56 Drilling Supervisor jobs in Qatar
DRILLING SUPERVISOR
QatarEnergy Qatarization
Posted 11 days ago
Job Viewed
Job Description
Primary Purpose of the Job
To be the QatarEnergy Company representative on the offshore jack-up drilling rig and thereby to be responsible for all operations on the rig and to ensure they are performed in a safe and efficient manner and achieve their objectives.
- Direct and control operations at the rig site to ensure they are performed in accordance with QP requirements and without accidents of any kind. In particular ensure that the operations are efficiently and safely performed in compliance with the approved drilling or workover program, the Drilling Reference Manual (ORM) the Drilling Department 'Golden Rules', and that all rig site personnel are aware of and adhere to these requirements.
- Manage HSE at the rig site as the highest priority by demonstrating visible HSE leadership and an unrelenting commitment to a safe working environment. This shall include: Participating in the Drilling Contractors 'STOP' program to identify unsafe conditions or procedures, performing at least one full 'STOP' walkabout per week and encouraging active participation by all Service Company personnel in the STOP program to eliminate accidents before they occur.
- Report all HSE incidents in a timely and accurate manner using the SAP system, and lead the initial on-site investigation of all incidents and near misses, to identify and document the sequence of events and immediate causes of the incident as quickly as possible.
- Resolve operational problems as they arise within the framework of the QP policies and standards, and ensure that non-routine or unforeseen activities are always meticulously planned and organized to identify potential hazards and to mitigate risks.
- Review the drilling or workover program prior to the start of operations to ensure that the equipment and personnel on the rig are capable to perform the work and that there are no errors or anomalies in the program.
- Report all daily activities and enter well data and cost information in Open-Wells, to ensure complete and correct record of activities with accurate cost information for future analysis and performance improvement.
- Manage the bi-weekly BOP pressure and function test, and sign-off the test record and pressure charts. Verify the correct BOP certification is available at the rig site, to ensure the integrity of this critical equipment in accordance with QP standards.
- Manage rig operations by planning and prioritizing activities, and making written instructions for the Drilling Contractor OIM and service Company representatives, to ensure that the program objectives are achieved in an efficient and timely manner and within budget. Provide written handover to back-to-back DSV and maintain a record of lessons learned and improvement opportunities, to facilitate continuous performance improvement.
- Supervise and monitor all QP Contractors involved in the rig operations, to ensure a high quality of work is performed in accordance with QP requirements. This shall include assessing and documenting service quality, verifying certification, and compliance documents for all equipment and chemicals delivered to the rig site.
- Monitor, train and support new QP graduate engineers. This shall include assigning specific tasks to broaden the learning process to ensure effective on-the-job training and development of Qatari nationals.
At least 10 years experience in drilling operations including 5 years as an Offshore Drilling Supervisor. Experience in workover operations in gas and horizontal wells is preferred. Strong leadership and people management skills with a good awareness of cultural sensitivities. Excellent communication skills in English (demonstrated verbal and written skills). Commitment and passion for managing HSE. Energy and enthusiasm to deliver the targets in an efficient and problem-free manner. Ability to make the correct operational decisions based on systematic analysis with rigorous attention to detail.
