44 Quality Management Systems jobs in Qatar

Quality Control & Assurance Inspector

Doha, Doha Qatar Airways

Posted today

Job Viewed

Tap Again To Close

Job Description

**About the role**

This role will be responsible to oversee the Inspection of all the uniform items inclusive of all types of garments and accessories, to ensure products supplied / received to QR and issued to all staff are as per the approved contracted reference sample, without any deviation which might reflect in a financial loss to the company.

**Key accountabilities include**:

- Ensure all Standard Operation Procedures for Quality Control and Assurance are complied with and followed in the inspection of every uniform garment and accessories inspected following the AQL standards.
- Ensure full compliance and implementation of the AQL standards whilst carrying out the inspection of garments and accessories through either visual inspection for colour / design / workmanship / packaging and / or the physical inspection of the product technical characteristics against the approved reference sample
- Ensure full adherence and implementation of the planned inspections as per the weekly / monthly Quality Control / Assurance inspection scheme. Ensure implementation of the inspection as per the Quality Control / Assurance inspection plan in all locations inclusive of main warehouses, uniform operating facilities and any other locations as required
- Ensure during inspections to always have the reference sample, invoice details, tape measure, specification, inspection form on hand and available. Ensure adherence and compliance to the reference sample maintenance SOP while conducting the inspection process taking out the sample from the sample room, handling the reference sample during inspection and returning the sample back to the sample room to ensure the integrity of the reference sample is maintained
- All findings from the inspection, quantities against size breakdown, defects, measurements and packaging are to be recorded on the inspection form
- Isolation of defective products in preparation for the imaging process to be conducted by the Quality Control / Assurance Supervisor
- Ensure accurate capturing and recording of all noted defects in the products in the Quality Control / Assurance form incompliance with the SOP
- Ensure carrying out the inspection of all the reported defective product by the staff presented to the Uniform Customer Service, assessing the defect / damage and adhering to the respective SOP
- Carryout full condition assessment, measurement and size categorization for the altered uncollected items to achieve the business objectives reducing / eliminating any financial loss to the company
- Perform other department duties related to his / her position as directed by the Head of Department.

**Be part of an extraordinary story**

Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community. Our best is here and still to come. To us, impossible is only a challenge.

Join us as we dare to achieve what’s never been done before.

**Qualifications**:
**About you**
- Has completed Vocational, Tertiary or Trade qualification.
- Has minimum of 3 years of relevant experience
- Factory/Retailer/ Brand working experience with garments and fabric/accessory product quality.
- Relevant experience in Quality Control/ Assurance processes in Factory/ Retailer and Garment industry.
- Advanced knowledge of garment measurement.
- Physically fit to be able to conduct inspection and move product cartons and package.
- Good communications skills both verbal and written.
- Strong team player.
- Strong attention to details.
- Able to work in a fast paced environment.

**About Qatar Airways Group**

Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before. So whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination.

Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.
This advertiser has chosen not to accept applicants from your region.

Quality Control Inspector Doha, Qatar

Doha, Doha ESR Healthcare

Posted 10 days ago

Job Viewed

Tap Again To Close

Job Description

Quality Control Inspector - Doha, Qatar

Description:

Note: This is a long-term contract, lasting 2 to 4 years.

Note: Due to visa restrictions, applications from nationals of Iran, Iraq, Sudan, Egypt, Israel, Congo, Afghanistan, and Libya will not be accepted. Exceptions are made if you are already a resident of Qatar with a valid QID; in such cases,

This advertiser has chosen not to accept applicants from your region.

Quality Control Materials Inspector (QFAB)

Nakilat

Posted 17 days ago

Job Viewed

Tap Again To Close

Job Description

Select how often (in days) to receive an alert: Create Alert

Quality Control Materials Inspector (QFAB)

Job Requisition No.: 21939

Category: Shipyard

Position : Quality Control Materials Inspector

Reports To: Senior Quality Inspector

Company : Qatar Fabrication Company

Location : Ras Laffan / Qatar

Primary Functions:

  • Determine conformity of material received to customer specification and relevant code/standard through independent inspection and tests in accordance with the Project Quality Plan (PQP). Identify nonconformity for

Tasks and Responsibilities:

