34 Support Technician jobs in Qatar

The Maintenance Support
Technician is responsible for the implementation and on-going application of
the Technical Institute maintenance regime. This is inclusive of all training
devices and equipment, used to support the delivery of general engineering and specialty
training.

Equipment includes but
is not limited to the following equipment:

§ Genskills

§ Synthetic Environment
Procedural Trainer

§ Basic Helicopter
Maintenance Trainer

§ Integrated Avionics
Maintenance Trainer

§ Generic Flying Controls
Trainer

§ Weapons Loading Trainer

§ Crew Escape and Safety
Systems Trainer

§ Virtual Aircraft
Training System

§ Ejection Seats

§ Technical Training
Solutions

§ Hydraulic Trainer

§ Single Shaft Gas Turbine

§ Twin Shaft Gas Turbine

§ Generic Drill Weapons

§ Hawk Aircraft

Additionally, the maintenance support team will
be responsible for the implementation and application of all Technical
Institute tool control procedures and tool stores. Ensuring a safe working
environment is maintained, analogous to an aviation maintenance environment.

Responsibilities and Key Accountabilities

• Undertaking
  preventative and corrective maintenance services on a wide range of training
  aids and devices.
• Ensuring Site
  specific consumables and materials are stored and correctly documented.
• Acting as a
  point of contact with instructional staff, ensuring all relevant information is
  readily available and understood, regarding the safe operation of equipment.
• Strictly adhere
  to all relevant policies and procedures, ensuring safe operation within the
  Technical Institute.
• Support the
  Maintenance Support Lead / Senior Maintenance Support Technician in the
  resolution of any issues affecting the usage of equipment and peripherals.
  
• Ensuring all work
  carried out is documented in line with the Maintenance Management Policy.
• Identifying to
  the Maintenance Support Lead / Senior Maintenance Support Technician any issues
  with tools, spares, and test equipment.
• Supporting instructional
  staff during the delivery of practical training.
  
• Development
  strategy includes enrolment on a Educational Training qualification.

Requirements

• Recognized Engineering Qualification
  (Level 3 or above).
  
• A minimum of 3 years’
  experience in an Engineering Environment.
  
• Mechanical Engineering
  knowledge including Hydraulics.
  
• Electrical / electronic
  engineering and computing knowledge.
  
• Proficient in the use of
  the applicable Test equipment.
  
• Demonstrate
  excellent problem analysis and problem-solving skills.
  
• Demonstrate
  the ability to remain calm, tolerant, and professional in a stressful and
  demanding environment.
  
• Excellent
  communication skills both written and verbal.
  
• Demonstrate
  good knowledge of Microsoft Office Applications.
  
• Experience of operating in both a Middle East
  and Military environment would be preferred.
  

The following skills are desirable but not essential:

• Portable Appliance
  Testing Qualification.
  
• Troubleshooting and
  investigation of faults in Programmable Logic Controllers (PLC).
  
• Computer Diagnostics
  

#J-18808-Ljbffr

The Maintenance Support
Technician is responsible for the implementation and on-going application of
the Technical Institute maintenance regime. This is inclusive of all training
devices and equipment, used to support the delivery of general engineering and specialty
training.

Equipment includes but
is not limited to the following equipment:

Synthetic Environment
Procedural Trainer

Basic Helicopter
Maintenance Trainer

Integrated Avionics
Maintenance Trainer

Generic Flying Controls
Trainer

Weapons Loading Trainer

Crew Escape and Safety
Systems Trainer

Virtual Aircraft
Training System

Ejection Seats

Technical Training
Solutions

Hydraulic Trainer

Generic Drill Weapons

Hawk Aircraft

Additionally, the maintenance support team will
be responsible for the implementation and application of all Technical
Institute tool control procedures and tool stores. Ensuring a safe working
environment is maintained, analogous to an aviation maintenance environment.

Responsibilities and Key Accountabilities

• Undertaking
  preventative and corrective maintenance services on a wide range of training
  aids and devices.
• Ensuring Site
  specific consumables and materials are stored and correctly documented.
• Acting as a
  point of contact with instructional staff, ensuring all relevant information is
  readily available and understood, regarding the safe operation of equipment.
• Strictly adhere
  to all relevant policies and procedures, ensuring safe operation within the
  Technical Institute.
• Support the
  Maintenance Support Lead / Senior Maintenance Support Technician in the
  resolution of any issues affecting the usage of equipment and peripherals.
  
