98 Sr Engineer jobs in Qatar

• Execute and monitor daily maintenance activities of Electrical Field area of work.
• Keep the unforeseen shutdowns in plant to a minimum duration and effectively execute all the jobs in the shortest possible time.
• Execute corrective actions based on recommendations from relevant sections.
• Study frequent failures to recommend remedial actions.
• Ensure obsolescence identification and resolution of bad actors in consultation with OEMs.
• Supervise contractors and technicians to ensure continuous optimum operating condition of plant equipment and systems.
• Implement plans for periodic, preventive, and corrective maintenance activities.
• Use engineering principles to identify problem areas and refer complex issues to the Engineering team.
• Analyze equipment and system failures and determine remedial actions, especially in relation to protection and control systems.
• Develop programs and schedules for routine integrity and function testing of electrical equipment and systems.
• Specify, support, and improve protection and control systems.
• Analyze transformer health through tests such as oil BDV, DGA, turns ratio, and sweep analysis.
• Carry out periodic testing and review of electrical protection relays.
• Lead investigations related to failures of electrical protection systems and provide recommendations.
• Review protection scheme designs including differential protection for busbars and transformers, restricted earth fault, and line protection.
• Provide input for the development of plans and budgets related to electrical protection and test activities.
• Provide specifications for the procurement of spares, consumables, equipment, and services.
• Ensure that work permits and toolbox meetings are in compliance with safety procedures.
• Develop internal procedures and test protocols for equipment and protection systems.
• Keep informed of technological developments and participate in improvement projects.
• Motivate, develop, and appraise performance of employees under area of responsibility.
• Participate in the call duty to provide a full standby service outside working hours.
  
  

• Bachelor Degree in Electrical Engineering or relevant discipline.
• Minimum of 8 years direct/relevant experience working in the Fertiliser, Petrochemical or Oil & Gas industry.
  
  

• Electrical Power Installation, Control and Distribution Systems
• Maintenance of Single and Three phase electrical motors of LV & MV levels
• Industrial lighting circuits and distribution
• Single and redundant UPS & VFD maintenance and troubleshooting
• Programming and troubleshooting of programmable logic controllers (PLC)
• Hazardous area equipment classification and maintenance of explosion proof electrical equipment
• Tender documents for electrical maintenance, material purchases, installation and commissioning
• Electrical testing tools such as CPC100, DGA, Transformer oil analyser
• Protection relays from GE 60 series, MM300, ABB REF/RFD/REX series, and Siemens SIPROTEC and SIMOCODE

• Bachelor’s degree in Instrumentation & Electrical or Electrical & Electronics Engineering.
• Chartered Engineer / Professional Engineer status or equivalent is preferable.

• 10 years relevant post-graduate experience, of which 6 years should be related to the Oil & Gas industry.
• Ability to identify and utilise relevant engineering standards and Codes related to Instrumentation Engineering.
• Proven ability to manage time, cost and quality in engineering projects within a multiple project environment.
• Good communications and presentation skills with fluency in English.

• Provide technical design and engineering services in Instrumentation Engineering for all assigned engineering projects, achieving technical quality of work in accordance with company procedures while considering quality, schedule, cost, and HSE.
• Conduct Instrumentation Engineering activities and in-house site surveys for projects, from initial concept definition through engineering studies, FEED, detailed design, and commissioning.
• Ensure that technical assurance practices, engineering standards, environmental and safety policies are incorporated and followed in work scopes and Instrumentation Engineering activities.
• Review technical deviations and variations to approved guidelines, codes, standards, and practices.
• Support Engineering Department to review, update, and apply internal standards and amendments to external standards.
• Plan and coordinate activities of a team of multidisciplinary engineers to provide timely delivery of technical services that meet project requirements.
• Coordinate engineering designs, and develop and review multi-disciplinary work scopes to ensure comprehensiveness and clarity.
• Review and approve method statements developed by contracted organisations for scope compliance and liaise with them to resolve technical issues.
• Develop, update, and monitor schedules for in-house engineering activities, and contribute to external FEED/EPIC scheduling for effective project delivery.
• Conduct evaluation of technical bid packages for scope compliance.
• Review and evaluate Contract Changes/Variations to approved guidelines and practices.
• Support the development of personal technical competency and skills and those of co-workers.
• Participate in structured training for Associate Engineers.