  • Assure material received in accordance with the PO, ITP, and Technical Specification, Codes / Material standards to determine conformity. All inspection results need to be documented on warehouse checklist and if nonconformity exists, suitable documentation (OS&D, NCR) shall be issued to establish corrective and preventive action.
  • Perform receiving inspections such as visual, dimensional, verification of markings, review of Material Test Certificates / Inspection Release Notes in accordance with project specifications, codes / material standard and scope of work as noted in the PO and ITPs.
  • Provide interpretation of applicable code/material standards and customer requirements. Any deviation, clarification and waivers deemed necessary shall be notified to the Senior Quality Inspector - Materials for generating change management process such as Site Query, Technical Query, Technical deviation, waivers etc.,
  • Identify any additional testing requirement and arrange/coordinate with approved testing laboratories for testing with PMT approval. Participate in witnessing the lab testing as and when required.
  • Coordinate / Interface with Warehouse, Purchasing, PMT, Operations, Certifying Authority, Client, and subcontractor assuring conformity to project specifications.
  • Liaise with customer representatives ensuring product conformity and stage release for each activity denoted in the PO/ITP.
  • Liaise with PMT/Buyers and Expeditors for quick resolution of OS&D. Attend OS&D meetings for the assigned project.
  • Attend Joint Equipment Inspection as per project requirements.
  • Visit vendor premises and conduct vendor inspections as and when required, as per PO/ITP.
  • Exercise proactive approach in prevention of a technical problem by interaction with Purchasing, Engineers, and Management personnel.
  • Conduct routine internal audits to assess the effectiveness of quality system outlined in the PQP/ITP.
  • Participate in Toolbox Talks conducted in Warehouse to highlight the quality requirements and non- conformances noted during inspection.
  • Conduct Quality Walkthroughs to ensure proper material storage and preservation.
  • Notify all quality related concerns to the Senior Quality Inspector - Materials on regular basis.
  • Liaise with Buyers to ensure Mill authenticity of materials received from Stockiest.
  • Carry out advance MTC review (Supplier Materials Details) of stockiest materials to avoid OS&Ds after material receiving.

Qualifications, Experience and Skills

Qualifications:

  • Bachelor’s Degree / Diploma in Mechanical / Metallurgical/ Electrical & Instrumentation

Experience:

  • 5+ years Quality control or related experience in Weld, Material, E&I Inspection.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.

Quality Control Materials Inspector (QFAB)

Doha, Doha Nakilat

Posted 2 days ago

Job Viewed

Tap Again To Close

Job Description

Select how often (in days) to receive an alert: Create Alert Quality Control Materials Inspector (QFAB)

Job Requisition No.: 21939 Category: Shipyard Position : Quality Control Materials Inspector Reports To:

Senior Quality Inspector Company : Qatar Fabrication Company Location

: Ras Laffan / Qatar Primary Functions: Determine conformity of material received to customer specification and relevant code/standard through independent inspection and tests in accordance with the Project Quality Plan (PQP). Identify nonconformity for Tasks and Responsibilities: Assure material received in accordance with the PO, ITP, and Technical Specification, Codes / Material standards to determine conformity. All inspection results need to be documented on warehouse checklist and if nonconformity exists, suitable documentation (OS&D, NCR) shall be issued to establish corrective and preventive action. Perform receiving inspections such as visual, dimensional, verification of markings, review of Material Test Certificates / Inspection Release Notes in accordance with project specifications, codes / material standard and scope of work as noted in the PO and ITPs. Provide interpretation of applicable code/material standards and customer requirements. Any deviation, clarification and waivers deemed necessary shall be notified to the Senior Quality Inspector - Materials for generating change management process such as Site Query, Technical Query, Technical deviation, waivers etc., Identify any additional testing requirement and arrange/coordinate with approved testing laboratories for testing with PMT approval. Participate in witnessing the lab testing as and when required. Coordinate / Interface with Warehouse, Purchasing, PMT, Operations, Certifying Authority, Client, and subcontractor assuring conformity to project specifications. Liaise with customer representatives ensuring product conformity and stage release for each activity denoted in the PO/ITP. Liaise with PMT/Buyers and Expeditors for quick resolution of OS&D. Attend OS&D meetings for the assigned project. Attend Joint Equipment Inspection as per project requirements. Visit vendor premises and conduct vendor inspections as and when required, as per PO/ITP. Exercise proactive approach in prevention of a technical problem by interaction with Purchasing, Engineers, and Management personnel. Conduct routine internal audits to assess the effectiveness of quality system outlined in the PQP/ITP. Participate in Toolbox Talks conducted in Warehouse to highlight the quality requirements and non- conformances noted during inspection. Conduct Quality Walkthroughs to ensure proper material storage and preservation. Notify all quality related concerns to the Senior Quality Inspector - Materials on regular basis. Liaise with Buyers to ensure Mill authenticity of materials received from Stockiest. Carry out advance MTC review (Supplier Materials Details) of stockiest materials to avoid OS&Ds after material receiving. Qualifications, Experience and Skills Qualifications: Bachelor’s Degree / Diploma in Mechanical / Metallurgical/ Electrical & Instrumentation Experience: 5+ years Quality control or related experience in Weld, Material, E&I Inspection.

