28 Production Technician jobs in Qatar

Position description

Job title

Production Technician M/F

Contract type

Fixed-term-contract

Contractual hours

Full time

Contract duration

4 years

Job description

We currently have an opportunity within SPIE Oil & Gas Services Middle East LLC Doha, Qatar for a

production Technician

Job Purpose:

Ensure safe and accurate operation of wells, production processes and utility systems in accordance with Company Procedures.

To operate process and utility equipment, wells, pipelines etc. in a safe and efficient manner and in accordance with operating procedures and guidelines

- Monitoring and controlling all oil, gas production and utility systems to ensure that production and environmental targets are achieved.

- Acting as a member of the Offshore Emergency Response Team in the event of an incident to ensure minimal harm to personnel, environment and asset

- Contributing to the development and review of risk assessments to ensure that hazards have been identified, adequate mitigations are in place and risk has been reduced.

Your main duties will be to: -

- Assist the Production Supervisor in safe delivery of core business through active management of production tasks and core operational activities.

- Act as a Permit Authority to ensure that all works are carried out in accordance with the Permit to Work process and company requirements.

- Provide the Production Supervisor with analysis and comment on production volumes, opportunities and risks in order to improve business performance.

- Provide visible leadership to personnel to ensure production targets are met and production / rejection volumes are maximized.

- Promote NOC core values by being a safety role model, showing trust, respect and commitment, fostering collaboration across the organization.

- Promote cost consciousness in order to embed a strong cost culture.

- Drive an incident free environment by establishing and maintaining a strong incident free culture.

- Actively participates in and promotes company health and safety campaigns, policies and procedures, that ensures personal safety and that of colleagues at all times.

- Ensure compliance with Operating Procedures and Guidelines to ensure Process Safety, Operational Safety and Plant Integrity.

- Conduct chemical stock checks and ensure chemical injections are optimised.

- Isolate and make safe equipment for maintenance.

Ideally, you will have graduated with minimum Higher Secondary School Education plus a three-year technical diploma (HNC, HND or equivalent).

Relevant Work Experience: Minimum of 10 years of experience with at least 5 years offshore level on-field equipment in diversified oil & gas processing or petrochemical plants.

You are fluent in English with both written and verbal communication

You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.

Profile

Education: High School Diploma / Technical certificate in Discipline.

- Industry Experience: Minimum 4 years recent experience in the petrochemical, refining, oil /gas exploration and/or production industries in a similar r le.

Competencies and Behaviors:

- Thorough understanding and use of P&ID and C&E drawings and how isolations are created, applied and controlled.

- Basic understanding of instrumentation and control equipment principles, including fault diagnosis.

• Thorough understanding and application of industry process safety guidelines and procedures.
• Ability to set and implement operational objectives.
• Motivated, flexible in approach and with a proactive mindset.
• Ability to work with teams in a complex and multicultural environment.
• Leadership, communication and analytical skills.
• Fluent in written and spoken English.
• Computer literate.

Job Description

• Machine Operation: Operate Beam Saw machines to cut wood, MDF, chipboard, or other materials as per technical drawings and specifications.
• Setup and adjustments: Set up the machine, adjust saw blades, speed and feed rates for different materials and job requirements.
• Quality control: Inspect materials before and after cutting to ensure accuracy and quality
• Maintenance: Perform routine maintenance and troubleshooting to ensure the machine operates efficiently
• Safety Compliance: Follow safety protocols to prevent accidents and ensure a safe working environment
• Documentation: Keep accurate records of materials used, production output, and machine performance
• Collaboration: Work with Team members to ensure smooth workflow and timely completion of tasks.

Skills and Qualifications:

• Experience in operating beam saw or similar machinery
• Ability to read and interpret technical drawings and blueprints
• Knowledge of different materials and their properties
• Attention to detail and precision in measurements and cuts
• Physical stamina and ability to handle heavy materials
• Understanding of safety procedures related to machinery operation

Job Type: Full-time

Max Design a printing company is looking for a skilled and experienced MACHINE OPERATOR who can meet the following requirements:

_with at least 1 year experience in advertising and printing company .

_with experience in operating large format machines (160cm,320cm).

-Candidates should be locally available in Qatar

-Any nationality

* Details and other information will be discussed upon interview. Interested candidates can send their CV to

Job Type: Full-time

Pay: QAR1, QAR2,000.00 per month

Experience:

• Machine operator: 1 year (Preferred)

Language:

• English (Preferred)

Company Description

Thabt is an automotive accessories brand based in Qatar since 2009. We provide industry-leading solutions for vehicle mounting, combining the right selection of devices to ensure safe and legal driving. Our products include a wide range of automotive accessories for various purposes, all European-made and sourced from globally recognized manufacturers. This guarantees the quality and modern technology of our offerings.