Not the job you are looking for? Search hundreds more

The Senior Electrical Engineer will be responsible for managing, designing, and supervising electrical engineering works to ensure compliance with project requirements, local regulations, and industry standards. The role demands strong technical knowledge, project management skills, and leadership abilities to guide engineering teams and ensure successful project delivery.

1. Design & Technical Review
   

   
   

   • Prepare, review, and approve electrical engineering designs, calculations, and drawings.
     

     
     

   • Ensure designs meet project specifications, codes, and safety standards.
     

     
     

   • Provide technical expertise and solutions for complex electrical engineering challenges.
     

     
     

2. Project Supervision & Coordination
   

   
   

   • Oversee electrical installation, testing, and commissioning activities on-site.
     

     
     

   • Coordinate with multidisciplinary teams, contractors, and consultants to ensure smooth execution.
     

     
     

   • Monitor progress, resolve technical issues, and ensure adherence to project timelines.
     

     
     

3. Quality & Compliance
   

   
   

   • Conduct site inspections and quality checks for electrical works.
     

     
     

   • Ensure compliance with MME/UPDA requirements and relevant local and international codes.
     

     
     

   • Identify and implement corrective measures for non-compliance.
     

     
     

4. Documentation & Reporting
   

   
   

   • Maintain technical documentation, project records, and design approvals.
     

     
     

   • Prepare progress reports, inspection records, and technical evaluations.
     

     
     

   • Assist project management with engineering input for decision-making.
     

     
     

5. Health, Safety & Environment (HSE)
   

   
   

   • Promote safe work practices in all electrical activities.
     

     
     

   • Identify hazards and enforce preventive safety measures on-site.
     

     
     

• Education: Bachelor’s degree in Electrical Engineering.
  

  
  

• Licenses & Certifications: MME/UPDA License (Mandatory).
  

  
  

• Experience: Minimum of 5 years in a similar senior electrical engineering role.
  

  
  

• Technical Skills:
  

  
  

  • Proficiency in AutoCAD, ETAP, and other electrical engineering software.
    

    
    

  • Strong knowledge of electrical power systems, lighting, grounding, and control systems.
    

    
    

  • Ability to interpret and review technical drawings and specifications.
    

    
    

• Strong analytical and problem-solving skills.
  

  
  

• Excellent communication and team coordination abilities.
  

  
  

• Ability to lead engineering teams and work independently.
  

  
  

• Attention to detail and organizational skills.
  

  
  

• Commitment to quality, safety, and compliance.
  

  
  

• Combination of office and site-based work.
  

  
  

• Exposure to electrical installation and construction environments.
  

  
  

• May require extended working hours based on project needs.
  

  
  

The Sr. DevOps Engineer focuses on continuous integration and continuous delivery (CI/CD) pipelines and automation for AI services. This role involves designing, implementing, and maintaining CI/CD pipelines, automating processes, and ensuring efficient and reliable deployment of AI models and applications.

1. Design, develop, and maintain CI/CD pipelines to support the continuous integration and delivery of AI models and applications.
2. Automate deployment, monitoring, and maintenance processes to ensure efficient and reliable operations.
3. Collaborate with AI engineers, data scientists, and platform engineers to understand infrastructure and deployment requirements.
4. Implement infrastructure as code (IaC) using tools such as Terraform or Ansible to manage and provision infrastructure resources.
5. Monitor the performance and availability of CI/CD pipelines and automated processes, identifying and resolving issues promptly.
6. Ensure the security and compliance of CI/CD pipelines and deployment processes, implementing best practices for data governance and regulatory requirements.
7. Optimize CI/CD pipelines and automation processes for scalability and efficiency.
8. Document CI/CD pipeline configurations, automation processes, and maintenance activities.
9. Stay updated with the latest advancements in DevOps practices and technologies.
10. Provide technical support and guidance to DevOps engineers and other team members.
11. Participate in project planning and contribute to the development of project timelines and deliverables.
12. Perform other duties relevant to the job as assigned by the Principal DevOps Engineer or senior management.

