52 Inspection jobs in Qatar

Participate in technical reviews regarding Maintainability & Inspectability of installations during pre-feed, feed, and detailed engineering.
- Throughout the project, ensure Inspection and Integrity Engineering activities are performed in line with Maintenance & Inspection Engineering contract (MIEC).

**About this role**
- HSEQ responsibilities:

- Ensure compliance with NOC Incident Free Culture, Health and Safety and Environment Policy.
- Support and enforce the Project HSEQ Management System (Charters, Objectives, Directives, Plans, Procedures and Specifications etc.).
- Promotes HSEQ awareness of workforce at all levels through proactive attitude - Site Tour Management at Contractor Yard / Premises, HSEQ Meetings ensuring risks are identified, actions assigned and managed within Project Team and Contractors.
- Monitor work activities, especially areas where unsafe acts could occur and ensure that risks have been properly identified and assessed prior to work execution (Job Safety Analysis).
- Ensure that potential failures, weaknesses, and hazards are immediately reported.
- During Basic Engineering Phases
- Participate to the preparation of Scope of Work (SOW) for the MIEC contract.
- Prepare answers to bidders’ technical clarifications.
- Attends meetings/reviews as required to ensure inspectability and operability are considered.
- MIEC General Responsibilities:

- Review the Inspection deliverables issued by the MIE Project Contractor.
- Attend weekly and monthly meetings, following progress and taking decisions.
- Participate to the closure of all actions related to Inspection.
- Assist MIE Contractor Work Package Leaders to ensure compliance with project specifications.
- Participate to Inspection and Integrity MIEC workshops with Company Stakeholders to ensure alignment.
- Support the MIEC contractor, by working with EPCIC / Project to make sure they are aware of any overdue documents that will have a financial impact on MIEC Activities.
- MIEC Technical Responsibilities:

- Focus on Inspectability aspects including handling and transfers.
- Review documentation from both EPCIC and Project if required and provide feedback in a timely manner.
- Participate in RBI studies or equivalent to ensure Inspection requirements are properly addressed.
- Ensure the mass loading of PM data into the CMIMS.
- Review and validate the Inspection dossiers prepared by MIEC.
- Review technical drawings as required and provide feedback, using company EDMS (MANASA).
- Participate in the resolution of clarifications or requests raised by the MIE Contractor.
- Participation to FATs and design reviews as required.
- Drive the implementation of digitalized solutions for baseline enactment.
- Coordinate and deliver MIEC offshore scopes. This will include managing sub-contractor inspection teams.
- Project responsibilities:

- Provide support as required to commissioning activities.
- Ad-hoc activities as required by line manager.
- All staff must be willing to participate in Crisis Response Training and to assist during Emergency Response Situations if required.

**What you need to bring**
- Bachelor’s degree or equivalent in engineering.
- Minimum 3-8 years’ experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering role.
- Experience with CMIMS.
- Detailed knowledge of legislation/regulations relevant to inspection discipline.
- Familiar with NOC standards, MANASA and relevant codes and standards.
- Medically fit to travel to offshore Oil & Gas platform.
- H2S OPITO and T-BOSIET certification.

**Benefits**
- ** Salary**:

- Day Rate in USD Plus Allowance
- ** Work Schedule**:

- 9 Hours / 6 Days
- ** Duration**:

- 31-MAR-2026, renwable
- ** Location**:

- Qatar

Academic Bachelor

Overview

To coordinate and supervise drone inspections in support of all companies working within the entire energy sector for the State of Qatar (Onshore and offshore, QatarEnergy, JV and other companies e.g. Qchem, Woqod etc.) for Engineering Inspection, advanced 3D modelling of plant and facilities including emergency inspection where necessary.

Experience

• 5 years' oil and gas experience in logistics or engineering disciplines
• Demonstrated understanding of the regulations, operating requirements, and procedures for safely flying drones.
• Well organized with specific planning skills.
• Strong analytical skills.
• A knowledge of Support vessel operations and procedures

Qualifications

• Bachelor's Degree in a business, engineering or aviation field of study
• Fluent (level 6) in English both Verbal and Written
• Certified in Dangerous Goods by Sea.
• To be competent with Windows MS Word and Excel programs.

