82 Quality Supervisor jobs in Qatar

Overview

Job Title : Project Quality Control Supervisor

Reports To : Principal Quality Operations Specialist / Construction Quality Manager

Job Location : Ras Laffan -Qatar

• Supervise Quality Control activities to determine product conformity to customer specification through effective inspection and test in accordance with the Project Quality Plan / Inspection Test Plan. Identify non conformity and take appropriate action to control / prevent them. Conducts audits as applicable to verify the product is in compliance with project requirements and procedures.
• Liaise with Production Supervisor, QC Inspectors, NDT & Certification Supervisor, Project Engineers, Principal Quality Operations Specialist, Certifying Authority, & Customer representative.

• Direct, Supervise and Participate in inspection activities to assure product quality.
• Follow quality planning for the project to assure compliance through proactive measure. Consults with the Manager Assurance and Principal Quality Ops Specialist (CQM) concerning non-conforming products and respective corrective & prevention plan.
• Initiate and involve for evaluation for non-conforming products and processes when encountered.
• Involve in preparation of project specific procedure and plans and conduct periodic walkthrough and Perform readiness review as per the readiness review plan
• Asses the manpower requirement during project execution as per schedule and the progress.
• Appraise product quality in accordance with the Project Quality Plan, Inspection & Test Plan and determine conformity and non-conformity.
• All inspection results need to be documented and if nonconformity exists required documentation shall be raised to establish corrective and preventive actions.
• Provide interpretation of applicable code specifications and customer requirements. Any deviation deemed necessary to be raised with Manager Assurance and Principal Quality Ops Specialist (CQM) to address it through approved change management process such as TQ, Concession request, Waivers etc.
• Verify Quality inspectors’ effectiveness of their ability, job knowledge, punctuality and generation of inspection report through periodic competency assessment.
• Proactive approach in prevention of a nonconformance by interface with Field Engineers and customer representative on board in conjunction with Manager Assurance / Principal Quality Ops Specialist (CQM).
• Conduct internal and external audits as applicable to assess the effectiveness of Quality System outlined in Project Quality Plan and Inspection Test Plan.
• Oversee the as-built certification as it is progressed through work approval packages and monitor progress / status of the Mechanical completion.

• Conduct project scope of work awareness.
• Conduct readiness reviews.
• Coordination with COMPANY Representatives for any technical concerns.
• Support to review Site & Technical Queries as per the Quality requirements

Education :

• Bachelor of Engineering in Mechanical or Diploma in Mechanical (3 years).
• AWS or CSWIP Qualification.
• Internal / External Auditor Qualification.

Experience :

• 8+ years Quality control or related experience in Welding Inspection.
• 3+ years directly relating to supervision.

WHO ARE WE? At Nexans, our global vision is to electrify the future. Within the Group, this means innovating beyond cable to bring differentiation and added value to our customers, through innovative services and solutions. With nearly 28,000 employees in 42 countries, the Group is leading the charge towards the new world of electrification: safer, more sustainable, renewable, decarbonized and accessible to all.Our 'Distribution & Uses' business group stands for reliable cabling systems and smart energy solutions, including electrical accessories, to make buildings and power grids more efficient, people-oriented and sustainable.

WELCOME YOU TO THE TEAM

Our story begins in 2008, as a Joint Venture company between Nexans and Al Mirqab Capital and is fully managed by Nexans. We have been involved in many of the country's most ambitious projects, such as Kahramaa, Qatar Rail, Qatar Petroleum, Qatar Foundation, and many others. The plant is among the most advanced Nexans factories in the MENA (Middle-East North Africa) region. Being the worldwide leader in cabling solutions, Nexans has transferred its technology to QICC, which is extremely proud to contribute to the rapid development of Qatar economy aligned with Qatar National Vision 2030.

In order to support the development and operations of the plant, we wish to fill a position of Production Supervisor , Production department.

Location: Mesaieed Industrial Area, Qatar

Reports To: Foreman

• Lead and mentor the team operating wire-drawing, stranding, and rewinding machines within the Metallurgy Scope Section. Ensure high-quality outputs from each machine by monitoring processes and enforcing production and safety standards.

