aeronautical, Mechanical, Electrical or Electronics.
• Experience as a Development Engineer with the supervisory/management role.
• Experience in technical management positions in Development Engineering discipline.
• Master’s degree in above-mentioned fields or in Engineering Management or Business Administration.
• Extreme knowledge in organizational, interpersonal, communication and negotiation skills.
• Ability to work with a multinational team of professionals.
• Ability to quickly identify potentially critical issues and define mitigation plans.

About Qatar Airways Group

Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. Whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

Job Details

• Seniority level: Mid-Senior level
• Employment type: Full-time
• Job function: Engineering and Information Technology
• Industries: Airlines and Aviation

Referrals increase your chances of interviewing at Qatar Airways by 2x

Get notified about new Engineering Specialist jobs in Doha Metropolitan Area.

Job application

#J-18808-Ljbffr

Join to apply for the

SM Engineering - Power plant (CAMO)

role at

Qatar Airways

About The Role As a SM Engineering - Power Plant (CAMO), you will be responsible to ensure that aircraft, engines and APUs are compliant with all applicable and future airworthiness requirements, Qatar Civil Aviation Authority (QCAA) safety regulations, operational requirements, corporate requirements and maintained at the highest levels of technical dispatch reliability. You will oversee all activities in Engineering sections, ensuring continuous compliance with airworthiness requirements to fulfil QCAA Part CAMO responsibilities. Create and lead the implementation of operational strategy that ensures the organization meets and maintains all required safety and compliance requirements keeping reliability and compliance requirements as per company targets. Create and lead the implementation of commercial and cost effective operational strategy to meet the Company’s commercial goals.

Duties And Responsibilities Technical

Set the objectives and priorities for short, medium and long-term plans in order to achieve the targets of technical/operational reliability for Engines and APUs.

Develop and review procedures and processes for efficiency, effectiveness and compliance with applicable regulations and requirements. Initiate new procedures or revisions to existing procedures, as required.

Develop applicable quality and safety processes and procedures within areas of assigned responsibility, and establish and manage a safety management system, as required.

Ensure an adequate independent quality audit system is developed, managed and maintained to company and regulatory requirements.

Establish and manage implementation of appropriate control measures/key performance indicators related to safety, compliance, and reliability.

Commercial

Set the objectives for short, medium and long-term plans to reduce Engine and APU Direct Maintenance Cost.

Develop procedures and processes for efficiency, effectiveness and compliance with applicable regulations and requirements. Initiate new procedures or revisions to existing procedures, as required.

Establish a system and oversee a team to manage Engine and APU contracts.

Lead strategic procurement activities related to Power Plants.

Prepare budget with Business Finance, be prepared to discuss it with higher management, and manage outsourced programs to ensure spend is within budget.

Define and assign key performance indicators leading to achieve company’s commercial targets.

Be part of an extraordinary story Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community.

Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before.

Together, everything is possible.

Qualifications About you

Bachelor’s degree or equivalent in Aeronautical, Mechanical, Electrical or Electronics.

Experience as a Development Engineer with the supervisory/management role.

Experience in technical management positions in Development Engineering discipline.

Master’s degree in above-mentioned fields or in Engineering Management or Business Administration.

Extreme knowledge in organizational, interpersonal, communication and negotiation skills.

Ability to work with a multinational team of professionals.

Ability to quickly identify potentially critical issues and define mitigation plans.

About Qatar Airways Group Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. Whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

Job Details

Seniority level: Mid-Senior level

Employment type: Full-time

Job function: Engineering and Information Technology

Industries: Airlines and Aviation

Referrals increase your chances of interviewing at Qatar Airways by 2x

Get notified about new Engineering Specialist jobs in Doha Metropolitan Area.

Job application

#J-18808-Ljbffr