#J-18808-Ljbffr

Overview To coordinate and supervise drone inspections in support of all companies working within the entire energy sector for the State of Qatar (Onshore and offshore, QatarEnergy, JV and other companies e.g. Qchem, Woqod etc.) for Engineering Inspection, advanced 3D modelling of plant and facilities including emergency inspection where necessary. Experience 5 years' oil and gas experience in logistics or engineering disciplines Demonstrated understanding of the regulations, operating requirements, and procedures for safely flying drones. Well organized with specific planning skills. Strong analytical skills. A knowledge of Support vessel operations and procedures Qualifications Bachelor's Degree in a business, engineering or aviation field of study Fluent (level 6) in English both Verbal and Written Certified in Dangerous Goods by Sea. To be competent with Windows MS Word and Excel programs.

#J-18808-Ljbffr

**Company**
QatarEnergy is an integrated national oil corporation that stands at the forefront of efforts for the long term sustainable

development,utilization and monetization of oil and gas resources in the State of Qatar. In its efforts to become one of the

best national energy companies in the world, QatarEnergy's activities and those of its subsidiaries and joint ventures,

encompass the entire spectrum of the oil and gas value chain locally, regionally, and internationally. They include the

exploration, refining and production, marketing, and sale of oil and gas, liquefied natural gas (LNG), natural gas

liquids(NGL), gas to liquids (GTL) products, refined products, petrochemicals,fertilizers, steel and aluminum. As an

integrated corporation,QatarEnergy's activities also include marketing and sale of oil and gas and other various products.

QatarEnergy's operations and activities are conducted at various onshore locations, including Doha, Dukhan and the

Mesaieed and Ras Laffan Industrial Cities; and at various offshore areas, such as offshore oilfields production stations,

drilling platforms, Halul oil export island,and the North Field, which is the largest single non-associated gas reservoir in the

world covering an area of 6,000 square kilometers. The utilization of this field’s massive reserves has become a primary

national goal to continue the development and prosperity of the country. QatarEnergy pays the utmost attention to the

health and safety of its employees, contractors, visitors and the local communities where it operates. From drilling to

construction, operations to decommissioning,QatarEnergy's health, safety and environment policy forms an integral part of

the corporation’s daily business and long term planning. QatarEnergy is committed to contribute to a better future by

meetingtoday’s economic needs, while safeguarding our environment and resources for generations to come. Thriving on

innovation and excellence,QatarEnergy is bound to the highest levels of sustainable human, socio-economic, and

environmental development in Qatar and beyond.

**Department**
JOINT SERVICES OPERATIONS

**Primary purpose of job**
To coordinate and supervise drone inspections in support of all companies working within the entire energy sector for the

State of Qatar (Onshore and offshore, QatarEnergy, JV and other companies e.g. Qchem, Woqod etc.) for Engineering

Inspection, advanced 3D modeling of plant and facilities including emergency inspection where necessary.

**Experience & Skills**:

- Fluent (level 6) in English both Verbal and Written
- Demonstrated understanding of the regulations, operating requirements, and procedures for safely flying drones.
- Certified in Dangerous Goods by Sea.
- Well organized with specific planning skills.
- Strong analytical skills.
- A knowledge of Support vessel operations and procedures
- To be competent with Windows MSword and Excel programs.

**Education**:

- Bachelor’s Degree in a business, engineering or aviation field of study
- 5 years’ oil and gas experience in logistics or engineering disciplines

Bachelor of Business Administration(Management) Nationality Any Nationality Vacancy 1 Vacancy Job Description The

