43 Quality Inspector jobs in Qatar

Diploma in Mechanical Engineering with some experience in Steel Wire Drawing, Galvanized steel wire industry required.

Good Knowledge of ISO standards and documentation.

Ø Perform inspections of purchased parts, subassemblies or finished company products according to well defined criteria using standard physical measurements.

Ø Rework or reject subassemblies or finished products as required.

Ø Accurately document the results of the inspections and testing.

Ø Maintain all controlled document files and test records in a timely and accurate manner.

Ø Coordinate calibration of all test equipment and fixtures.

Ø Monitor critical equipment and instrumentation to ensure proper operation and calibration.

Ø Work with production management and Quality Assurance to provide feedback to Lead man.

Job Type: Full-time

Pay: QAR2, QAR3,000.00 per month

Experience:

• Quality Control: 4 years (Preferred)

Job Category: Engineering and Technical Support

Time Type: Full time

Minimum Clearance Required to Start: Secret

Employee Type: Regular-Long Term Assignment

Percentage of Travel Required: Up to 75%

Type of Travel: Outside Continental US

* * *

The Opportunity
Under the supervision of the Project Manager, the QA/QC Manager will coordinate with stakeholders and engineers to build a Quality Assurance plan, inspect work (both in-progress and after completion) to ensure that completed work complies with applicable federal, state, and local standards and regulations; record inspection results; prepare and submit inspection reports as required; and notify project managers if work is performed unsatisfactorily, or if a work environment is deemed to be unsafe.

Responsibilities

• Responsible for QA monitoring and evaluation of the various aspects of the system installation to ensure compliance with the statement of work requirements, design requirements,specification requirements, and OEM installation guidelines.
• Performs inspections and measurements, collecting and summarizing quality data, andmaintaining records on the results of sampling procedures.
• Collects information concerning the application of quality procedures, review of technical quality requirements, or the results of inspections and tests provide a basis for decisions and action by senior-level specialists and management.
• Performs on-site audits/inspections of completed work to ensure work is accomplished
• according to installation plan and specifications; reviews test and calibration procedures; and
• generates/tracks Corrective Action Reports as needed for workmanship issues requiring further
• forensics.
• Provides information for an overall assessment of the timely and proper implementation of new
• or revised work processes, use of modified or new equipment, and other controlling
• procedures.
• Ensures quality processes are developed in conjunction with the user requirements.
• Works as part of a team to establish parameters and specifications for databases.
• Tracks and maintains documentation of assigned quality projects.
• Reviews requirements, specifications, and documentation to gain a thorough understanding of
• the work to be certified.
• Raises issues, questions, and concerns; validates results, reports discrepancies, and follows
• through to ensure that all issues are resolved.

Qualifications
Required:

• Proficient with MS Office, including MS Project
• Secret clearance or eligibility to obtain clearance; US Citizen

Desired

• Basic understanding of USAF Security Forces guidelines and regulations (AFI and ESS Equipment Siting Guide)
• Certifications or experience with the Honeywell Vindicator annunciator system
• A bachelor's degree plus 3 years of specialized experience, OR;
• An associate's degree plus 7 years of specialized experience, OR;
• A major certification plus 7 years of specialized experience, OR;
• 11 years of recent specialized experience

___
What You Can Expect
A culture of integrity.
At CACI, we place character and innovation at the center of everything we do. As a valued team member, you'll be part of a high-performing group dedicated to our customer's missions and driven by a higher purpose – to ensure the safety of our nation.

An environment of trust.
CACI values the unique contributions that every employee brings to our company and our customers - every day. You'll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality.

A focus on continuous growth.
Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground — in your career and in our legacy.

Your potential is limitless.
So is ours.

Learn more about CACI here.

___
Pay Range
: There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here.

The Proposed Salary Range For This Position Is
$55,600 - $111,100

CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

A leading
LPG Bottling Plant in Qatar
is hiring for
Civil QAQC Inspector

Qualification:

• 8+ years of experience, and must be QE-approved with QE project experience
• Bachelor's degree in Engineering, Occupational Health & Safety, or a related discipline
• Strong understanding of QA/QC procedures, international standards, and inspection protocols
• Conduct inspections to ensure compliance with project specifications, standards, and codes
• Review construction activities, materials, and workmanship against approved drawings

Requirement:

• Candidates should be present in Qatar with a valid QID
• Available to join immediately
• Send us your Latest CV, Experience Certificates, etc.
• Duration - 3 months

Note:

• Applications without the above-mentioned documents will be rejected.
• Transportation provided
• All experience certificates must be attached to the CV covering 8 years of experience

QC Inspector - Electrical & Instrumentation

Location : Ras Laffan

Salary : TBD

Working Hours & Days 10 hours,6 days a week

Duration :
3 months, extendable

* Electrical Engineering Diploma, or suitable equivalent plus Trade Certificates in Electrical and/ or Instrumentation.