• Bachelor’s degree in Computer Science, Information Technology, or a related field
• Relevant certifications (e.g., AWS Certified DevOps Engineer, Google Cloud Professional DevOps Engineer) are preferred
• Minimum of 5 years of experience in DevOps, CI/CD pipeline management, or related fields
• Experience with automation tools and practices
• Strong programming skills in languages such as Python, Bash, or Ruby
• Proficiency in CI/CD tools (e.g., Jenkins, GitLab CI, CircleCI)
• Experience with infrastructure as code tools (e.g., Terraform, Ansible)
• Excellent problem-solving and troubleshooting skills
• Strong communication and interpersonal skills
• In-depth knowledge of CI/CD practices and tools
• Familiarity with cloud platforms (e.g., AWS, Azure, Google Cloud) and their DevOps services
• Understanding of data governance, security, and regulatory standards
• Ability to manage multiple tasks and prioritize effectively
• Strong attention to detail and commitment to delivering high-quality work
• Ability to work independently and as part of a team
• Monitoring and logging tools (e.g., Prometheus, ELK Stack)
• Collaboration and communication tools (e.g., Slack, Microsoft Teams)

Join to apply for the Sr Contract Engineer role at Airswift

Join to apply for the Sr Contract Engineer role at Airswift

Sr. Contract Engineer

Airswift is an international workforce solutions provider within the energy, process, and infrastructure industries. Airswift serves as a strategic partner to our clients, offering a turnkey workforce solution to capture and deliver the top talent needed to complete successful projects by aligning with the unique needs of our clients. With over 1,000 employees and 9,000 contractors operating in over 70 countries, our geographical reach and pool of talent available is unmatched in the industry.

Vacancy Overview

Sr. Contract Engineer

Airswift is an international workforce solutions provider within the energy, process, and infrastructure industries. Airswift serves as a strategic partner to our clients, offering a turnkey workforce solution to capture and deliver the top talent needed to complete successful projects by aligning with the unique needs of our clients. With over 1,000 employees and 9,000 contractors operating in over 70 countries, our geographical reach and pool of talent available is unmatched in the industry.

Airswift is seeking for Sr Contract Engineer to work in Qatar with a major Oil & Gas Company.

Qualification

• BSc in Engineering Discipline. A post graduate qualification in Contract Management or Project Management desirable.
  
  

• 12 years multi-disciplinary experience in contract execution, including minimum 6 years in offshore Tenders/contracts (Study/FEED as well as EPIC) for Process platforms, Living Quarter, Compressor Platform, wellhead platforms and production, gas lift and water injection lines, submarine power cables, subsea skids and umbilical and associated brownfield modification at existing platforms.
• Extensive experience in all aspects of tendering activities related to high/mid value & complex offshore Engineering Contracts for Feasibility/Concept Optimization studies, Pre-FEED, FEED & EPIC in oil and gas industry.
• Experience in Contracting Strategies Development & Implementation, Pre-qualification, review of Scope preparation of Tender document, Pre-Award & Post-Award Tender clarification / signing of Contract doc & its administration, Negotiations, Variations to Contracts, Claims Management.
• Possession of sound knowledge of Contracts Law is desirable.
• Proficient in contractual correspondence, contract verbatim, report writing with analytical, logical and problem-solving skills.
• Thorough understanding of engineering, procurement, construction techniques EPIC/ EPCM & LSTK. Other forms of contracts such as FEED/ECS/ Construction/ Consultancy contracts and related works/services.
• Computer literate and able to use this knowledge for contract analysis, evaluation of statistical data both historical and projected.
• Preferably experienced in managing contracts in SAP MM-ES and the day-to-day transactions and management.
• Quality/safety focus.
  
  