• Ensuring all work
  carried out is documented in line with the Maintenance Management Policy.
• Identifying to
  the Maintenance Support Lead / Senior Maintenance Support Technician any issues
  with tools, spares, and test equipment.
• Supporting instructional
  staff during the delivery of practical training.
  
• Development
  strategy includes enrolment on a Educational Training qualification.

The Maintenance Support
Technician is responsible for the implementation and on-going application of
the Technical Institute maintenance regime. This is inclusive of all training
devices and equipment, used to support the delivery of general engineering and specialty
training.

Equipment includes but
is not limited to the following equipment:

Genskills

Synthetic Environment
Procedural Trainer

Basic Helicopter
Maintenance Trainer

Integrated Avionics
Maintenance Trainer

Generic Flying Controls
Trainer

Weapons Loading Trainer

Crew Escape and Safety
Systems Trainer

Virtual Aircraft
Training System

Ejection Seats

Technical Training
Solutions

Hydraulic Trainer

Single Shaft Gas Turbine

Twin Shaft Gas Turbine

Generic Drill Weapons

Hawk Aircraft

Additionally, the maintenance support team will
be responsible for the implementation and application of all Technical
Institute tool control procedures and tool stores. Ensuring a safe working
environment is maintained, analogous to an aviation maintenance environment. Responsibilities and Key Accountabilities

• Undertaking
  preventative and corrective maintenance services on a wide range of training
  aids and devices.
• Ensuring Site
  specific consumables and materials are stored and correctly documented.
• Acting as a
  point of contact with instructional staff, ensuring all relevant information is
  readily available and understood, regarding the safe operation of equipment.
• Strictly adhere
  to all relevant policies and procedures, ensuring safe operation within the
  Technical Institute.
• Support the
  Maintenance Support Lead / Senior Maintenance Support Technician in the
  resolution of any issues affecting the usage of equipment and peripherals.
  
• Ensuring all work
  carried out is documented in line with the Maintenance Management Policy.
• Identifying to
  the Maintenance Support Lead / Senior Maintenance Support Technician any issues
  with tools, spares, and test equipment.
• Supporting instructional
  staff during the delivery of practical training.
  
• Development
  strategy includes enrolment on a Educational Training qualification.

Requirements

• Recognized Engineering Qualification
  (Level 3 or above).
  
• A minimum of 3 years
  experience in an Engineering Environment.
  
• Mechanical Engineering
  knowledge including Hydraulics.
  
• Electrical / electronic
  engineering and computing knowledge.
  
• Proficient in the use of
  the applicable Test equipment.
  
• Demonstrate
  excellent problem analysis and problem-solving skills.
  
• Demonstrate
  the ability to remain calm, tolerant, and professional in a stressful and
  demanding environment.
  
• Excellent
  communication skills both written and verbal.
  
• Demonstrate
  good knowledge of Microsoft Office Applications.
  
• Experience of operating in both a Middle East
  and Military environment would be preferred.
  

The following skills are desirable but not essential:

• Portable Appliance
  Testing Qualification.
  
• Troubleshooting and
  investigation of faults in Programmable Logic Controllers (PLC).
  
• Computer Diagnostics
  

Air

Trades, manufacturing and operations

Experienced Professionals

Company Industry

• IT - Software Services

Department / Functional Area

• Training
• Learning

Keywords

Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at

People Looking for Training Support Technician Jobs also searched #J-18808-Ljbffr

The Maintenance Support Technician is responsible for the implementation and on-going application of the Technical Institute maintenance regime. This is inclusive of all training devices and equipment, used to support the delivery of general engineering and specialty training. Equipment includes but is not limited to the following equipment: Synthetic Environment Procedural Trainer Basic Helicopter Maintenance Trainer Integrated Avionics Maintenance Trainer Generic Flying Controls Trainer Weapons Loading Trainer Crew Escape and Safety Systems Trainer Virtual Aircraft Training System Ejection Seats Technical Training Solutions Hydraulic Trainer Generic Drill Weapons Hawk Aircraft Additionally, the maintenance support team will be responsible for the implementation and application of all Technical Institute tool control procedures and tool stores. Ensuring a safe working environment is maintained, analogous to an aviation maintenance environment. Responsibilities and Key Accountabilities Undertaking preventative and corrective maintenance services on a wide range of training aids and devices. Ensuring Site specific consumables and materials are stored and correctly documented. Acting as a point of contact with instructional staff, ensuring all relevant information is readily available and understood, regarding the safe operation of equipment. Strictly adhere to all relevant policies and procedures, ensuring safe operation within the Technical Institute. Support the Maintenance Support Lead / Senior Maintenance Support Technician in the resolution of any issues affecting the usage of equipment and peripherals.