Munitions Inspection Element Supervisor

position is for an individual who is identified as a highly experienced Supervisor responsible for the effective management of the assigned Element in accordance with established safety, technical, operational accountability standards and PWS contractual requirements. This position is the technical expert and advisor for the USAF Munitions Surveillance Program (MSP). Operates Theater Integrated Combat Munitions System (TICMS). Also performs surveillance inspections of munitions to determine and identify serviceability, potential hazards and possible deterioration. Ensures compliance with Performance Work Statement (PWS) and Amentum ISO 9001 Quality Management System (QMS). Principal Accountabilities Manages and is responsible for all assigned personnel and equipment in the Element, ensuring maximum utilization and conservation of resources. Manages the Element according to the applicable sections of AFMAN 21-200, DAFMAN 21-201and Munitions SOP. In the event of an emergency, takes necessary control and timely response actions. Enforces strict adherence of all applicable directives; i.e, technical, safety, security, quality. Implements timely corrective actions of all discrepancies identified during internal/external audits. Develops and manages production efforts, goals and levels according to contractual requirements. Inspects munitions stockpile, facilities, tools, MMHE, support vehicles and equipment to ensure serviceability and determines causes of negative performance trends. Evaluates technical skills of personnel for conformance to established standards. Develops production schedules and goals to meet requirements of daily timelines, special taskers, special projects and contingency support. Utilizes TICMS to the maximum extent possible in all production efforts and processes. Verifies that personnel complete all accountability documentation that is an integral part of production actions and submit on a timely manner to Operations Section. Identifies and advises the Munitions Accountability Section Chief of limiting factors that may impact performance goals. Advises Munitions Accountability Section Chief about personnel performance and all production actions, to include root causes and solutions to correct negative trends in the Element's performance. Monitors the skills, proficiency of assigned personnel as it impacts production efforts. Conducts sample surveillance audits of different processes in the Element. Interfaces and coordinates with the deployed Munitions Flight management as needed. Tracks training requirements and ensures personnel receive necessary training. Ensures personnel properly utilize CTKS, special tools needs, bench stock requirements, MMHE and support equipment commensurate with production efforts. Ensures that personnel accurately calculate and observe the net explosives limits of all storage and operating locations commensurate with production actions. Verifies that visual inspections on lightning protection and static ground systems are performed and documented in accordance with applicable governing publications. Ensures Munitions Control is informed of fire symbol, hazard marker, Risk Category or classified munitions changes that effect munitions storage and maintenance facilities. May be appointed as the Senior Munitions Inspector during the incumbent's absence. Works necessary hours, to include stand-by duties, to support mission requirements during peacetime and combat contingencies. Performs other duties as assigned. Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors for extended periods. Must have intermediate level knowledge of the USAF Supply and Tech Order systems or US service equivalent. Must have intermediate level knowledge of current MIS applicable to PGM activities. Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs. May be required to operate material handling equipment. Must possess a valid home country driver's license and ability to obtain host nation driver's license. High School diploma or equivalent required. Must have a minimum seven years of experience with Military Munitions. Must be capable attending the USAF Munitions Inspector Course. Must be eligible to obtain and maintain a US Secret Security Clearance. Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as required for task being performed. Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs. Ability to travel domestically and internationally. Must have normal color perception and depth of vision. Preferred Qualifications Preferred USAF munitions storage, maintenance, control and inspection procedures experience. Preferred TICMS, MC2, TMRS and IMDS/DPAS M&U experience for Munitions and MMHE. Preferred minimum 2 years of experience as USAF Munitions Inspector and award of Special Experience Identifier (SEI) Code 836. Company Industry Defence Military Government Department / Functional Area Administration Keywords Munitions Inspection Element Supervisor Disclaimer: Naukrigulf.com is only a platform to bring jobseekers & employers together. Applicants are advised to research the bonafides of the prospective employer independently. We do NOT endorse any requests for money payments and strictly advice against sharing personal or bank related information. We also recommend you visit Security Advice for more information. If you suspect any fraud or malpractice, email us at People Looking for Inspection Supervisor Jobs also searched #J-18808-Ljbffr

**About this role**
- 1.Provides mechanical engineering expertise, design knowledge, quality assurance, and leadership in supervising and administering Mechanical team output in accordance with project deliverables and execution schedule;
- Directs the preparation and stewardship of mechanical engineering scope of work in ESW/EPC contract, advises and recommends design processes, proven technologies and alternative studies to optimise project cost and schedule;
- Maintains close liaison with members of Engineering Team and alignment with the Engineering Manager on mechanical engineering needs, objectives, and requirements;
- Accountable for ensuring execution of work is technically aligned and in compliance with COMPANY Operations, Policies, Standards of Business Conduct and COMPANY Project Management System (COMPANYPMS);
- Manages ESW/EPC Contractor's mechanical engineering activities including validation of resources, personnel qualifications and experience; usage of appropriate design tools/computer hardware/software; adherence to project objectives, requirements, specifications, standards, and design verification processes;
- Assesses and validates ESW/EPC Contractor’s capability in providing all technical documents, progress measurement and reporting and recommends additional technical support to address gaps;
- Manages the discipline deliverables and field engineering inspection in support of fabrication and construction activities;
- Responsible for the mechanical engineering schedule related milestones, provides data (narrative, charts, graphs, change management recommendations) and recovery plans to address any schedule delays if any;
- Accountable for knowledge of and sharing previous lessons learned, capturing and communicating current lessons learned to support review teams and future projects;
- Review, update and amend procedures and specifications to ensure that all Mechanical engineering references are up to date and relevant.