• Provide expertise and practical assistance to all assigned Sponsoring/ End-user departments of the Corporation in all tendering / contractual matters from inception of project till close-out of contracts.
• Review and advise on SOR’s considering the best practice in tendering and contracting strategy. Review and advise the pre-qualification documents, invitations and evaluation criteria prepared by Sponsoring Department and render expert advice in short listing potential bidders. Suggest most appropriate Tendering process, i.e. Open or Classified or Single source and also most appropriate bidding process, i.e. Two bid or Two stage bidding system. Prepare Tender Plan submissions in consultation with Sponsoring Department along with Tender strategy for Classified Tenders or Direct Selection.
• Review and comment on the Scopes of Work/Services, and identify contractual gaps, unlimited liabilities, impossible requirements, including the verification of the completeness of the technical information supplied and discuss it as appropriate with Sponsoring Department. Check anomalies/discrepancies, if any, in the tender document and ensure consistency throughout various sections of the tender document. Identify and prepare the most suitable pricing mechanism for a given scope of work/services, strictly as per Scope of Works/ Services.
• Ensure risk assessments are adequately identified, and risk mitigation measures are addressed and managed as far as practicable in the Tender document. Considering the various risks for the project including company HSE Risk Management Guidelines.
• Review and track the queries from tenderer during bidding phase. Review the response of the technical queries prepared by Sponsoring Department and prepare responses of unpriced commercial queries thus ensuring quality and timely issuance of the Tender Bulletins. Participate in mid-tender meeting and site visits. Participate in mid-tender meeting, site visits and face to face discussion with the Tenderers.
• Involve thoroughly during technical evaluation of the bids, especially for commercial and contractual compliances and if there are any gap, prepare clarifications required. Address various issues concerning deviations to General Conditions of Contract, technical and unpriced commercial deviation and ensure each of such issues are responded through Tender Clarification. Coordinate closely with the Technical Evaluation team in order to ensure that each and every issues under the Technical proposal submitted by Tenderers which require clarification are addressed in a timely manner until the bids are fully or substantially compliant to the Tender requirement.
• Coordinate with Sponsoring Department in preparation of Technical Evaluation report for review by the other evaluation committee members.
• Lead the Commercial evaluation, analyze the commercial proposal and prepare the Commercial Tabulation and Evaluation Report, convene meeting with the Commercial Evaluation Team members and ensure that it is submitted to the concerned Tender Committee on a timely manner.
• Ensure that the tendering process, both Technical and Commercial Evaluation are conducted in a fair and ethical manner and are consistent with the terms and conditions of Tenders, Company Policies, Guidelines and Procedures and the evaluation criteria apply equitably to all received bids.
• Coordinate with Sponsor Department proactively immediately after Commercial Evaluation Report & Award Plan submission for necessary inputs for the Letter of Award and ensure its timely issuance to the Selected Tenderer. Having issued the Letter of Award, commence preparation of the Contract document in consultation with Sponsoring Department, ensuring that all changes through Tender Bulletins/ Tender Clarifications are incorporated in the Contract document. Initiate review process of the draft Contract document, finalize it with inputs, if any from other concerned Departments and issue the Draft Contract for review and execution by the Contractor.
• Continue to support the Sponsor / End User in day-to-day execution and administration of the Contract in all correspondences, submission of applicable bonds and insurances as and when required. Change Management Process is an important area and Senior Contract Engineer has to critically contribute towards minimization of the changes by critical review of all Changes proposed by either Parties (Contractor or Company. If changes proposed are found admissible, provide advice and support to SDs for finalizing the preparation and issuance of the Change Requests (CRs) to the Contractor for their proposal. Review and evaluate the CR proposals and provide practical assistance in the completion of evaluation of the CR proposals and prepare the necessary submissions in consultation with Sponsoring Department to concerned Tenders Committees, for timely award of Variations/Amendments based on company RPWA and CCPM procedures. Provide advice regarding mitigations of Contractor’s claims
• Ensure the Close-out process is initiated by SD on a timely manner and review the Completion Certificates (CC), Statement of Final Accounts (SFA), Close out Report (COR) Contractor Performance Evaluation (CPE) and Discharge Certificate (DC)

• Seniority level Mid-Senior level

• Employment type Contract

• Job function Design and Engineering
• Industries Oil and Gas

Referrals increase your chances of interviewing at Airswift by 2x

Get notified about new Senior Contract Engineer jobs in Doha, Doha, Qatar .

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

Vacancy Overview Sr Commissioning Engineer
Airswift is an international workforce solutions provider within the energy, process, and infrastructure industries. Airswift serves as a strategic partner to our clients, offering a turnkey workforce solution to capture and deliver the top talent needed to complete successful projects by aligning with the unique needs of our clients. With over 1,000 employees and 9,000 contractors operating in over 70 countries, our geographical reach and pool of talent available is unmatched in the industry.

Airswift is seeking for Sr Commissioning Engineer to work in Qatar with a major Oil & Gas Company.
Qualification:

• B. Sc (or) BE in Instrumentation or Electrical Engineering from a recognized University with extensive commissioning experience of Oil & Gas projects. Good skills in construction management, effective communication, conflict resolution.
• Skills:
  • Good communication skills.
  • Exposure to commissioning software ICAPS and similar completion management software.

• A minimum of 12 to 14 years’ experience in relevant construction and installation activities in projects of oil & gas industry including extensive experience in large scale solar (Photovoltaic) projects. Experienced in the implementation of construction industry best practices, systems, processes and standards.
• Multi-discipline engineering exposure to troubleshooting and problem-solving skills is considered essential for the position.
• Experience in onshore projects, construction and installation activities is highly preferred.
• Strong technical experience in commissioning F&G Systems, DCS, ICSS, Power Management Systems, Building Management Systems, Instrument air etc. onshore.