Educational QualificationsB.Sc degree in an Engineering discipline or equivalent. IWCF Certified at Supervisor level.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
0
DRILLING SUPERVISOR
Doha, Doha
QatarEnergy Qatarization
Posted 4 days ago
Job Viewed
Job Description
Primary Purpose of the Job
To be the QatarEnergy Company representative on the offshore jack-up drilling rig and thereby to be responsible for all operations on the rig and to ensure they are performed in a safe and efficient manner and achieve their objectives. Direct and control operations at the rig site to ensure they are performed in accordance with QP requirements and without accidents of any kind. In particular ensure that the operations are efficiently and safely performed in compliance with the approved drilling or workover program, the Drilling Reference Manual (ORM) the Drilling Department 'Golden Rules', and that all rig site personnel are aware of and adhere to these requirements. Manage HSE at the rig site as the highest priority by demonstrating visible HSE leadership and an unrelenting commitment to a safe working environment. This shall include: Participating in the Drilling Contractors 'STOP' program to identify unsafe conditions or procedures, performing at least one full 'STOP' walkabout per week and encouraging active participation by all Service Company personnel in the STOP program to eliminate accidents before they occur. Report all HSE incidents in a timely and accurate manner using the SAP system, and lead the initial on-site investigation of all incidents and near misses, to identify and document the sequence of events and immediate causes of the incident as quickly as possible. Resolve operational problems as they arise within the framework of the QP policies and standards, and ensure that non-routine or unforeseen activities are always meticulously planned and organized to identify potential hazards and to mitigate risks. Review the drilling or workover program prior to the start of operations to ensure that the equipment and personnel on the rig are capable to perform the work and that there are no errors or anomalies in the program. Report all daily activities and enter well data and cost information in Open-Wells, to ensure complete and correct record of activities with accurate cost information for future analysis and performance improvement. Manage the bi-weekly BOP pressure and function test, and sign-off the test record and pressure charts. Verify the correct BOP certification is available at the rig site, to ensure the integrity of this critical equipment in accordance with QP standards. Manage rig operations by planning and prioritizing activities, and making written instructions for the Drilling Contractor OIM and service Company representatives, to ensure that the program objectives are achieved in an efficient and timely manner and within budget. Provide written handover to back-to-back DSV and maintain a record of lessons learned and improvement opportunities, to facilitate continuous performance improvement. Supervise and monitor all QP Contractors involved in the rig operations, to ensure a high quality of work is performed in accordance with QP requirements. This shall include assessing and documenting service quality, verifying certification, and compliance documents for all equipment and chemicals delivered to the rig site. Monitor, train and support new QP graduate engineers. This shall include assigning specific tasks to broaden the learning process to ensure effective on-the-job training and development of Qatari nationals. Required Experience and Skills
At least 10 years experience in drilling operations including 5 years as an Offshore Drilling Supervisor. Experience in workover operations in gas and horizontal wells is preferred. Strong leadership and people management skills with a good awareness of cultural sensitivities. Excellent communication skills in English (demonstrated verbal and written skills). Commitment and passion for managing HSE. Energy and enthusiasm to deliver the targets in an efficient and problem-free manner. Ability to make the correct operational decisions based on systematic analysis with rigorous attention to detail. Educational Qualifications
B.Sc degree in an Engineering discipline or equivalent. IWCF Certified at Supervisor level.
#J-18808-Ljbffr
To be the QatarEnergy Company representative on the offshore jack-up drilling rig and thereby to be responsible for all operations on the rig and to ensure they are performed in a safe and efficient manner and achieve their objectives. Direct and control operations at the rig site to ensure they are performed in accordance with QP requirements and without accidents of any kind. In particular ensure that the operations are efficiently and safely performed in compliance with the approved drilling or workover program, the Drilling Reference Manual (ORM) the Drilling Department 'Golden Rules', and that all rig site personnel are aware of and adhere to these requirements. Manage HSE at the rig site as the highest priority by demonstrating visible HSE leadership and an unrelenting commitment to a safe working environment. This shall include: Participating in the Drilling Contractors 'STOP' program to identify unsafe conditions or procedures, performing at least one full 'STOP' walkabout per week and encouraging active participation by all Service Company personnel in the STOP program to eliminate accidents before they occur. Report all HSE incidents in a timely and accurate manner using the SAP system, and lead the initial on-site investigation of all incidents and near misses, to identify and document the sequence of events and immediate causes of the incident as quickly as possible. Resolve operational problems as they arise within the framework of the QP policies and standards, and ensure that non-routine or unforeseen activities are always meticulously planned and organized to identify potential hazards and to mitigate risks. Review the drilling or workover program prior to the start of operations to ensure that the equipment and personnel on the rig are capable to perform the work and that there are no errors or anomalies in the program. Report all daily activities and enter well data and cost information in Open-Wells, to ensure complete and correct record of activities with