#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.

Quality Control Inspector Doha, Qatar

Doha, Doha ESR Healthcare

Posted 9 days ago

Job Viewed

Tap Again To Close

Job Description

Quality Control Inspector - Doha, Qatar

Description: Note: This is a long-term contract, lasting 2 to 4 years. Note: Due to visa restrictions, applications from nationals of Iran, Iraq, Sudan, Egypt, Israel, Congo, Afghanistan, and Libya will not be accepted. Exceptions are made if you are already a resident of Qatar with a valid QID; in such cases,
This advertiser has chosen not to accept applicants from your region.

Product Development & Quality Control Manager - Discover Qatar

Doha, Doha Stryker Corporation

Posted 4 days ago

Job Viewed

Tap Again To Close

Job Description

About the role

To support the Line Manager in developing new DQ (Discover Qatar) products, focusing on DQ-owned (created) products. Responsible for product design, pricing, commercialization, staff training, SOPs (with operations team), and enhancements.

Key Accountabilities include:

  1. Support the Line Manager with innovative ideas to develop excursion and tour packages in and around Qatar.
  2. Create products and services aligned with marketing strategy, target customer groups, and key markets of Qatar Airways network.
  3. Review current products, analyze needs, and recommend improvements based on specifications and market trends.
  4. Manage project plans for developing new tours and excursions, including site inspections and feedback monitoring.
  5. Develop DQ product portfolio addressing customer and channel needs, manage budgets, and prepare financial reports.
  6. Determine product pricing using market research and cost analysis.
  7. Evaluate product development feedback, test products/services, and ensure continuous improvement.
  8. Research competitors' products and oversee development based on industry best practices.
  9. Perform other duties as directed by the Head of Department.

Join us in an extraordinary story where your skills, imagination, and ambition can make a global impact. We offer growth opportunities and the chance to work on rewarding challenges. Be part of our future and build the life you want in an international community. To us, the impossible is only a challenge.

Qualifications

About you

  • Bachelor's degree or equivalent required.
  • 7+ years of relevant experience.
  • Experience in product development, negotiation, and contracting at a managerial level in large wholesale tour operations.
  • Excellent negotiation and contracting skills.
  • Deep understanding of international tour operations.
  • Regional/product knowledge of Qatar and GCC.
  • Understanding of margins and profits in wholesale tour operations.
  • High computer literacy.
  • Knowledge of the international Tour Operator model, including online distribution.
  • Excellent English communication skills.

About Qatar Airways Group

Our story began with four aircraft. Today, we operate across 12 businesses, delivering excellence. We grow fast, innovate, and aim to achieve what has never been done before. Join us to bring your ideas and passion to a global community.

#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.

Product Development & Quality Control Manager - Discover Qatar

Doha, Doha Stryker Corporation

Posted 4 days ago

Job Viewed

Tap Again To Close

Job Description

About the role To support the Line Manager in developing new DQ (Discover Qatar) products, focusing on DQ-owned (created) products. Responsible for product design, pricing, commercialization, staff training, SOPs (with operations team), and enhancements. Key Accountabilities include: Support the Line Manager with innovative ideas to develop excursion and tour packages in and around Qatar. Create products and services aligned with marketing strategy, target customer groups, and key markets of Qatar Airways network. Review current products, analyze needs, and recommend improvements based on specifications and market trends. Manage project plans for developing new tours and excursions, including site inspections and feedback monitoring. Develop DQ product portfolio addressing customer and channel needs, manage budgets, and prepare financial reports. Determine product pricing using market research and cost analysis. Evaluate product development feedback, test products/services, and ensure continuous improvement. Research competitors' products and oversee development based on industry best practices. Perform other duties as directed by the Head of Department. Join us in an extraordinary story where your skills, imagination, and ambition can make a global impact. We offer growth opportunities and the chance to work on rewarding challenges. Be part of our future and build the life you want in an international community. To us, the impossible is only a challenge. Qualifications About you Bachelor's degree or equivalent required. 7+ years of relevant experience. Experience in product development, negotiation, and contracting at a managerial level in large wholesale tour operations. Excellent negotiation and contracting skills. Deep understanding of international tour operations. Regional/product knowledge of Qatar and GCC. Understanding of margins and profits in wholesale tour operations. High computer literacy. Knowledge of the international Tour Operator model, including online distribution. Excellent English communication skills. About Qatar Airways Group Our story began with four aircraft. Today, we operate across 12 businesses, delivering excellence. We grow fast, innovate, and aim to achieve what has never been done before. Join us to bring your ideas and passion to a global community.