Job Summary:

We are seeking a skilled CNC Milling Machine Operator with hands-on experience in 4-axis and 5-axis machining centers. The ideal candidate will be responsible for setting up, operating, and programming CNC milling machines to produce precision components according to technical drawings and specifications.

Key Responsibilities:

• Set up and operate
  4-axis and 5-axis CNC milling machines
  .
• Interpret and work from engineering drawings, CAD/CAM files, and technical specifications.
• Create, edit, and optimize CNC programs (using software such as
  Mastercam, Siemens, Fanuc, or Heidenhain controls
  ).
• Select and install proper tooling, fixtures, and work-holding devices.
• Monitor machining operations, adjust feeds, speeds, and paths to maintain quality and efficiency.
• Perform precision measurement and inspection of finished parts using calipers, micrometers, CMM, and gauges.
• Troubleshoot machining issues, identify errors, and make corrective actions.
• Maintain machine cleanliness, lubrication, and basic preventive maintenance.
• Work collaboratively with engineers and production teams to ensure accurate and timely job completion.
• Adhere to safety protocols and quality standards (ISO / AS9100 if applicable).

Qualifications & Experience:

• Minimum
  3–5 years' experience
  in CNC milling operations.
• Strong background in
  4-axis and 5-axis CNC machining & programming
  .
• Proficiency in CNC control systems (Fanuc, Siemens, Heidenhain, or equivalent).
• Hands-on experience with
  CAD/CAM software
  (e.g., Mastercam, NX, SolidCAM).
• Strong understanding of machining processes, cutting tools, speeds, feeds, and materials (steel, aluminum, titanium, etc.).
• Ability to read and interpret
  blueprints, GD&T symbols, and technical drawings
  .
• Good problem-solving skills and attention to detail.
• Strong commitment to safety, precision, and quality.

Preferred Skills:

• Experience in aerospace, automotive, or precision engineering industries.
• Knowledge of CNC machine maintenance and troubleshooting.
• Familiarity with lean manufacturing practices.

Tuber Machine Operator (2 vacancies)

• Education: High school diploma or vocational/technical certification in mechanical or industrial fields (preferred)
• Experience: Experience in operating tuber or similar packaging/converting machines (preferred)
• Role: Operates, monitors, and maintains tuber machines for producing multiwall cement paper bags. Ensures smooth operation, quality, and compliance with production standards.
• Key Responsibilities:
• Operate and monitor tuber machine as per specifications
• Set up parameters (size, length, glue application, cutting, printing)
• Inspect raw materials (kraft paper, glue) and finished tubes
• Perform maintenance, troubleshooting, and minor repairs
• Ensure proper alignment, folding, and pasting
• Handle knife making and setting
• Record daily reports (output, waste, downtime)
• Coordinate with maintenance and QC teams
• Follow safety, 5S, and housekeeping practices
• Qualifications & Skills:
• Experience with tuber/packaging machines
• Basic knowledge of mechanics, pneumatics, adhesives
• Strong attention to quality control
• Good communication and teamwork skills

Salary & Benefits:

• Salary (final as per CV and selection) + Overtime
• Food allowance: Included in salary
• Accommodation: Provided by company (bachelor sharing)
• Transportation: Provided (camp to factory)
• Contract: 3 years
• Other benefits: As per Qatar Labour Law

Job Type: Full-time

Pay: QAR1.00 - QAR2.00 per month

Bottomer Machine Operator (1 Vacancy)

• Education: High school diploma or technical/vocational training
• Experience: 3–5 years in cement paper bag manufacturing
• Role: Operates, monitors, and maintains bottomer machines used in manufacturing cement paper bags. Ensures efficient production, quality standards, and compliance with safety.
• Key Responsibilities:
• Operate and control production processes
• Set up machine parameters for different bag sizes and specifications
• Monitor processes to ensure quality and minimize waste
• Perform checks, adjustments, and troubleshooting
• Prepare and adjust gluing applications
• Assist with preventive maintenance and minor repairs
• Inspect finished bags for defects and compliance
• Record daily production, downtime, and maintenance
• Follow safety, quality, and housekeeping practices

Salary & Benefits:

• Salary range: (final as per CV and selection) + Overtime
• Food allowance: Included in salary
• Accommodation: Provided by company (bachelor sharing)
• Transportation: Provided (camp to factory)
• Contract: 3 years
• Other benefits: As per Qatar Labour Law

Job Type: Full-time

Pay: QAR1.00 - QAR2.00 per month

Job Title: Press Brake Machine (Bending Machine) Operator – Stainless Steel Kitchen Works

Location:Qatar

Employment Type: Full-time

About the Role:

We are looking for highly skilled Press Brake Machine Operators (Bending Machine) with proven experience in stainless steel fabrication, particularly in kitchen equipment works. The ideal candidate must have strong technical knowledge of bending machines and be capable of delivering precise, high-quality stainless steel components.