**What you need to bring**
- Bachelor Degree in Mechanical Engineering or equivalent;
- 15 years’ experience as a Mechanical Engineer and atleast 5 years as Lead level with a broad knowledge of engineering execution including design standards, specifications, codes, safety criteria in Mechanical Equipment Inspection;
- LNG onshore experience is preferred.

Academic Bachelor

Industry: Oil & Gas
City/Country: Doha, Qatar
Location: Doha

Our client, world's largest Oil & Gas company, is urgently looking for a **"Head Mechanical Equipment Inspection" **willing to work under the following conditions for an upcoming project:
**Terms and Conditions**

Work Location: Qatar Onshore

Contract duration: 24 Months - 2 Years

Working Schedule: 10 hrs./day - 6 days/week - 26 days/month

Mob/demob ticket: Provided

Medical Insurance: Provided
**With Minimum Requirement**
**Qualifications**
- Bachelor's Degree in mechanical engineering or equivalent.
**Knowledge and/or Experience**
- 15 years' experience as a Mechanical Engineer and atleast 5 years as Lead level with a broad knowledge of engineering execution including design standards, specifications, codes, safety criteria in Mechnical Equipment Inspection.
- LNG onshore experience is preferred.
**Technical and Business Skills**
- Excellent written and oral English skills.
- Strong organisational, planning and coordination skills.
- Strong technical, prioritisation and management skills.
- Good communication, influencing and interface skills.
- Proficient in Microsoft Office suite of software programs, etc.
**Key Job Accountabilities**:

- Provides mechanical engineering expertise, design knowledge, quality assurance, and leadership in supervising and administering Mechanical team output in accordance with project deliverables and execution schedule.
- Directs the preparation and stewardship of mechanical engineering scope of work in ESW/EPC contract, advises and recommends design processes, proven technologies and alternative studies to optimise project cost and schedule.
- Maintains close liaison with members of Engineering Team and alignment with the Engineering Manager on mechanical engineering needs, objectives, and requirements.
- Accountable for ensuring execution of work is technically aligned and in compliance with Company Operations, Policies, Standards of Business Conduct and Company Project Management System (COMPANYPMS).
- Manages ESW/EPC Contractor's mechanical engineering activities including validation of resources, personnel qualifications and experience; usage of appropriate design tools/computer hardware/software; adherence to project objectives, requirements, specifications, standards, and design verification processes.
- Assesses and validates ESW/EPC Contractor's capability in providing all technical documents, progress measurement and reporting and recommends additional technical support to address gaps.
- Manages the discipline deliverables and field engineering inspection in support of fabrication and construction activities.
- Responsible for the mechanical engineering schedule related milestones, provides data (narrative, charts, graphs, change management recommendations) and recovery plans to address any schedule delays if any.
- Accountable for knowledge of and sharing previous lessons learned, capturing and communicating current lessons learned to support review teams and future projects.
- Review, update and amend procedures and specifications to ensure that all Mechanical engineering references are up to date and relevant.

General information
Organisation About SPIE Global Services Energy


As an international subsidiary of the SPIE Group present in around 20 countries in Europe, Africa, Asia Pacific, the Middle East and North America, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions.


Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint.

With 55,000 employees and a strong local presence, SPIE group achieved in 2024 consolidated revenue of €9.9 billion and consolidated EBITA of €712 million.


Reference 2025-39533


Position description Job title

Senior Inspection/Structural Engineer M/F

Contract type

Permanent contract

Contractual hours

Full time

Job description

We currently have an opportunity within SPIE Global Services Energy, Qatar for a :

Senior Inspection/Structural Engineer

ACCOUNTABILITIES

• Lead and execute asset integrity assessments and life extension studies for Structural elements.
• Ensure compliance with NOC and international standards (IEC, IEEE, API, ISO 55000).
• Define and implement proactive/reactive maintenance strategies.
• Support the development of integrity management systems and digital databases.
• Provide technical leadership and mentorship to junior engineers.
• Provide technical input to key stakeholders
• Act as Technical Authority / Technical Administrator (TADM) on behalf of M&I ensuring that all Structural studies and projects are carried out in accordance with NOC requirements
• Ensure NOC rules, specifications and procedures are followed, maintaining closed communication with all relevant departments
• Ensure