#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
Be The First To Know

About the latest Quality management systems Jobs in Qatar !

Quality Control Inspector - Civil with Mme Roads

Doha, Doha CHINA RAILWAY CONSTRUCTION CORPORATION LIMITED - QATAR BRANCH

Posted today

Job Viewed

Tap Again To Close

Job Description

**Quality Control Inspector - Civil**
- The role requires _**significant leadership experience**_ _and _**people management skills, **_which have been developed in the _**road operations and maintenance services sector, **_with particular emphasis on health, safety, quality, and operational delivery._
- Must be having an experience in ASHGHAL roads projects experience in roads project in Qatar.
- Bachelor’s Degree in Engineering - Civil
- Must have MME/MMUP
- 7-10 years of professional experience with reputed Companies in the Construction Industry.

**RESPONSIBILITIES**
- Executes the specific inspections on materials, equipment, and construction/installation activities on site.
- Issues the relevant INR Quality Records and, when necessary, writes and sends them to QA QC Engineer nonconformance reports (NCR)
- Checks the preparation of foundations.
- Checks the correct preparation of reinforcements.
- Checks the certifications regarding element mixes. LASTM test, chemical analysis, grain size analysis.
- Monitors atmospheric conditions during pouring operations.
- Monitors correct curing operations.
- Checks the sampling operations (when required).
- Reviews the laboratory examination results.
- Checks sub-grade dry density.
- Checks moisture content.
- Checks compression strength test.
- Checks after execution of costing.
- Checks after concrete puring.
- Checks materials quality (wire, fitting etc.).
- Verifies special processes and the relevant workers’ qualifications.
- Orderly collect, check and manage documents certifying tests, controls and inspections carried out witnessing the tests, controls and inspections carried out.
- Check the conformity with the Quality Control Plan and obtain the relevant documentation.
- Check the documents certifying the tests, controls and inspections carried out.
- Ensure the correct implementation of the approved Inspection Test Plan according to Clients requirements.

**Job Types**: Contract, Permanent
Contract length: 36 months

Application Question(s):

- Your CURRENT COMPANY (CONTRACTOR)
- Your CURRENT SALARY in WPS
- Your SALARY EXPECTATIONS IN THE FULL PACKAGE

**Education**:

- Bachelor's (preferred)

**Experience**:

- PWA ROADS PROJECTS under CONTRACTORS: 7 years (preferred)
- QC INSPECTOR - CIVIL: 7 years (preferred)

License/Certification:

- MME/MMUP/UPDA (preferred)
- LICENSED CIVIL ENGINEER (preferred)
This advertiser has chosen not to accept applicants from your region.

Quality Assurance senior Quality Assurance Engineer

Doha, Doha Qatar Airways

Posted today

Job Viewed

Tap Again To Close

Job Description

About the role

We are recruiting for Senior Quality Assurance Engineer to be based in Doha, Qatar.

Senior Quality Assurance Engineer will ensure that constant maintenance standards applied to QTR and Customer aircraft are satisfied to the requirements to QCAR Parts 145, M and 147 and EASA Parts 145 and 147. To supervise as a part of Audit or Investigation team and ensure objective of assigned task are met.

Specific responsibilities of the role include:
Operational

Carry out planned and ad-hoc quality surveillance, audits individually or in a lead role when working in a team to identify and record any finding; initiate/recommend solutions and report audit result to the Manager Quality System as part of ongoing Quality Assurance Program.

Follow up and verify the implementation of corrective action within specified timescales to ensure company’s product and performance meet acceptable standards and make recommendation as necessary.

Review regulatory changes and update keeping current company technical procedures and manuals (MOE, TPM, ASL, LSM, CAME, MTOE, RAC & Capability register etc.) to maintain quality standards to acceptable levels. For this purpose SQAE will liaison with Regulatory Authorities or external parties in coordination with Manager Quality System.

Be involved in preparation of Quality notices and Quality leaflets and review such documentation if prepared by other Quality Assurance Engineer.