Key Responsibilities:

• Operate press brake/bending machines for stainless steel sheet metal.
• Read and interpret technical drawings, blueprints, and fabrication plans.
• Ensure accurate bending, forming, and finishing of stainless steel parts for kitchen equipment.
• Conduct quality checks and maintain production accuracy.
• Troubleshoot machine issues and perform minor maintenance.
• Follow health, safety, and quality standards at all times.

Requirements:

• Minimum 2 years of experience as a Press Brake Operator (Bending Machine)
• Expertise in stainless steel kitchen works fabrication (mandatory).
• Ability to read and understand technical drawings.
• Strong attention to detail and precision.
• Knowledge of machine setup, calibration, and maintenance.
• Ability to work independently and as part of a team.

Preferred:

• Experience with CNC press brake machines.
• Familiarity with other sheet metal fabrication tools and techniques.

Job Type: Full-time

Application Question(s):

• How soon you can join?
• How much is your salary expectation?

Key Responsibilities

Planning & Coordination

• Review and interpret design drawings and project specifications pertaining to steel columns, rafters, and sheeting systems.
• Develop, monitor and update installation schedules in line with project milestones for structural frame erection and enclosure works.
• Coordinate material delivery for steel columns, rafters, roof and wall sheeting, insulation and accessories to ensure no delays.
• Manage daily activities of site supervisors, subcontractors and erection crews for both the structural framework (columns/rafters) and the cladding/insulation works.

Site Execution

• Supervise the installation of structural steel columns and rafter systems, ensuring correct alignment, connections, and integrity prior to sheeting.
• Oversee the installation of roofing sheets, wall panels, insulation, flashings, and accessories once the structural frame is erected.
• Ensure that columns, rafters and sheeting systems are installed according to design, checking alignment, fasteners, overlaps, sealing, finish quality, and structural ties.
• Verify compliance of structural and enclosure works with client specifications, local building codes (including load transfer through columns/rafters) and safety standards.
• Identify and resolve on-site technical or logistical issues—especially those related to steel frame erection and integration of sheeting/cladding works.

Quality Assurance & Safety

• Implement and maintain strict quality control procedures during both the structural steel erection (columns/rafters) and sheeting/cladding installation.
• Conduct routine inspections, maintain checklists and as-built documentation covering structural columns, rafter systems, and sheeting works.
• Ensure adherence to HSE standards and promote a proactive safety culture, particularly when working at height on rafters, and during frame erection.
• Coordinate with QA/QC teams and third-party inspectors as required for both structural and enclosure stage inspections.

Communication & Reporting

• Provide daily and weekly progress reports to the Project Manager, covering structural frame erection (columns/rafters) and the sheeting/cladding phases.
• Maintain detailed site records, including manpower deployment, materials consumption (structural steel vs sheeting/insulation), and incident logs across both structural and envelope scopes.
• Attend project coordination and progress review meetings involving structural, procurement, and site execution stakeholders.
• Report risks, delays, and deviations—particularly those impacting the structural frame or enclosure installation—and propose corrective actions.

Qualifications & Experience

• Bachelor's Degree in Civil, Mechanical, or Structural Engineering.
• 5–7 years of experience in steel structure works—particularly erection of steel columns, rafters and sheeting/cladding systems.
• Experience with industrial and large-scale infrastructure projects preferred.

Technical Skills

• Strong knowledge of steel structure components: columns, rafters, purlins, girts, panels, fasteners, insulation systems and their connections.
• Ability to read and interpret structural drawings as well as installation manuals for both the frame (columns/rafters) and the sheeting envelope.
• Proficient in AutoCAD, MS Office, and project scheduling tools (MS Project / Primavera preferred).
• Familiarity with local construction and structural codes, load paths through columns and rafters, and QA/QC standards for structural and cladding work.

Soft Skills

• Excellent communication and coordination abilities with structural design, procurement, site execution and subcontractor teams.
• Strong leadership and team management across both structural frame erection and envelope installation.
• Analytical thinking, problem-solving skills and attention to detail (especially in structural alignment, load transfer, and finishing).
• Commitment to safety, quality, and meeting deadlines under both structural and sheeting scopes.

Preferred Certifications (Not Mandatory)

• OSHA or equivalent safety certification.
• PMP or project management training.
• Working at Height certification (particularly relevant when working on rafters and roof installations).

Work Conditions

• Site-based position involving fieldwork, inspections and supervision of both structural frame erection and envelope installation.
• May require travel to multiple project sites.
• Flexibility for extended hours during peak installation phases (frame erection and cladding/insulation fitting).

Job Type: Permanent

Must possess a minimum of 10 years of experience in the relevant glass industry.

Job Type: Full-time