Ensuring all work carried out is documented in line with the Maintenance Management Policy. Identifying to the Maintenance Support Lead / Senior Maintenance Support Technician any issues with tools, spares, and test equipment. Supporting instructional staff during the delivery of practical training.

Development strategy includes enrolment on a Educational Training qualification. The Maintenance Support Technician is responsible for the implementation and on-going application of the Technical Institute maintenance regime. This is inclusive of all training devices and equipment, used to support the delivery of general engineering and specialty training. Equipment includes but is not limited to the following equipment: Genskills Synthetic Environment Procedural Trainer Basic Helicopter Maintenance Trainer Integrated Avionics Maintenance Trainer Generic Flying Controls Trainer Weapons Loading Trainer Crew Escape and Safety Systems Trainer Virtual Aircraft Training System Ejection Seats Technical Training Solutions Hydraulic Trainer Single Shaft Gas Turbine Twin Shaft Gas Turbine Generic Drill Weapons Hawk Aircraft Additionally, the maintenance support team will be responsible for the implementation and application of all Technical Institute tool control procedures and tool stores. Ensuring a safe working environment is maintained, analogous to an aviation maintenance environment.

Responsibilities and Key Accountabilities

Undertaking preventative and corrective maintenance services on a wide range of training aids and devices. Ensuring Site specific consumables and materials are stored and correctly documented. Acting as a point of contact with instructional staff, ensuring all relevant information is readily available and understood, regarding the safe operation of equipment. Strictly adhere to all relevant policies and procedures, ensuring safe operation within the Technical Institute. Support the Maintenance Support Lead / Senior Maintenance Support Technician in the resolution of any issues affecting the usage of equipment and peripherals.

Ensuring all work carried out is documented in line with the Maintenance Management Policy. Identifying to the Maintenance Support Lead / Senior Maintenance Support Technician any issues with tools, spares, and test equipment. Supporting instructional staff during the delivery of practical training.

Development strategy includes enrolment on a Educational Training qualification. Requirements Recognized Engineering Qualification (Level 3 or above).

A minimum of 3 years experience in an Engineering Environment.

Mechanical Engineering knowledge including Hydraulics.

Electrical / electronic engineering and computing knowledge.

Proficient in the use of the applicable Test equipment.

Demonstrate excellent problem analysis and problem-solving skills.

Demonstrate the ability to remain calm, tolerant, and professional in a stressful and demanding environment.

Excellent communication skills both written and verbal.

Demonstrate good knowledge of Microsoft Office Applications.

Experience of operating in both a Middle East and Military environment would be preferred.

The following skills are desirable but not essential: Portable Appliance Testing Qualification.

Troubleshooting and investigation of faults in Programmable Logic Controllers (PLC).

Computer Diagnostics

Air Trades, manufacturing and operations Experienced Professionals Company Industry IT - Software Services Department / Functional Area Training Learning Keywords Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at People Looking for Training Support Technician Jobs also searched #J-18808-Ljbffr

The Maintenance Support Technician is responsible for the implementation and on-going application of the Technical Institute maintenance regime. This is inclusive of all training devices and equipment, used to support the delivery of general engineering and specialty training. Equipment includes but is not limited to the following equipment: §

Genskills §

Synthetic Environment Procedural Trainer §

Basic Helicopter Maintenance Trainer §

Integrated Avionics Maintenance Trainer §

Generic Flying Controls Trainer §

Weapons Loading Trainer §

Crew Escape and Safety Systems Trainer §

Virtual Aircraft Training System §

Ejection Seats §

Technical Training Solutions §

Hydraulic Trainer §

Single Shaft Gas Turbine §

Twin Shaft Gas Turbine §

Generic Drill Weapons §

Hawk Aircraft Additionally, the maintenance support team will be responsible for the implementation and application of all Technical Institute tool control procedures and tool stores. Ensuring a safe working environment is maintained, analogous to an aviation maintenance environment.

Responsibilities and Key Accountabilities

Undertaking preventative and corrective maintenance services on a wide range of training aids and devices. Ensuring Site specific consumables and materials are stored and correctly documented. Acting as a point of contact with instructional staff, ensuring all relevant information is readily available and understood, regarding the safe operation of equipment. Strictly adhere to all relevant policies and procedures, ensuring safe operation within the Technical Institute. Support the Maintenance Support Lead / Senior Maintenance Support Technician in the resolution of any issues affecting the usage of equipment and peripherals.

Ensuring all work carried out is documented in line with the Maintenance Management Policy. Identifying to the Maintenance Support Lead / Senior Maintenance Support Technician any issues with tools, spares, and test equipment. Supporting instructional staff during the delivery of practical training.