• Manage daily team operations: guide operators, oversee raw materials, tooling, tools & tackles, and consumables in line with company and safety standards.

• Ensure machine operation adheres to work instructions and quality parameters for wire drawing, stranding, and rewinding.

• Coordinate production plans based on schedules from the planning department.

• Authorize production by verifying tooling, sampling machine output, evaluating control charts, and confirming proper identification tagging.

• Monitor & validate operator-recorded production, quality, and process data; take corrective actions for non-conforming products and escalate issues to Foreman.

• Oversee tooling logistics: ensure dies, tips, and marking segments are properly handled in coordination with the Die Shop.

• Drive continuous improvement : propose productivity and quality enhancements.

• Report raw-material or process issues, environmental concerns, and improvement opportunities to Foreman.

• Ensure environmental compliance , including segregation of hazardous and non hazardous waste.

• Promote safety culture : enforce machine safety protocols, assist in incident analysis alongside safety officers.

• Coordinate with maintenance for machine breakdowns and preventive maintenance.

• Support logistics in managing raw materials and in-process semi-finished stocks.

• Train new operators on safe and efficient machine operation, including special processes like welding, crimping, etc.

• Certified from an Industrial Training Institute (after Secondary School or Pre-Degree).

• 8-10 years of experience as a Senior Operator on wire drawing and stranding machines.

• Production planning and monitoring

• Problem-solving & continuous improvement

• Key performance indicator (KPI) deployment & tracking

• Team leadership and management

• Strong collaboration & communication skills

• Deep operational knowledge of wire drawing, stranding, and rewinding equipment and principles.

• Strong leadership and training capabilities.

• Good command of English (spoken and written).

Overview

WHO ARE WE? At Nexans, our global vision is to electrify the future. Within the Group, this means innovating beyond cable to bring differentiation and added value to our customers, through innovative services and solutions. With nearly 28,000 employees in 42 countries, the Group is leading the charge towards the new world of electrification: safer, more sustainable, renewable, decarbonized and accessible to all.Our 'Distribution & Uses' business group stands for reliable cabling systems and smart energy solutions, including electrical accessories, to make buildings and power grids more efficient, people-oriented and sustainable.

WELCOME YOU TO THE TEAM

Our story begins in 2008, as a Joint Venture company between Nexans and Al Mirqab Capital and is fully managed by Nexans. We have been involved in many of the country's most ambitious projects, such as Kahramaa, Qatar Rail, Qatar Petroleum, Qatar Foundation, and many others. The plant is among the most advanced Nexans factories in the MENA (Middle-East North Africa) region. Being the worldwide leader in cabling solutions, Nexans has transferred its technology to QICC, which is extremely proud to contribute to the rapid development of Qatar economy aligned with Qatar National Vision 2030.

In order to support the development and operations of the plant, we wish to fill a position of Production Supervisor , Production department.

Location: Mesaieed Industrial Area, Qatar

Reports To: Foreman

• Lead and mentor the team operating wire-drawing, stranding, and rewinding machines within the Metallurgy Scope Section. Ensure high-quality outputs from each machine by monitoring processes and enforcing production and safety standards.

• Manage daily team operations: guide operators, oversee raw materials, tooling, tools & tackles, and consumables in line with company and safety standards.

• Ensure machine operation adheres to work instructions and quality parameters for wire drawing, stranding, and rewinding.

• Coordinate production plans based on schedules from the planning department.

• Authorize production by verifying tooling, sampling machine output, evaluating control charts, and confirming proper identification tagging.

• Monitor & validate operator-recorded production, quality, and process data; take corrective actions for non-conforming products and escalate issues to Foreman.

• Oversee tooling logistics: ensure dies, tips, and marking segments are properly handled in coordination with the Die Shop.

• Drive continuous improvement : propose productivity and quality enhancements.

• Report raw-material or process issues, environmental concerns, and improvement opportunities to Foreman.

• Ensure environmental compliance , including segregation of hazardous and non‑hazardous waste.