* Minimum 8 years of working experience as inspection personnel for Oil & Gas projects, 5 years of which must be in the onshore Gas Facilities sector, preferably in LNG.

* Familiar with electrical and instrumentation specific codes and standards (i.e., IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/IECEX etc.).

Experience in inspection activities during procurement, fabrication, installation and hook-up, and commissioning of oil and gas production facilities projects.

* Implement QA/QC activities including those of Subcontractors Works in accordance with approved QCP / ITPs and procedures, method statements and other Contract documents.

* Prepares and sign off applicable records for quality surveillance / inspections / tests.

* Ensure availability of appropriate version of applicable Work documents such as AFC drawings, Specifications and international codes and standards.

Provide sufficient feedback to Quality Manager/Engineer on the day-to-day quality issues

Position
: Quality Control Inspector - Welding

Reports To:
Project Quality Control Supervisor

Company:
Qatar Fabrication Company

Location :
Ras Laffan / Qatar

Primary Functions:

• Determine product conformity to customer specification through independent inspection and tests in accordance with the Project Quality Plan. Identify nonconformity for rectification and assure final resolution.
• Liaise with Production Supervisor, Senior Principal Certification Tech, Discipline Engineer, Project Engineer, Operations Engineer, Field Engineer, Certifying Authority, Discipline Technicians, Sr. Inspector, Customer.

Tasks and Responsibilities:

• Appraise product quality in accordance with the Project Quality Plan and Inspection & Test Plan and determine conformity and non-conformity. All inspection results need to be documented and if non conformity exists, documentation shall be raised to establish corrective action.
• Co-ordinate with Operations, Production Supervisor, Client, Job Sharing personnel and subcontractor assuring conformity to project requirements.
• Perform field inspections of fit up & welding in accordance with project requirements and scope of work as noted within the Project Quality Plan / Inspection Test Plan.
• Proactive approach in prevention of a nonconformance by interaction with respective departments
• Conduct internal audits to assess the effectiveness of Quality System outlined in Project Quality Plan / Inspection Test Plan.
• Conduct surveillance audit during execution of the project as per applicable procedures and plans.
• Perform surveillance checks on welding consumable storage and handling
• Perform surveillance checks on material storage and preservation.
• Ensure progressive completion of inspection reports and certification packages
• Coordinate closely with client inspector closely for the inspection activities as per ITP requirements
• Ensure correct documentation as per the drawings shall be updated in the database system & review appropriately prior to sign/submission
• Reports generated manually shall be maintained properly
• QRR cards shall be reviewed/monitored for its effectiveness in respective areas for ongoing activities.
• Yard initiative for the reporting of good practices, observations, concerns, etc. shall be performed as per the agreed KPIs.

Qualifications, Experience and Skills

Qualifications:

• Bachelor's Degree / Diploma in Mechanical Engineering.
• AWS or CSWIP Qualification.
• Internal /External Auditor Qualification

Experience:

5+ years Quality control or related experience in Welding Inspection.

Company Description

MACE Qatar has been a prominent player in the Qatar construction market since 2006. Specializing in Infrastructure Construction, District Cooling, Pneumatic Waste Collection, Stormwater Drainage, Foul Sewer, Potable Water, Irrigation, Street Lighting, Electrical, Energy, and Civil Works, the company has built a reputation for delivering high-quality projects. Our professional team is dedicated to meeting the growing market demands for general construction with precision and excellence.

Role Description

This is a full-time on-site role for a Quality Assurance Quality Control Engineer based in Doha, Qatar. The responsibilities include overseeing quality control activities, conducting inspections, performing quality assurance audits, and ensuring compliance with quality management standards. The engineer will work closely with construction teams to monitor the quality of work and materials used, maintain documentation, and provide feedback to enhance overall project quality.