Development strategy includes enrolment on a Educational Training qualification. Requirements

Recognized Engineering Qualification (Level 3 or above).

A minimum of 3 years’ experience in an Engineering Environment.

Mechanical Engineering knowledge including Hydraulics.

Electrical / electronic engineering and computing knowledge.

Proficient in the use of the applicable Test equipment.

Demonstrate excellent problem analysis and problem-solving skills.

Demonstrate the ability to remain calm, tolerant, and professional in a stressful and demanding environment.

Excellent communication skills both written and verbal.

Demonstrate good knowledge of Microsoft Office Applications.

Experience of operating in both a Middle East and Military environment would be preferred.

The following skills are desirable but not essential: Portable Appliance Testing Qualification.

Troubleshooting and investigation of faults in Programmable Logic Controllers (PLC).

Computer Diagnostics

#J-18808-Ljbffr

Talent Leaders is a Federally incorporated Canadian firm operating globally with their strong presence in Canada, Qatar, UAE and KSA. Talent Leaders brings 3 decades of consulting experience to its potential candidates and corporate and government clients. Talent Leaders operates in a unique way to translate the aspirations of the highly competent candidates into reality and present the candidates to the most deserving employer. Organizations choose their employees for their competence, expertise, and experience while Talent Leaders chooses its client (corporate employers) as our candidates deserve the best.

Summary
This is a hybrid role combining cybersecurity implementation and end-user technical support. The position will ensure frontline cybersecurity enforcement while providing L1/L2 support to business users, in line with Qatar’s digital governance mandates.

Roles and Responsibilities

• Provide L1/L2 technical support for desktops, devices, and user access
• Support AD/Entra ID lifecycle within shared services
• Implement and manage perimeter defense, NAC, and firewall rules
• Collaborate with national SOC and respond to incidents
• Enable secure mobile and VPN access as per remote access policy
• Conduct internal audits, prepare incident records, and asset tracking
• Ensure zero-trust segmentation and endpoint protection
• Document and escalate incidents per Q-CERT or NIA protocols

Ideal Candidate Specification

• Bachelor’s degree or diploma in IT, Cybersecurity, or related field
• 3–5 years of relevant experience in end-user support and cybersecurity implementation
• Hands-on experience in managing user access controls and device security
• Basic understanding of national mandates such as Q-CERT or NIA
• Familiarity with ITSM tools and service ticket lifecycle
• Certifications such as CompTIA Security+, Microsoft Modern Desktop, or equivalent preferred
• Strong problem-solving and communication skills

#J-18808-Ljbffr

Talent Leaders is a Federally incorporated Canadian firm operating globally with their strong presence in Canada, Qatar, UAE and KSA. Talent Leaders brings 3 decades of consulting experience to its potential candidates and corporate and government clients. Talent Leaders operates in a unique way to translate the aspirations of the highly competent candidates into reality and present the candidates to the most deserving employer. Organizations choose their employees for their competence, expertise, and experience while Talent Leaders chooses its client (corporate employers) as our candidates deserve the best. Summary This is a hybrid role combining cybersecurity implementation and end-user technical support. The position will ensure frontline cybersecurity enforcement while providing L1/L2 support to business users, in line with Qatar’s digital governance mandates. Roles and Responsibilities Provide L1/L2 technical support for desktops, devices, and user access Support AD/Entra ID lifecycle within shared services Implement and manage perimeter defense, NAC, and firewall rules Collaborate with national SOC and respond to incidents Enable secure mobile and VPN access as per remote access policy Conduct internal audits, prepare incident records, and asset tracking Ensure zero-trust segmentation and endpoint protection Document and escalate incidents per Q-CERT or NIA protocols Ideal Candidate Specification Bachelor’s degree or diploma in IT, Cybersecurity, or related field 3–5 years of relevant experience in end-user support and cybersecurity implementation Hands-on experience in managing user access controls and device security Basic understanding of national mandates such as Q-CERT or NIA Familiarity with ITSM tools and service ticket lifecycle Certifications such as CompTIA Security+, Microsoft Modern Desktop, or equivalent preferred Strong problem-solving and communication skills

#J-18808-Ljbffr

Are you the tech troubleshooter everyone turns to? Are you passionate about keeping systems running smoothly and solving issues before they become problems? If so, this is your opportunity to be the go-to expert!

• We’re looking for an experienced IT Support Technician who will play a vital role in ensuring the day-to-day functionality of IT systems, providing fast and effective support, and maintaining high standards across system performance and user experience.