accurate cost information for future analysis and performance improvement. Manage the bi-weekly BOP pressure and function test, and sign-off the test record and pressure charts. Verify the correct BOP certification is available at the rig site, to ensure the integrity of this critical equipment in accordance with QP standards. Manage rig operations by planning and prioritizing activities, and making written instructions for the Drilling Contractor OIM and service Company representatives, to ensure that the program objectives are achieved in an efficient and timely manner and within budget. Provide written handover to back-to-back DSV and maintain a record of lessons learned and improvement opportunities, to facilitate continuous performance improvement. Supervise and monitor all QP Contractors involved in the rig operations, to ensure a high quality of work is performed in accordance with QP requirements. This shall include assessing and documenting service quality, verifying certification, and compliance documents for all equipment and chemicals delivered to the rig site. Monitor, train and support new QP graduate engineers. This shall include assigning specific tasks to broaden the learning process to ensure effective on-the-job training and development of Qatari nationals. Required Experience and Skills
At least 10 years experience in drilling operations including 5 years as an Offshore Drilling Supervisor. Experience in workover operations in gas and horizontal wells is preferred. Strong leadership and people management skills with a good awareness of cultural sensitivities. Excellent communication skills in English (demonstrated verbal and written skills). Commitment and passion for managing HSE. Energy and enthusiasm to deliver the targets in an efficient and problem-free manner. Ability to make the correct operational decisions based on systematic analysis with rigorous attention to detail. Educational Qualifications
B.Sc degree in an Engineering discipline or equivalent. IWCF Certified at Supervisor level.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
1
Drilling or Workover Supervisor
Doha, Doha
Fircroft
Posted 6 days ago
Job Viewed
Job Description
Our client, one of the world`s largest Oil and Gas Operating Companies are looking to appoint a Drilling or Workover Supervisor to work with their team in Qatar. The successful candidate will be the company representative on the drilling or workover rig to ensure operations are performed to the required standards.
Key Responsibilities:
* Direct and control operations at the rig site to ensure they are carried out safely and in compliance with the approved drilling and workover programme.
* Manage HSE at the rig site.
* Resolve any operational problems as required.
* Review the drilling or workover programme prior to the start of operations to ensure all equipment and personnel are ready.
* Report all daily activities and enter well data and cost information in to Open Wells.
* Witness the BOP pressure and function tests.
* Plan and prioritise rig activities and allocate resources accordingly.
* Supervise all contractors involved in rig operations.
* Mentor and train junior engineers.
Key skills / attributes:
* Degree qualified (or substantial relevant experience as DSV)
* IWCF Certified at Supervisor level
* Circa 15 years experience in drilling operations with 8 as Drilling Supervisor
* Demonstrable leadership and people management skills
* Excellent communication and reporting skills
Remuneration:
Attractive tax free salary with expat benefits package, relocation if required, and exceptional career progression opportunities.
* Degree qualified (or substantial relevant experience as DSV)
* IWCF Certified at Supervisor level
* Circa 15 years experience in drilling operations with 8 as Drilling Supervisor
* Demonstrable leadership and people management skills
* Excellent communication and reporting skills
About The Company
Fircroft is one of the world’s leading providers of solutions to specialist technical industries. The company was founded in 1970 to provide services to companies in the Oil & Gas sector.
We currently deliver professional services contracts on a preferred or sole supply basis with some of the world’s largest energy companies.
This advertiser has chosen not to accept applicants from your region.
2
Drilling or Workover Supervisor
Doha, Doha
Fircroft
Posted 6 days ago
Job Viewed
Job Description
Our client, one of the world`s largest Oil and Gas Operating Companies are looking to appoint a Drilling or Workover Supervisor to work with their team in Qatar. The successful candidate will be the company representative on the drilling or workover rig to ensure operations are performed to the required standards.
Key Responsibilities: * Direct and control operations at the rig site to ensure they are carried out safely and in compliance with the approved drilling and workover programme. * Manage HSE at the rig site. * Resolve any operational problems as required. * Review the drilling or workover programme prior to the start of operations to ensure all equipment and personnel are ready. * Report all daily activities and enter well data and cost information in to Open Wells. * Witness the BOP pressure and function tests. * Plan and prioritise rig activities and allocate resources accordingly. * Supervise all contractors involved in rig operations. * Mentor and train junior engineers.
Key skills / attributes: * Degree qualified (or substantial relevant experience as DSV) * IWCF Certified at Supervisor level * Circa 15 years experience in drilling operations with 8 as Drilling Supervisor * Demonstrable leadership and people management skills * Excellent communication and reporting skills
Remuneration: Attractive tax free salary with expat benefits package, relocation if required, and exceptional career progression opportunities. * Degree qualified (or substantial relevant experience as DSV) * IWCF Certified at Supervisor level * Circa 15 years experience in drilling operations with 8 as Drilling Supervisor * Demonstrable leadership and people management skills * Excellent communication and reporting skills About The Company Fircroft is one of the world’s leading providers of solutions to specialist technical industries. The company was founded in 1970 to provide services to companies in the Oil & Gas sector.