Control and maintain company authorization system for authorization approvals to provide staff appropriately qualified and trained as required by QCAR/EASA & Customers regulations. SQAE will from time to time be required to review, assess and advise Manager Quality System on authorisation related queries/issues.

Participate in Assessment Boards (technical, procedures, and practical) for the purpose of granting/extending/renewing Qatar Airways authorisations for certifying staff, support staff and non-Aircraft Authorised staff.

Be involved in review of occurrence reports generated from within technical or externally assigned to technical to ensure they are investigated to find the root cause and related recommendation are addressed to mitigate re-occurrence. When part of an investigation team, SQAE will be required to lead the team.

Carry out extension of Airworthiness Review Certificate of Qatar Airways operated aircrafts as per authorization

Attend meetings as directed by Manager Quality System to delegate Quality Assurance Section.

Review technical quality related other sections/department or companies queries and report recommendations to the Manager Quality System.

Communicate effectively with internal and external customers. Ensure quality related matters and airworthiness concerns are actioned accordingly to QR standards.

Stand in on behalf of Manager Quality System for the purpose of conducting operational meetings or facilitating the same in Manager’s absence.

Perform other department duties related to his/her position as directed by the Head of the Department

Be part of an extraordinary story
Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community.
Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before.
Together, everything is possible

About you

Qualifications and Experience:
Degree (B. Eng., BSc in Mechanical, Electrical, Electronics, Mechatronics or Aeronautical Engineering) or Diploma in Aircraft Maintenance Engineering with ICAO type II license.

Quality audit training

QCAA / EASA Part 145, M, & 147 training

Completed the Management training and assigned role specific technical courses

Received training on at least 2 aircraft types operated by Qatar Airways.

**Experience**:
External: 11 years of job related experience in Quality Assurance / maintenance / continued airworthiness environment / quality auditing

Must be assessed for leadership skills.

Minimum 3 years as an internal /certified auditor

11 years of experience in Quality Assurance.

Detailed knowledge of air legislation, particularly ICAO, QCAA, EASA & FAA Regulations

Detailed Knowledge of Quality & Safety systems, continued airworthiness and aircraft maintenance fundamentals.

Problem Solving abilities with analytical skills

Good English communication skills both written and verbal

Conversant with use of computers and AirNav & My Boeing Fleet.

About Qatar Airways Group

Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of fai
This advertiser has chosen not to accept applicants from your region.

Quality Assurance quality Assurance Engineer Level 2

Doha, Doha Qatar Airways

Posted today

Job Viewed

Tap Again To Close

Job Description

About the role

We are recruiting for Quality Assurance Engineer Level 2 to be based in Doha, Qatar.

Quality Assurance Engineer Level 2 is responsible to ensure that constant maintenance standards applied to QTR and Customer aircraft are satisfied to the requirements to QCAR Parts 145, M and 147 and EASA Parts 145 and 147.

Specific responsibilities of the role include:
Operational

Carry out planned and ad-hoc quality surveillance, audits independently when performing such tasks individually or under Senior Quality Assurance Engineer when part of team to identify and record any finding; initiate/recommend solutions and report audit result to the Manager Quality System via SQAE as part of ongoing Quality Assurance Program.

Follow up and verify the implementation of corrective action within specified timescales to ensure company’s product and performance meet acceptable standards and make recommendation as necessary.

Review regulatory changes and update keeping current company technical procedures and manuals (MOE, TPM, ASL, LSM, CAME, MTOE, RAC & Capability register) in consultation of Senior Quality Assurance Engineer to maintain quality standards to acceptable levels.

Be involved in preparation of Quality notices and Quality leaflets.

Update and maintain company authorization system for authorization approvals to provide staff appropriately qualified and trained as required by QCAR/EASA & Customers regulations.

Participate in the Assessment Boards (technical, procedures, and practical) for the purpose of granting/extending/renewing Qatar Airways authorisations for certifying staff, support staff and non-Aircraft Authorised staff.

Be involved in review of occurrence reports generated from within technical or externally assigned to technical to ensure they are investigated to find the root cause and related recommendation are addressed to mitigate re-occurrence.

Carry out extension of Airworthiness Review Certificate of Qatar Airways operated aircrafts as per authorization

Attend meetings as directed by Manager Quality System to delegate Quality Assurance Section.

Review technical quality related other sections/department or companies queries and report recommendations to the Manager Quality System.

Communicate effectively with internal and external customers in consultation with Senior Quality Assurance Engineer when required. Ensure quality related matters and airworthiness concerns are actioned accordingly to QR standards.