• Promote safety culture : enforce machine safety protocols, assist in incident analysis alongside safety officers.

• Coordinate with maintenance for machine breakdowns and preventive maintenance.

• Support logistics in managing raw materials and in-process semi-finished stocks.

• Train new operators on safe and efficient machine operation, including special processes like welding, crimping, etc.

• Certified from an Industrial Training Institute (after Secondary School or Pre-Degree).

• 8–10 years of experience as a Senior Operator on wire drawing and stranding machines.

• Production planning and monitoring

• Problem-solving & continuous improvement

• Key performance indicator (KPI) deployment & tracking

• Team leadership and management

• Strong collaboration & communication skills

• Deep operational knowledge of wire drawing, stranding, and rewinding equipment and principles.

• Strong leadership and training capabilities.

• Good command of English (spoken and written).

Job Title

Project Quality Control Supervisor

Principal Quality Operations Specialist/ Construction Quality Manager

Ras Laffan - Qatar

• Supervise Quality Control activities to determine product conformity to customer specification through effective inspection and test in accordance with the Project Quality Plan / Inspection Test Plan. Identify non conformity and take appropriate action to control / prevent them. Conduct audits as applicable to verify the product is in compliance with project requirements and procedures.
• Liaise with Production Supervisor, QC Inspectors, NDT & Certification Supervisor, Project Engineers, Principal Quality Operations Specialist, Certifying Authority, & Customer representative.

• Direct, Supervise and Participate in inspection activities to assure product quality.
• Follow quality planning for the project to assure compliance through proactive measure. Consults with the Manager Assurance and Principal Quality Ops Specialist (CQM) concerning non-conforming products and respective corrective & prevention plan.
• Initiate and involve for evaluation for non-conforming products and processes when encountered.
• Involve in preparation of project specific procedure and plans and conduct periodic walkthrough and Perform readiness review as per the readiness review plan
• Assess the manpower requirement during project execution as per schedule and the progress.
• Appraise product quality in accordance with the Project Quality Plan, Inspection & Test Plan and determine conformity and non-conformity.
• All inspection results need to be documented and if nonconformity exists required documentation shall be raised to establish corrective and preventive actions.
• Provide interpretation of applicable code specifications and customer requirements. Any deviation deemed necessary to be raised with Manager Assurance and Principal Quality Ops Specialist (CQM) to address it through approved change management process such as TQ, Concession request, Waivers etc.
• Verify Quality inspectors’ effectiveness of their ability, job knowledge, punctuality and generation of inspection report through periodic competency assessment.
• Proactive approach in prevention of a nonconformance by interface with Field Engineers and customer representative on board in conjunction with Manager Assurance / Principal Quality Ops Specialist (CQM).
• Conduct internal and external audits as applicable to assess the effectiveness of Quality System outlined in Project Quality Plan and Inspection Test Plan.
• Oversee the as-built certification as it is progressed through work approval packages and monitor progress/status of the Mechanical completion.

• Conduct project scope of work awareness.
• Conduct readiness reviews.
• Coordination with COMPANY Representatives for any technical concerns.
• Support to review Site & Technical Queries as per the Quality requirements

Education:

• Bachelor of Engineering in Mechanical or Diploma in Mechanical (3 years).
• AWS or CSWIP Qualification.
• Internal / External Auditor Qualification.

Experience:

• 8+ years Quality control or related experience in Welding Inspection.
• 3+ years directly relating to supervision.

1. Set daily/weekly/monthly objectives and communicate them to employees
2. Organize workflow by assigning responsibilities and preparing schedules
3. Allocate manpower assignment and relevant instructions
4. Ensure that work instructions are properly executed and that workers follow the correct production methods
5. Supervise the storage of produced materials at the factory
6. Ensure and supervise the safe operation of printing press machinery and equipment & schedule regular maintenance
7. Oversee and coach employees
8. Check production output according to specifications
9. Submit reports on performance and progress to management
10. Identify issues in efficiency and suggest improvements in report form to the management
11. Train new employees on how to safely use machinery and follow procedures
12. Enforce strict safety guidelines and company standards
13. Recognize possible print issues and plan layouts accordingly in discussion with head of production
14. Apply strict guidelines for Quality Assurance to ensure the best possible product for clientele
15. Examining finished samples and approving quality before delivery to client
16. Monitor the quality of the product and ensure deadlines are met
17. Organize, Control and Monitor Production Area
18. Identifying and selecting appropriate options for binding, inks, paper, varnishes, and special printing processes
19. Ensure that a quality standards plan is created and enforced.