We currently deliver professional services contracts on a preferred or sole supply basis with some of the world’s largest energy companies.
#J-18808-Ljbffr
Key Responsibilities: * Direct and control operations at the rig site to ensure they are carried out safely and in compliance with the approved drilling and workover programme. * Manage HSE at the rig site. * Resolve any operational problems as required. * Review the drilling or workover programme prior to the start of operations to ensure all equipment and personnel are ready. * Report all daily activities and enter well data and cost information in to Open Wells. * Witness the BOP pressure and function tests. * Plan and prioritise rig activities and allocate resources accordingly. * Supervise all contractors involved in rig operations. * Mentor and train junior engineers.
Key skills / attributes: * Degree qualified (or substantial relevant experience as DSV) * IWCF Certified at Supervisor level * Circa 15 years experience in drilling operations with 8 as Drilling Supervisor * Demonstrable leadership and people management skills * Excellent communication and reporting skills
Remuneration: Attractive tax free salary with expat benefits package, relocation if required, and exceptional career progression opportunities. * Degree qualified (or substantial relevant experience as DSV) * IWCF Certified at Supervisor level * Circa 15 years experience in drilling operations with 8 as Drilling Supervisor * Demonstrable leadership and people management skills * Excellent communication and reporting skills About The Company Fircroft is one of the world’s leading providers of solutions to specialist technical industries. The company was founded in 1970 to provide services to companies in the Oil & Gas sector.
We currently deliver professional services contracts on a preferred or sole supply basis with some of the world’s largest energy companies.
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
3
Fitters - Oil & Gas
Doha, Doha
Valerian Trading &Contracting Co.
Posted today
Job Viewed
Job Description
**! Urgent Requirement !**
**Immediate Hiring**
**Fitters - Oil & Gas**
**Minimum 2-5 Years of Experience is required**
**ITI, Industrial or vocational training is required**
**Should be available for immediate joining**
**Should have experience with equipments.**
**Should have Valid** **QID**
**Job Types**: Full-time, Contract
Ability to commute/relocate:
- Doha: Reliably commute or planning to relocate before starting work (required)
Application Question(s):
- Are you Currently Working?
- How soon can you join?
**Experience**:
- Fitter - Oil & Gas: 2 years (preferred)
**Immediate Hiring**
**Fitters - Oil & Gas**
**Minimum 2-5 Years of Experience is required**
**ITI, Industrial or vocational training is required**
**Should be available for immediate joining**
**Should have experience with equipments.**
**Should have Valid** **QID**
**Job Types**: Full-time, Contract
Ability to commute/relocate:
- Doha: Reliably commute or planning to relocate before starting work (required)
Application Question(s):
- Are you Currently Working?
- How soon can you join?
**Experience**:
- Fitter - Oil & Gas: 2 years (preferred)
This advertiser has chosen not to accept applicants from your region.
4
Welder - Oil & Gas
Doha, Doha
Valerian Trading &Contracting Co.
Posted today
Job Viewed
Job Description
**! Urgent Requirement !**
**Immediate Hiring**
**Welder - Oil & Gas**
**Minimum 2-5 Years of Experience is required**
**ITI, Industrial or vocational training is required**
**Should be available for immediate joining**
**Should have experience with equipments.**
**Should have Valid** **QID**
**Job Types**: Full-time, Contract
Ability to commute/relocate:
- Doha: Reliably commute or planning to relocate before starting work (required)
Application Question(s):
- Are you Currently Working?
- How soon can you join?
**Experience**:
- Fitter - Oil & Gas: 2 years (preferred)
**Immediate Hiring**
**Welder - Oil & Gas**
**Minimum 2-5 Years of Experience is required**
**ITI, Industrial or vocational training is required**
**Should be available for immediate joining**
**Should have experience with equipments.**
**Should have Valid** **QID**
**Job Types**: Full-time, Contract
Ability to commute/relocate:
- Doha: Reliably commute or planning to relocate before starting work (required)
Application Question(s):
- Are you Currently Working?
- How soon can you join?
**Experience**:
- Fitter - Oil & Gas: 2 years (preferred)
This advertiser has chosen not to accept applicants from your region.