Your Key Responsibilities :

• Respond to helpdesk tickets and resolve user issues efficiently to minimize downtime.
• Troubleshoot hardware and software problems for desktops, laptops, tablets, servers, printers, and scanners.
• Diagnose and resolve system, network, and application issues.
• Perform preventive and corrective maintenance, system patches, updates, and upgrades.
• Visit operational sites (fuel stations, inspection stations, depots) to provide on-site support.
• Collaborate with internal teams and external vendors to ensure seamless IT operations and project delivery.
• Monitor and maintain inventory of all IT assets, licenses, and ensure compliance.
• Support PC systems, retail automation solutions, and user applications to minimize disruptions.
• Provide Level 1 and Level 2 support, ensuring SLAs are met for all incidents and requests.
• Assist with termination, installation, and configuration of forecourt automation devices and ensure their smooth operation.
• Facilitate user training and provide clear communication regarding new systems and updates.
• Proactively recommend solutions and improvements to enhance system performance and reliability.

#J-18808-Ljbffr

Are you the tech troubleshooter everyone turns to? Are you passionate about keeping systems running smoothly and solving issues before they become problems? If so, this is your opportunity to be the go-to expert! We’re looking for an experienced IT Support Technician who will play a vital role in ensuring the day-to-day functionality of IT systems, providing fast and effective support, and maintaining high standards across system performance and user experience. Your Key Responsibilities : Respond to helpdesk tickets and resolve user issues efficiently to minimize downtime. Troubleshoot hardware and software problems for desktops, laptops, tablets, servers, printers, and scanners. Diagnose and resolve system, network, and application issues. Perform preventive and corrective maintenance, system patches, updates, and upgrades. Visit operational sites (fuel stations, inspection stations, depots) to provide on-site support. Collaborate with internal teams and external vendors to ensure seamless IT operations and project delivery. Monitor and maintain inventory of all IT assets, licenses, and ensure compliance. Support PC systems, retail automation solutions, and user applications to minimize disruptions. Provide Level 1 and Level 2 support, ensuring SLAs are met for all incidents and requests. Assist with termination, installation, and configuration of forecourt automation devices and ensure their smooth operation. Facilitate user training and provide clear communication regarding new systems and updates. Proactively recommend solutions and improvements to enhance system performance and reliability.

#J-18808-Ljbffr

About Calo

Launched in November of 2019, Calo is on a mission to make healthy easy. We’re a team of dedicated people driving this mission by providing better, faster, and cheaper ways to access food through technology.

What you’ll be working on

As the Public Relations & Customer Support Specialist , you will be the face of Calo in Qatar, representing our brand to both businesses and customers with professionalism and warmth. You will lead public relations initiatives, strengthen relationships with B2B partners, and engage with customers to ensure their satisfaction and loyalty. Your role will blend strategic PR activities, such as media relations, events, and brand promotion with hands-on customer support, ensuring a seamless experience at every touchpoint. You will also manage governmental and business clearances, coordinate with internal teams, and actively contribute to growing Calo’s presence and reputation in the Qatari market.

Main Responsibilities

• Develop and execute PR strategies to promote Calo’s brand image in Qatar.
• Handle press releases, media relations, and event planning.
• Proactively engage with customers through calls, meetings, and digital channels.
• Maintain excellent communication in both Arabic and English across all interactions.
• Monitor customer feedback and work with internal teams to address pain points.
• Support business development efforts by building and nurturing relationships with key stakeholders.
• Manage and facilitate governmental and business clearances as needed.
• Act as the primary point of contact for local media and public inquiries.
• Identify opportunities for partnerships, collaborations, and community engagement.
• Handle escalated customer concerns with empathy and efficiency.
• Keep up to date with industry trends and competitor activities to inform PR and CX strategies.

Ideal candidate

Qualifications

• Qatari national with excellent communication skills in Arabic and English.
• 2–4 years of experience in Public Relations and/or Business Development, with customer-facing responsibilities.
• Proven experience in managing client relationships and handling media communications.

Knowledge & Competency

• Strong understanding of B2B engagement and customer experience .
• Skilled in public relations, media management, and brand promotion.
• Knowledge of handling business clearances in Qatar.
• Ability to develop and implement customer engagement strategies.

Personality

• charismatic, confident, and approachable. Comfortable being the face of the brand.
• Professional, proactive, and adaptable in fast-paced environments.
• Strong problem-solving skills with the ability to think on your feet.
• Balanced approach to managing PR priorities alongside customer service needs.

#J-18808-Ljbffr