Qualifications

• Skills in Quality Control, Quality Assurance, and Quality Auditing
• Experience in Quality Management and Inspection
• Excellent attention to detail and analytical skills
• Strong communication and documentation skills
• Ability to work collaboratively with multidisciplinary teams
• Bachelor's degree in Civil Engineering
• Professional certification in Quality Assurance/Quality Control is a plus

Role Overview:

Royal Consulting Engineers is seeking an experienced
QA/QC Engineer
to join our consultancy team for a large-scale
Ashghal project
in Qatar. The successful candidate will be responsible for implementing and maintaining quality assurance and quality control procedures to ensure all works comply with project specifications, QCS standards, and contractual requirements.

Responsibilities:

• Develop, implement, and maintain the
  Quality Management System (QMS)
  in line with project and ISO 9001:2015 requirements.
• Review and approve
  Method Statements, ITPs, Material Submittals
  , and other QA/QC documentation.
• Conduct site inspections and ensure construction activities meet approved drawings, standards, and specifications.
• Coordinate with contractors to ensure timely
  closure of NCRs, SORs, and observations
  .
• Review test reports, calibration certificates, and inspection logs for compliance.
• Participate in internal and external audits and ensure corrective actions are implemented effectively.
• Maintain proper QA/QC documentation for
  handover and project closeout
  .
• Provide technical support and quality guidance to site teams and management.
• Prepare weekly and monthly quality performance reports.

Qualifications:

• Bachelor's Degree
  in Civil Engineering or related discipline.
• Minimum 15 years of experience
  , with at least
  5 years in Qatar
  on large-scale infrastructure/building projects.
• UPDA/MME Grade A
  registration (mandatory).
• Ashghal project experience
  is essential.
• Ashghal RTM approval
  will be an added advantage.
• Strong knowledge of
  QCS, Ashghal standards, and international QA/QC practices
  .
• Proficient in MS Office, AutoCAD, and QA/QC documentation systems.
• Excellent communication, coordination, and reporting skills.

Company Description

Teyseer Laboratories is one of Qatar's trusted and accredited testing laboratories, providing comprehensive services in concrete, soil, asphalt, and material testing. We are recommended by consultants and authorities including Baladiya and deliver ISO/IEC 17025 certified services.

Responsibilities

• Implement and monitor QA/QC procedures in line with ISO/IEC 17025 and QCS standards.

• Ensure all laboratory tests (core tests, soil, concrete, asphalt, etc.) comply with international standards (ASTM, BS EN, AASHTO).

• Maintain calibration records and quality control documentation.

• Conduct internal audits and assist in external accreditation audits.

• Support continuous improvement initiatives and staff training.

• Liaise with consultants, contractors, and authorities to ensure compliance and client satisfaction.

Requirements

• Bachelor's degree in civil engineering / Materials Engineering (or related).

• 7+ years' experience in a QA/QC role within a materials testing laboratory.

• Strong knowledge of ISO/IEC 17025, ASTM, BS EN, AASHTO standards.

• Experience in preparing and reviewing test reports.

• Excellent communication skills in English (Arabic is an advantage).

• Transferable visa with NOC preferred.

Role Summary:

Ensure project quality meets/exceeds client expectations by applying international standards and quality procedures across all construction activities.

Core Responsibilities:

• Manage quality and workmanship in Civil, Architectural, Structural disciplines.
• Oversee all QA/QC documents (certificates, tests, inspections, NCRs, materials).
• Develop and enforce inspection/testing standards and maintain high-quality processes.
• Ensure all Method Statements, ITPs, Test Plans, and Drawings are approved, current, and followed on site.
• Prepare and submit Work Inspection Requests (WIRs) and ensure site items are inspected before consultant review.
• Conduct quality briefings and maintain records in monthly reports.
• Inspect incoming materials per project specs; raise NCRs for rejected items.
• Monitor testing, concrete operations, and maintain all related records and logs.
• Conduct snagging/punch lists and support HSE initiatives.

Skills & Knowledge:

• Familiar with ISO 9001, QCS, ASTM, BSI, ACI, AASHTO standards.
• Strong technical QC knowledge: ability to multitask and meet deadlines.
• Proficient in MS Office, AutoCAD, Primavera, ERP (SAP preferred).
• Ability to read and interpret drawings, specs, and data sheets.

Experience:

• Minimum 8 years overall, 5 years relevant QA/QC, 2 years GCC experience preferred.

Education & Certification:

• Bachelors in civil engineering or related.
• Professional certification (MMUP, UPDA, ISO Lead Auditor, or ASQC CQM/CQE).