5
Legal Counsel- Oil & Gas
Thomson Legal
Posted 11 days ago
Job Viewed
Job Description
Exceptional new role for a lawyer with Oil & Gas/ Energy experience to join the in-house legal team of a leading international energy company based in their offices in Qatar.
Role Profile:
- Provides full range of commercial and corporate legal services, in the area of operated activities to meet the needs of the Company and protect its legal and commercial interests, including detailed advice and guidance to colleagues on specific matters based on a full understanding of the topic and detailed options and consequences to enable the client to take the optimum legal and commercial decision.
- Drafts and negotiates a wide variety of international legal agreements and contracts to comply with applicable laws, meets the needs of clients and protects the Group’s legal and commercial interests.
- Co-ordinates and prioritizes a large and varied workload, managing large amounts of documentation and securing inputs from multiple sources of varying disciplines to ensure that projects are satisfactorily completed on time and within applicable budgets.
- The Legal Counsel focuses all talent and energy on the Company to make sure that all its activities adhere to law and the relevant agreements by giving legal advice and monitoring all
- applicable legal aspects.
- Knowledge and observance of Company’s HSE policy, rules and procedures.
- Participation to HSE activities and global improvement.
- Follows up/analysis of HSE legal framework in Qatar.
- Participation in company Emergency Management Team activities (including participation inexercises and taking turn of the Legal duty phone on rota).
Required Qualifications:
- Must hold a current practicing certificate (preferable in a Commonwealth Jurisdiction)- the company are particularly interested in UK qualified lawyers.
Required Experience:
- Significant experience of providing legal support to a contracts & procurement / sourcing division: covering preparation of call for tender, supplier due diligence, negotiation, contract drafting / preparation and review, drafting and reviewing contractual correspondence (to be sent and received by company).
- Experience supporting activities related to engineering & construction, logistics, drilling & wells services, reservoirs & geoscience, marine/vessels, field operations, technical services/manpower, IT and compliance is desirable.
- Experience of reviewing supplier insurances, drafting and improving standard template contracts, letters, amendments, guarantees etc. is desirable.
- Experience supporting other business areas such as human resources, finance, and audit etc. would be advantageous.
- Experience with access & indemnity / crossing agreements, offshore construction (EPC style contracts), seismic, and drilling projects would be advantageous.
- Experience with disputes and settlements would be advantageous.
- Experience of providing / assisting with training on legal issues would be advantageous.
On Offer:
On offer is a highly competitive package including salary, housing allowance, travelallowance, relocation and bonus.
To Apply:
For a confidential discussion about this position or to apply, please contact:
David Thomson, Director
Telephone: +44 (0)
Email:
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
Be The First To Know
About the latest Drilling supervisor Jobs in Qatar !
6
Head, Commissioning - Oil & Gas
Doha, Doha
Bounty Hunter World
Posted 6 days ago
Job Viewed
Job Description
mselect is looking to hire a Head, Commissioning for a oil and gas operator in Doha, Qatar . Candidates must have a minimum of 15 years overall experience in logistics management and commissioning execution of multi-discipline offshore projects. Fluency in English is a must.