1. Bachelor's degree from an accredited Three-year college or university in any subject
2. Minimum of 5 year experience of which 3 in printing press field
3. Basic Safety Training, Related Production training, Effective Planning training, etc
4. Possesses strong negotiation skills
5. Has excellent verbal communications skills
6. Strong analytical, organizational, and communication skills
7. Detail-oriented, possessing excellent ability to work independently as needed
8. Strong interpersonal skills
9. Strong command of English and working knowledge of the Arabic language

• Set daily/weekly/monthly objectives and communicate them to employees
• Organize workflow by assigning responsibilities and preparing schedules
• Allocate manpower assignment and relevant instructions
• Ensure that work instructions are properly executed and that workers follow the correct production methods
• Supervise the storage of produced materials at the factory
• Ensure and supervise the safe operation of printing press machinery and equipment & schedule regular maintenance
• Oversee and coach employees
• Check production output according to specifications
• Submit reports on performance and progress to management
• Identify issues in efficiency and suggest improvements in report form to the management
• Train new employees on how to safely use machinery and follow procedures
• Enforce strict safety guidelines and company standards
• Recognize possible print issues and plan layouts accordingly in discussion with head of production
• Apply strict guidelines for Quality Assurance to ensure the best possible product for clientele
• Examining finished samples and approving quality before delivery to client
• Monitor the quality of the product and ensure deadlines are met
• Organize, Control and Monitor Production Area
• Identifying and selecting appropriate options for binding, inks, paper, varnishes, and special printing processes
• Ensure that a quality standards plan is created and enforced.

• Bachelor's degree from an accredited Three-year college or university in any subject
• Minimum of 5 year experience of which 3 in printing press field
• Basic Safety Training, Related Production training, Effective Planning training, etc
• Possesses strong negotiation skills
• Has excellent verbal communications skills
• Strong analytical, organizational, and communication skills
• Detail-oriented, possessing excellent ability to work independently as needed
• Strong interpersonal skills
• Strong command of English and working knowledge of the Arabic language

Duties & Responsibilities

1. Set daily/weekly/monthly objectives and communicate them to employees
2. Organize workflow by assigning responsibilities and preparing schedules
3. Allocate manpower assignment and relevant instructions
4. Ensure that work instructions are properly executed and that workers follow the correct production methods
5. Supervise the storage of produced materials at the factory
6. Ensure and supervise the safe operation of printing press machinery and equipment & schedule regular maintenance
7. Oversee and coach employees
8. Check production output according to specifications
9. Submit reports on performance and progress to management
10. Identify issues in efficiency and suggest improvements in report form to the management
11. Train new employees on how to safely use machinery and follow procedures
12. Enforce strict safety guidelines and company standards
13. Recognize possible print issues and plan layouts accordingly in discussion with head of production
14. Apply strict guidelines for Quality Assurance to ensure the best possible product for clientele
15. Examining finished samples and approving quality before delivery to client
16. Monitor the quality of the product and ensure deadlines are met
17. Organize, Control and Monitor Production Area
18. Identifying and selecting appropriate options for binding, inks, paper, varnishes, and special printing processes
19. Ensure that a quality standards plan is created and enforced.

1. Bachelor’s degree from an accredited Three-year college or university in any subject
2. Minimum of 5 year experience of which 3 in printing press field
3. Basic Safety Training, Related Production training, Effective Planning training, etc
4. Possesses strong negotiation skills
5. Has excellent verbal communications skills
6. Strong analytical, organizational, and communication skills
7. Detail-oriented, possessing excellent ability to work independently as needed
8. Strong interpersonal skills
9. Strong command of English and working knowledge of the Arabic language