Perform other department duties related to his/her position as directed by the Head of the Department.

Be part of an extraordinary story
Your skills. Your imagination. Your ambition. Here, there are no boundaries to your potential and the impact you can make. You’ll find infinite opportunities to grow and work on the biggest, most rewarding challenges that will build your skills and experience. You have the chance to be a part of our future, and build the life you want while being part of an international community.
Our best is here and still to come. To us, impossible is only a challenge. Join us as we dare to achieve what’s never been done before.
Together, everything is possible

About you

Qualifications and Experience:
Degree (B. Eng., BSc in Mechanical, Electrical, Electronics, Mechatronics or Aeronautical Engineering), or Diploma in Aircraft Maintenance Engineering with ICAO type II license.

QCAA / EASA Part 145, M, & 147 training.

Quality audit training.

Received training on at least 2 aircraft types operated by Qatar Airways

Previous Experience:
External: 9 years of job related experience in Quality Assurance / maintenance / continued airworthiness environment / quality auditing

Minimum 2 years as an internal /certified auditor.

9 years’ experience in the Quality Assurance.

Job Specific Skills:
Detailed knowledge of air legislation, particularly ICAO, QCAA, EASA & FAA Regulations

Detailed Knowledge of Quality & Safety systems, continued airworthiness and aircraft maintenance fundamentals.

Problem solving abilities with analytical skills.

Good English communication skills both written and verbal.

Conversant with use of computers and AirNav & My Boeing Fleet.

About Qatar Airways Group

Our story started with four aircraft. Today, we deliver excellence across 12 different businesses coming together as one. We’ve grown fast, broken records and set trends that others follow. We don’t slow down by the fear of failure. Instead, we dare to achieve what’s never been done before.
So whether you’re creating a unique experience for our customers or innovating behind the scenes, every person contributes to our proud story. A story of spectacular growth and determination. Now is the time to bring your best ideas and passion to a place where your ambition will know no boundaries, and be part of a truly global community.

How to apply
This advertiser has chosen not to accept applicants from your region.
 

Nearby Locations

Other Jobs Near Me

Industry

  1. request_quote Accounting
  2. work Administrative
  3. eco Agriculture Forestry
  4. smart_toy AI & Emerging Technologies
  5. school Apprenticeships & Trainee
  6. apartment Architecture
  7. palette Arts & Entertainment
  8. directions_car Automotive
  9. flight_takeoff Aviation
  10. account_balance Banking & Finance
  11. local_florist Beauty & Wellness
  12. restaurant Catering
  13. volunteer_activism Charity & Voluntary
  14. science Chemical Engineering
  15. child_friendly Childcare
  16. foundation Civil Engineering
  17. clean_hands Cleaning & Sanitation
  18. diversity_3 Community & Social Care
  19. construction Construction
  20. brush Creative & Digital
  21. currency_bitcoin Crypto & Blockchain
  22. support_agent Customer Service & Helpdesk
  23. medical_services Dental
  24. medical_services Driving & Transport
  25. medical_services E Commerce & Social Media
  26. school Education & Teaching
  27. electrical_services Electrical Engineering
  28. bolt Energy
  29. local_mall Fmcg
  30. gavel Government & Non Profit
  31. emoji_events Graduate
  32. health_and_safety Healthcare
  33. beach_access Hospitality & Tourism
  34. groups Human Resources
  35. precision_manufacturing Industrial Engineering
  36. security Information Security
  37. handyman Installation & Maintenance
  38. policy Insurance
  39. code IT & Software
  40. gavel Legal
  41. sports_soccer Leisure & Sports
  42. inventory_2 Logistics & Warehousing
  43. supervisor_account Management
  44. supervisor_account Management Consultancy
  45. supervisor_account Manufacturing & Production
  46. campaign Marketing
  47. build Mechanical Engineering
  48. perm_media Media & PR
  49. local_hospital Medical
  50. local_hospital Military & Public Safety
  51. local_hospital Mining
  52. medical_services Nursing
  53. local_gas_station Oil & Gas
  54. biotech Pharmaceutical
  55. checklist_rtl Project Management
  56. shopping_bag Purchasing
  57. home_work Real Estate
  58. person_search Recruitment Consultancy
  59. store Retail
  60. point_of_sale Sales
  61. science Scientific Research & Development
  62. wifi Telecoms
  63. psychology Therapy
  64. pets Veterinary
View All Quality Management Systems Jobs