Key Responsibilities
- The focal point is responsible, and accountable for the day-to-day functioning of the Commissioning engineering, pre-commissioning, and commissioning of the Redevelopment Project to ensure that the project is commissioned and tested in accordance with the approved Scope of Work, approved drawings, engineering design and safety, environment and standards & specifications
- Act as an interface between EPIC contractor and asset holder representative to Manage all aspects of commissioning from engineering till hand-over Guide commissioning staff and Contractor to ensure that all commissioning activities from pre-FEED till handover are executed in accordance with approved method statements complying with project schedule, quality and HSE requirements
- The position has overall responsibility and accountability to ensure that the multi-discipline commissioning of the MM Redevelopment project is executed in accordance with the project scope of work, Standards and standards and specification
- Participate in all phases of the project from pre-bid till hand-over to asset holder
- Manage and guide the contractor during engineering, review, comment and approve contractor deliverables in PDMS
- Attend engineering workshops such as Constructability Review, SIMOPS, Schedule Risk Analysis, 3D Model Reviews, and HAZOP and provide inputs to ensure that these workshops comply with requirements
- Ensure the Contractor executes the mechanical completion, pre-commissioning, commissioning start-up, and hand-over in accordance with the requirements
- Responsible and accountable for commissioning execution from start to end including Commissioning Engineering, Preparation, Detail Engineering, Mechanical Completion, Commissioning and Hand-over
- Monitor, control and report Contractor’s performance, man-power deployment, plant and equipment movements, construction slippages etc
- Act as a Risk Management representative to identify Commissioning Risk events, the effects & consequences, propose mitigation measures and take ownership to ensure mitigation measures have been implemented at the site
- Liaise with commissioning heads in operations (OV) through all phases of the project for all commissioning-related matters including inputs during the detailed engineering and procurement stages
- Coordinate mobilisation and demobilisation of contractors, sub-contractors and vendors to offshore sites following the contract award
- Interact and interface with other contractors, projects, and departments regularly to identify and resolve all construction-related matters especially liaison with Production and Maintenance departments
- Participate in weekly and monthly HSE walkthroughs and monthly HSE audits
- Efficiently manage a team of commissioning and logistics staff, develop capabilities and train
Requirements
- BSc in Mechanical Engineering discipline from a recognized University (or) Petroleum Engineering discipline or equivalent plus relevant courses in Safety, Quality Control and Construction
- Candidate should have a minimum of 15 years overall experience in logistics management and commissioning execution of multi-discipline offshore projects
- Candidate must have robust experience in FEED and EPIC projects with a strong capability to review/approve contractor deliverables
- Computer literate Good communication and interpersonal skills
- Excellent command of English (oral and written)
- Excellent knowledge of industry engineering standards, quality control, safety and environmental awareness
- Excellent ability to interpret and review method statements, inspection and test plans, construction schedules and drawings
- Ability to highlight potential bottlenecks/problems and ability to suggest solutions
- Ability to supervise a multi- and multi-cultural contractor workforce
*Only applicants meeting the strict criteria outlined above will be contacted as part of the shortlisting process.
Bounty Hunter World
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
7
Inspections Supervisor (Oil & Gas)
Doha, Doha
Apave International
Posted 9 days ago
Job Viewed
Job Description
Job Duties/Roles
- Provide visible leadership in service delivery in TPI services to area clients and on behalf of global clients
- Responsible for supporting the day-to-day operation and business planning, budgeting, order fulfillment, customer relationships, and promoting continuous improvement of the business.
- Regular forecasting required by the financial timetable, such as monthly finance reporting
- Supports the development of business planning and related annual operating budget for the business.
- Keeps the BUM informed on a regular basis of the performance of the business
- Develop and tracks metrics that address business performance against the business plan. These metrics should address financial measures, customer service delivery measures, internal business process measures and business gains and losses
- Coach, mentor and develop employees to support the enterprise and succession.
- Responsible for day-to-day activities within Qatar region, as well as for maintenance of quality, content, consistency and continuity of work performed, in accordance with established APAVE TIV Group policies, procedures and standards under the direction of the Business Unit Manger.
- Providing advanced level of operational technical/clerical support within the department. Uses independent judgment in carrying out responsibilities and takes initiative to handle routine and semi-routine matters.
- Responsible for ensuring that the structures, processes and procedures in the delivery service are coordinated, optimized, and effective in meeting the business/commercial requirements for both internal and external clients
- Preparation of Tender/the quotation, scheduling, inter-department project relationships and interactions, and performing non-department specific project tasks.
- Assists in the development of short- and long-range business plans and related annual operating and capital expense budgets.
- Resolve work related client issues including scope of work, quality of work and billing.
- Stays actively informed concerning business and management developments affecting present and potential customers of assigned region. Ensure that appropriate action is taken to capitalize on marketing opportunities as they present themselves.
- Assists in the development of short- and long-range manpower needs based on the projected business climate in order to ensure that qualified, trained staff are available as needs arise.
- Ensures that the staff is organized and staffed appropriately to carry out the business plan and budget, as approved, in accordance with established policies, procedures and standards.
- Ensure that APAVE TIV Quality System requirements with regard to work within the region are fulfilled.
- Keeps informed of the product and service capabilities of the APAVE TIV Services, identifies improvement and developmental needs, takes action to capitalize on prospective market opportunities, and makes recommendations for technology or technical tools and manpower skills necessary to implement new and improved products and services.
- Monitors the delivery and quality of services to customers in terms of customer satisfaction.
