43 Quality Control Supervisor jobs in Qatar

Job Title

Project Quality Control Supervisor

Principal Quality Operations Specialist/ Construction Quality Manager

Ras Laffan - Qatar

• Supervise Quality Control activities to determine product conformity to customer specification through effective inspection and test in accordance with the Project Quality Plan / Inspection Test Plan. Identify non conformity and take appropriate action to control / prevent them. Conduct audits as applicable to verify the product is in compliance with project requirements and procedures.
• Liaise with Production Supervisor, QC Inspectors, NDT & Certification Supervisor, Project Engineers, Principal Quality Operations Specialist, Certifying Authority, & Customer representative.

• Direct, Supervise and Participate in inspection activities to assure product quality.
• Follow quality planning for the project to assure compliance through proactive measure. Consults with the Manager Assurance and Principal Quality Ops Specialist (CQM) concerning non-conforming products and respective corrective & prevention plan.
• Initiate and involve for evaluation for non-conforming products and processes when encountered.
• Involve in preparation of project specific procedure and plans and conduct periodic walkthrough and Perform readiness review as per the readiness review plan
• Assess the manpower requirement during project execution as per schedule and the progress.
• Appraise product quality in accordance with the Project Quality Plan, Inspection & Test Plan and determine conformity and non-conformity.
• All inspection results need to be documented and if nonconformity exists required documentation shall be raised to establish corrective and preventive actions.
• Provide interpretation of applicable code specifications and customer requirements. Any deviation deemed necessary to be raised with Manager Assurance and Principal Quality Ops Specialist (CQM) to address it through approved change management process such as TQ, Concession request, Waivers etc.
• Verify Quality inspectors’ effectiveness of their ability, job knowledge, punctuality and generation of inspection report through periodic competency assessment.
• Proactive approach in prevention of a nonconformance by interface with Field Engineers and customer representative on board in conjunction with Manager Assurance / Principal Quality Ops Specialist (CQM).
• Conduct internal and external audits as applicable to assess the effectiveness of Quality System outlined in Project Quality Plan and Inspection Test Plan.
• Oversee the as-built certification as it is progressed through work approval packages and monitor progress/status of the Mechanical completion.

• Conduct project scope of work awareness.
• Conduct readiness reviews.
• Coordination with COMPANY Representatives for any technical concerns.
• Support to review Site & Technical Queries as per the Quality requirements

Education:

• Bachelor of Engineering in Mechanical or Diploma in Mechanical (3 years).
• AWS or CSWIP Qualification.
• Internal / External Auditor Qualification.

Experience:

• 8+ years Quality control or related experience in Welding Inspection.
• 3+ years directly relating to supervision.

About the Role

We are seeking an experienced Quality Control Supervisor to oversee quality operations and lead the QC team. The successful candidate will ensure that products meet the highest standards, regulatory requirements, and customer expectations, while driving continuous improvement across the organization.

Key Responsibilities

• Supervise, guide, and motivate the QC team, ensuring proper training and performance to required standards.
• Review and evaluate feedback from the Quality Manager, communicating with Inspectors and QC staff.
• Assign tasks, monitor team performance, and ensure work is completed according to plan.
• Implement strategies and processes that promote total quality management across the company.
• Coordinate and review test results for products, materials, and packaging, ensuring proper release or hold.
• Administer the "On Hold" program, including status, release, and disposal of rejected products.
• Ensure production and assembly lines comply with company standards, procedures, and legal requirements.
• Monitor adherence to the Quality Control Policy.
• Verify calibration of testing equipment, maintain calibration records, and ensure equipment is fit for use.
• Conduct product testing at different stages, checking dimensions, performance, and mechanical characteristics.
• Support customer complaint investigations with product sampling and root cause analysis.
• Maintain accurate inspection records, prepare reports, and update quality databases.
• Drive continuous improvement initiatives to enhance operations, reduce waste, and optimize efficiency.
• Ensure timely and accurate release of final products.
• Provide regular reports on quality performance, progress, and areas requiring attention.
• Take reasonable care of personal and team safety, reporting hazards promptly.
• Ensure full compliance with HSE rules for a safe and environmentally responsible workplace.
• Perform other related duties as assigned.

Core Competencies

• Leadership and team management skills.
• Strong communication and interpersonal skills.
• Analytical thinking and decision-making.
• Attention to detail and accuracy.
• Commitment to continuous improvement and quality excellence.

What We're Looking For

• Bachelor's/Diploma in Mechanical Engineering or related field.
• Minimum 5 years of relevant QC experience, including at least 2 years in a supervisory role.
• Experience in plastic pipe manufacturing preferred.
• QC certification is an advantage.
• Knowledge of QC standards, GMP, and ISO 9001/14001/45001.
• Proficiency in MS Office and ERP systems.
• Strong analytical, reporting, and problem-solving skills.

Why Join Hepworth PME?

We're innovators in piping solutions, committed to excellence, sustainability, and employee development. This is your chance to make a real impact in the manufacturing and engineering industry.

How to Apply

Submit your CV directly through Indeed. Only shortlisted candidates will be contacted.

Job Type: Full-time

Oilexec is Hiring QC with warehouse storage experience

Language : English and Arabic with data entry experience

Key Responsibilities

• Inspections and Testing: Conduct visual and measurement tests on products and materials to identify defects and ensure they meet specifications.
• Documentation: Create and maintain records of inspection results, test data, and any non-conformances.
• Product Handling: Label, weigh, measure, and count products, as well as repackage items if necessary.
• Defect Management: Segregate and report products that do not meet quality standards to the appropriate supervisors.
• Communication: Report findings to quality coordinators, supervisors, or managers and provide feedback to production teams to resolve issues.
• Safety and Compliance: Adhere to safety regulations, company policies, and legal requirements during all operations.
• Equipment Maintenance: Keep measurement and testing equipment in good working order.