• Represent Company as Commissioning Team Leader for all assigned projects onshore.
• Review and comment EPIC Contractor SOW pre-commissioning, commissioning and completion activates.
• Lead project pre-commissioning, commissioning and start-up engineering support services rendered by outsourced contractors with the objective of ensuring that all such activities are conducted as per Company regulations, project commissioning procedures and industry best practices.
• Reports to Head, Commissioning on all commissioning related matters under execution for successful completion of commissioning.
• Improve Company commissioning procedures, Initiate and contribute to the commissioning deliverables standardization.
• Develop Commissioning Strategy, Commissioning Plan and obtain approval for the same in consultation with End User and in accordance with Contract requirements and in close coordination with Head, Commissioning and EPIC Contractor.
• Leadership of the Commissioning Team in the development and arranges for approval of the commissioning procedures for all systems and facilities.
• Organize and ensure availability of the Commissioning Team and arranges the required manpower support from End User and Contractor.
• Develop planning of the commissioning activities and ensure its implementation as per the approved Commissioning Plan and project schedule.
• Detail the activities into required systems and subsystems to facilitate commissioning and start up. • Develop and arrange for the approval of all commissioning handover checklists and certificates and coordinate with Contractor/Vendors to solve system/equipment performance problems.
• Work closely with project Construction Team, End User and Contractor to coordinate punch listing activities from beginning to end of the commissioning process including clearance and close out.
• Frequent long working hours may be required, which include outdoor fieldwork.
• Exposed to multi-disciplinary, multi-cultural environment requiring special coordination
• and expediting skills. Sound inter-personal relationships and effective communication
• within Company and Contractor Teams.
• Coordinate schedule for vendors presence/visits at site(s), on-job training to assist in the commissioning of critical equipment and processes.
• Participate and contribute to all safety design reviews and studies.
• Participate in FAT and SAT as of when required.
• Review multidiscipline engineering deliverable from commissioning approaches.
• Support and assist project team in project closeout gate.

Not the job you are looking for? Search hundreds more

Carry out appropriate reservoir engineering analysis and studies to ensure that

reservoirs are being developed and managed in the most optimum manner. Review

and update existing reservoir models based on new data and if required construct

suitable new models with available data. Ensure that sufficient and reliable data on

reservoir characteristics and performance is obtained and analysed to improve

reservoir characterization. Estimate hydrocarbons in place, forecast reservoir

behaviour and serve as a basis for special studies and programmes designed to

maximise oil recovery in assigned reservoirs. Identifies reservoirs requiring study and

participates in such studies involving close liaison with specialists in other disciplines

(e.g. Geologists, Petrophysicists) and the running of computerised simulation models

to process and analyse required data. Updates reservoir and well-files and data bases

and advises PSA operators of required tests, test intervals and test sample acquisition

methods.

Preferable 8 years experience including 1-2 years at well site in a leading operating

oil company as a Reservoir Engineer in all aspects of reservoir development

including testing, modeling, sampling and related areas.

Works according to specialized technical and professional standards with

considerable latitude in devising method or approach to particular studies and

problems. Work assignments are subject to general review and direction by

supervisor.

- Produces high quality "fit-for-purpose" deficiency free work. Through the quality of

the work, establish a high degree of trust between the different disciplines of the

team.

- Required to have a broad theoretical and practical knowledge within his discipline

and have a working knowledge of the other technical disciplines within his team.

- A demonstrable ability in planning, organizing and execution of studies/projects is

required.

- A high degree of self-reliance and the ability to work with limited supervision.

- Ability to integrate disparate data and analysis from a variety of sources and

technical disciplines into a coherent working reservoir model.

- Ability to initiate and coordinate in-house, laboratory and specialist consultant

activities within his discipline.

- Be fully conversant and comfortable with all relevant software applications in his

discipline.

- High level of communication (both verbal and writing skills) and interpersonal skills.

- Have a proven ability to work effectively in teams.

-The ability to identify the key leveraging variables in complex situations frequently

involving multiple disciplines.

- Manages the sub-surface uncertainty through the anticipation of alternatives,

quantifying exposure and maximising reward.

- Due to the nature of the position, the incumbent will need the mental rigour to deal

with frequent disruptions outside working hours and to make optimal operational

decisions regardless of the nature or timing of the disruption.

B.Sc. in Petroleum or a related Engineering discipline.