- Actively promotes the services and capabilities of APAVE TIV Services to customers and monitors the execution of similar activities by subordinates.
- Monitors the utilization of the staff within assigned region on billable and essential non-billable work. Take appropriate action to relieve workload imbalances and monitor over- or under-utilization of staff.
- May serve as Account Manager to designated customers and potential customers and actively promotes the services and capabilities of APAVE TIV Services throughout the business community.
- Obtain market information from employees and clients that can be used to increase workload.
- Any adhoc duties as assigned by supervisor.
- Follow up of AR with the clients and provide regular update to the Manager.
- Develops and maintains Project Tracking database
Knowledge, Skills and Abilities Required (KSAR)
- Strong customer service skills: value customers and communicates with them in a professional manner.
- Knowledge of various service lines of APAVE TIV Group and various industries that APAVE TIV Group offers services , financial and billing procedures reporting and budget management.
- Must be knowledgeable in various aspects of the business such as billing, finance and employee management.
- Must have the ability to compose, submit and execute best practice initiatives.
- Must meet deadlines for reporting, performance evaluations, weekly reports, other special projects as identified by senior management.
- Must have excellent communication skills with the ability to interact with each level of personnel.
- Proficiency in Microsoft Office Suite is required, with strong skills in MS Excel, Word, PowerPoint.
- Detail-oriented and well organized with strong leadership skills including the capability to drive improvement and challenge the status quo.
- Working knowledge of the APAVE TIV Group Health, Safety, Quality and Environmental Management System.
Minimum years of Experience
Fifteen or more years of experience in the field with 5 years on senior position preferred
Required/Preferred Education Requirements
Typically requires a degree or equivalent from an institution recognized within a relevant field of engineering or physical science (a minimum three (3) or four (4) year program depending on local education system) and proficiency in the English language
Required/Preferred Professional Requirements
CSWIP 3.2.22 / QMS Trainings
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
8
Head, Commissioning - Oil & Gas
Doha, Doha
Bounty Hunter World
Posted 6 days ago
Job Viewed
Job Description
mselect
is looking to hire a
Head, Commissioning
for a oil and gas operator in
Doha, Qatar . Candidates must have a minimum of 15 years overall experience in logistics management and commissioning execution of multi-discipline offshore projects. Fluency in English is a must. Key Responsibilities The focal point is responsible, and accountable for the day-to-day functioning of the Commissioning engineering, pre-commissioning, and commissioning of the Redevelopment Project to ensure that the project is commissioned and tested in accordance with the approved Scope of Work, approved drawings, engineering design and safety, environment and standards & specifications Act as an interface between EPIC contractor and asset holder representative to Manage all aspects of commissioning from engineering till hand-over Guide commissioning staff and Contractor to ensure that all commissioning activities from pre-FEED till handover are executed in accordance with approved method statements complying with project schedule, quality and HSE requirements The position has overall responsibility and accountability to ensure that the multi-discipline commissioning of the MM Redevelopment project is executed in accordance with the project scope of work, Standards and standards and specification Participate in all phases of the project from pre-bid till hand-over to asset holder Manage and guide the contractor during engineering, review, comment and approve contractor deliverables in PDMS Attend engineering workshops such as Constructability Review, SIMOPS, Schedule Risk Analysis, 3D Model Reviews, and HAZOP and provide inputs to ensure that these workshops comply with requirements Ensure the Contractor executes the mechanical completion, pre-commissioning, commissioning start-up, and hand-over in accordance with the requirements Responsible and accountable for commissioning execution from start to end including Commissioning Engineering, Preparation, Detail Engineering, Mechanical Completion, Commissioning and Hand-over Monitor, control and report Contractor’s performance, man-power deployment, plant and equipment movements, construction slippages etc Act as a Risk Management representative to identify Commissioning Risk events, the effects & consequences, propose mitigation measures and take ownership to ensure mitigation measures have been implemented at the site Liaise with commissioning heads in operations (OV) through all phases of the project for all commissioning-related matters including inputs during the detailed engineering and procurement stages Coordinate mobilisation and demobilisation of contractors, sub-contractors and vendors to offshore sites following the contract award Interact and interface with other contractors, projects, and departments regularly to identify and resolve all construction-related matters especially liaison with Production and Maintenance departments Participate in weekly and monthly HSE