Key Skills and Qualifications

• Attention to Detail: A critical skill to notice small defects or deviations from standards.
• Communication: The ability to clearly report findings and communicate with team members and supervisors.
• Problem-Solving: Aptitude for identifying the root causes of defects and contributing to solutions.
• Organizational Skills: Needed for maintaining detailed records and managing tasks effectively.
• Technical Skills: Familiarity with measuring tools, electronic inspection equipment, and relevant software is often required.
• Knowledge of Regulations: Understanding of industry-specific quality and safety standards.
• Data Entry

Job Type: Full-time

Application Question(s):

• availability to join?

Experience:

• warehousing/Storage Quality control: 3 years (Preferred)

The Quality Control Supervisor is responsible for ensuring that all products meet company quality standards and specifications. This role involves monitoring production processes, inspecting materials and finished products, and implementing quality improvement measures.

Key Responsibilities:

• Inspect raw materials, in-process items, and finished products for quality and compliance with specifications.

• Develop and implement quality control procedures and guidelines.

• Maintain accurate records of inspections, tests, and quality reports.

• Identify defects or deviations and recommend corrective actions.

• Collaborate with production teams to ensure consistent product quality.

• Train and supervise QC staff to maintain high standards.

• Ensure compliance with health, safety, and regulatory requirements.

• Participate in continuous improvement initiatives to enhance product quality.

Job Type: Contract

Contract length: 24 months

Pay: From QAR4,000.00 per month

About Us

MAT Filtration Technologies was established to provide the highest possible efficiency equipment and services on water filtration technology. Specifically MAT was established in 2012 in Izmir, Turkey and was founded by fish husbandry industry experts. Our expertise in animal husbandry for over 35 years is our biggest competitive advantage. Furthermore we understand animal behavior and we know in depth the operational needs to run properly a facility. Our company develops and tests the equipment performance and ensures its ease of operation on our marine fish quarantine facility in Izmir. In addition we have designed our organisation to deliver successfully and on-time demanding projects in any part of the world. Finally MAT has developed to become a design, manufacturing and contracting leader in the field of MEP (Mechanical, Electrical & Plumbing) and specialty filtration technologies. Currently, we employ over 300 highly-skilled staff of multiple nationalities.

We are looking for a Quality Control Engineer to work in Dubai/Um Al Quwain located of our growing company.

• Bachelor’s degree in Engineering (Preferably Mechanical Engineering)
• Minimum 3 years of working experience in the quality department,
• Knowledge of management systems such as ISO 9001, ISO 14001, ISO 45001,
• Good knowledge of problem-solving tools,
• Excellent skills in English,
• Analytical and process-oriented,
• Good knowledge of Netsis is preferred,
• Proficiency in Microsoft Office Programs.

• To control the compliance of the raw materials, materials and equipments received from the suppliers or the customers in accordance with the quality standards,
• To carry out final product tests in any supplier plants.
• To carry out raw material incoming quality control and prepare periodic reports,
• To carry out studies to improve quality and efficiency with raw material suppliers,
• To lead production process control and test management,
• To carry out final acceptance tests for final products and prepare periodic reports,
• To examine every issue that creates poor quality, to take and follow the necessary actions, to take part in cost reduction studies,
• To examine and report actual or potential nonconformities, customer complaints and to ensure that corrective/preventive actions are carried out.

Overview

QC Inspector - Electrical & Instrumentation

Location: Ras Laffan

Salary: TBD

Working Hours & Days: 10 hours, 6 days a week

Duration: 3 months, extendable

• Experience in inspection activities during procurement, fabrication, installation and hook-up, and commissioning of oil and gas production facilities projects.
• Implement QA/QC activities including those of Subcontractors Works in accordance with approved QCP/ITPs and procedures, method statements and other Contract documents.
• Prepare and sign off applicable records for quality surveillance/inspections/tests.
• Ensure availability of appropriate version of applicable Work documents such as AFC drawings, specifications and international codes and standards.
• Provide sufficient feedback to Quality Manager/Engineer on day-to-day quality issues.

• Electrical Engineering Diploma, or suitable equivalent plus Trade Certificates in Electrical and/or Instrumentation.
• Minimum 8 years of working experience as inspection personnel for Oil & Gas projects, 5 years of which must be in the onshore Gas Facilities sector, preferably in LNG.
• Familiar with electrical and instrumentation specific codes and standards (i.e., IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/IECEX-60079, etc.).
• Experience in inspection activities during procurement, fabrication, installation and hook-up, and commissioning of oil and gas production facilities projects.

• Contract

• Quality Assurance

• Oil and Gas

QC Inspector - Electrical & Instrumentation

Location : Ras Laffan

Salary : TBD

Working Hours & Days 10 hours,6 days a week

Duration :
3 months, extendable

* Electrical Engineering Diploma, or suitable equivalent plus Trade Certificates in Electrical and/ or Instrumentation.

* Minimum 8 years of working experience as inspection personnel for Oil & Gas projects, 5 years of which must be in the onshore Gas Facilities sector, preferably in LNG.

* Familiar with electrical and instrumentation specific codes and standards (i.e., IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/IECEX etc.).

Experience in inspection activities during procurement, fabrication, installation and hook-up, and commissioning of oil and gas production facilities projects.

* Implement QA/QC activities including those of Subcontractors Works in accordance with approved QCP / ITPs and procedures, method statements and other Contract documents.

* Prepares and sign off applicable records for quality surveillance / inspections / tests.

* Ensure availability of appropriate version of applicable Work documents such as AFC drawings, Specifications and international codes and standards.

Provide sufficient feedback to Quality Manager/Engineer on the day-to-day quality issues