walkthroughs and monthly HSE audits Efficiently manage a team of commissioning and logistics staff, develop capabilities and train Requirements BSc in Mechanical Engineering discipline from a recognized University (or) Petroleum Engineering discipline or equivalent plus relevant courses in Safety, Quality Control and Construction Candidate should have a minimum of 15 years overall experience in logistics management and commissioning execution of multi-discipline offshore projects Candidate must have robust experience in FEED and EPIC projects with a strong capability to review/approve contractor deliverables Computer literate Good communication and interpersonal skills Excellent command of English (oral and written) Excellent knowledge of industry engineering standards, quality control, safety and environmental awareness Excellent ability to interpret and review method statements, inspection and test plans, construction schedules and drawings Ability to highlight potential bottlenecks/problems and ability to suggest solutions Ability to supervise a multi- and multi-cultural contractor workforce *Only applicants meeting the strict criteria outlined above will be contacted as part of the shortlisting process. Bounty Hunter World
#J-18808-Ljbffr
is looking to hire a
Head, Commissioning
for a oil and gas operator in
Doha, Qatar . Candidates must have a minimum of 15 years overall experience in logistics management and commissioning execution of multi-discipline offshore projects. Fluency in English is a must. Key Responsibilities The focal point is responsible, and accountable for the day-to-day functioning of the Commissioning engineering, pre-commissioning, and commissioning of the Redevelopment Project to ensure that the project is commissioned and tested in accordance with the approved Scope of Work, approved drawings, engineering design and safety, environment and standards & specifications Act as an interface between EPIC contractor and asset holder representative to Manage all aspects of commissioning from engineering till hand-over Guide commissioning staff and Contractor to ensure that all commissioning activities from pre-FEED till handover are executed in accordance with approved method statements complying with project schedule, quality and HSE requirements The position has overall responsibility and accountability to ensure that the multi-discipline commissioning of the MM Redevelopment project is executed in accordance with the project scope of work, Standards and standards and specification Participate in all phases of the project from pre-bid till hand-over to asset holder Manage and guide the contractor during engineering, review, comment and approve contractor deliverables in PDMS Attend engineering workshops such as Constructability Review, SIMOPS, Schedule Risk Analysis, 3D Model Reviews, and HAZOP and provide inputs to ensure that these workshops comply with requirements Ensure the Contractor executes the mechanical completion, pre-commissioning, commissioning start-up, and hand-over in accordance with the requirements Responsible and accountable for commissioning execution from start to end including Commissioning Engineering, Preparation, Detail Engineering, Mechanical Completion, Commissioning and Hand-over Monitor, control and report Contractor’s performance, man-power deployment, plant and equipment movements, construction slippages etc Act as a Risk Management representative to identify Commissioning Risk events, the effects & consequences, propose mitigation measures and take ownership to ensure mitigation measures have been implemented at the site Liaise with commissioning heads in operations (OV) through all phases of the project for all commissioning-related matters including inputs during the detailed engineering and procurement stages Coordinate mobilisation and demobilisation of contractors, sub-contractors and vendors to offshore sites following the contract award Interact and interface with other contractors, projects, and departments regularly to identify and resolve all construction-related matters especially liaison with Production and Maintenance departments Participate in weekly and monthly HSE walkthroughs and monthly HSE audits Efficiently manage a team of commissioning and logistics staff, develop capabilities and train Requirements BSc in Mechanical Engineering discipline from a recognized University (or) Petroleum Engineering discipline or equivalent plus relevant courses in Safety, Quality Control and Construction Candidate should have a minimum of 15 years overall experience in logistics management and commissioning execution of multi-discipline offshore projects Candidate must have robust experience in FEED and EPIC projects with a strong capability to review/approve contractor deliverables Computer literate Good communication and interpersonal skills Excellent command of English (oral and written) Excellent knowledge of industry engineering standards, quality control, safety and environmental awareness Excellent ability to interpret and review method statements, inspection and test plans, construction schedules and drawings Ability to highlight potential bottlenecks/problems and ability to suggest solutions Ability to supervise a multi- and multi-cultural contractor workforce *Only applicants meeting the strict criteria outlined above will be contacted as part of the shortlisting process. Bounty Hunter World
#J-18808-Ljbffr
This advertiser has chosen not to accept applicants from your region.
9