ACTIVITIES

• Contributing and assist the team lead to develop and maintain an incident free environment through maintaining a strong safety culture.
• Ensuring compliance with HSE (occupational) legislation, Company standards and procedures for continuous process, operational Safety & Plant Integrity.
• Conduct and define the most effective asset selection and strategy
• Identify critical structural assets for assessment
• Define maintenance strategies (proactive/reactive), Conduct RBI, FFS, and structural assessments.
• Define inspection scopes and review NDT results.
• Gather design, operational, and maintenance data
• Determine Designed End of Service Life (DEOSL) and verify actual End of Service Life (VEOSL)
• Perform the Asset Integrity Assessment
• Conduct data gap analysis and integrity risk reviews
• Set up integrity databases and digital dashboards
• Define execution timelines and contracting strategies
• Coordinate with 3rd-party engineering firms for detailed studies
• Execute and report on the Asset Integrity Assessment as well as the Life Extension studies
• Perform condition assessments, failure mode analysis, and life prediction modeling
• Review and validate 3rd-party reports and recommendations
• Prepare technical reports and presentations for senior management
• Support CAPEX/OPEX planning based on findings
• Visit offshore sites on task or project basis to enhance collaboration and supervision to sites to ensure successful delivery of job scopes
• Any other ad-hoc tasks as directed by line manager

Profile

• Bachelor’s in Civil/Structural/Mechanical Engineering.
• 10–15 years of experience working in an oil & gas operator, with at least 5 years in asset integrity or reliability engineering
• Skilled and experienced in working in a multi-cultural and highly technical specialized environment
• API 510/570/653, NACE, ASNT Level II/III.
• Experience with CMMS (SAP PM), PowerBI dashboards, and integrity management tools.

• API, NACE, ASNT, CSWIP

You will have a good level of computer literacy and be proficient in industry electrical software and systems and advance skills in Microsoft Office. You will need excellent communication and presentation skills in English both written and verbal in English.

Working at SPIE What can we offer you?

You will have a good level of computer literacy and be proficient in industry electrical software and systems and advance skills in Microsoft Office. You will need excellent communication and presentation skills in English both written and verbal in English.

Position location Location
Doha
Candidate criteria Minimum level of experience required

6 years or more

Required authorisations

Fit to work

valid H2S & T-BOSIET trainings

Languages

English (C-Professional working proficiency)

Our ambition Combining our differences

We offer long-term contract with attractive daily rate, insurance coverage, transportation & expat standard accommodation

#J-18808-Ljbffr

Job title Contract type

Permanent contract

Contractual hours

Full time

We currently have an opportunity within SPIE Global Services Energy, Qatar for a :

ACCOUNTABILITIES

• Lead and execute asset integrity assessments and life extension studies for Structural elements.
• Ensure compliance with NOC and international standards (IEC, IEEE, API, ISO 55000).
• Define and implement proactive/reactive maintenance strategies.
• Support the development of integrity management systems and digital databases.
• Provide technical leadership and mentorship to junior engineers.
• Provide technical input to key stakeholders
• Act as Technical Authority / Technical Administrator (TADM) on behalf of M&I ensuring that all Structural studies and projects are carried out in accordance with NOC requirements
• Ensure NOC rules, specifications and procedures are followed, maintaining closed communication with all relevant departments
• Ensure

ACTIVITIES

• Contributing and assist the team lead to develop and maintain an incident free environment through maintaining a strong safety culture.
• Ensuring compliance with HSE (occupational) legislation, Company standards and procedures for continuous process, operational Safety & Plant Integrity.
• Conduct and define the most effective asset selection and strategy
• Identify critical structural assets for assessment
• Define maintenance strategies (proactive/reactive), Conduct RBI, FFS, and structural assessments.
• Define inspection scopes and review NDT results.
• Gather design, operational, and maintenance data
• Determine Designed End of Service Life (DEOSL) and verify actual End of Service Life (VEOSL)
• Perform the Asset Integrity Assessment
• Conduct data gap analysis and integrity risk reviews
• Set up integrity databases and digital dashboards
• Define execution timelines and contracting strategies
• Coordinate with 3rd-party engineering firms for detailed studies
• Execute and report on the Asset Integrity Assessment as well as the Life Extension studies
• Perform condition assessments, failure mode analysis, and life prediction modeling
• Review and validate 3rd-party reports and recommendations
• Prepare technical reports and presentations for senior management
• Support CAPEX/OPEX planning based on findings
• Visit offshore sites on task or project basis to enhance collaboration and supervision to sites to ensure successful delivery of job scopes
• Any other ad-hoc tasks as directed by line manager

Profile

• Bachelor’s in Civil/Structural/Mechanical Engineering.
• 10–15 years of experience working in an oil & gas operator, with at least 5 years in asset integrity or reliability engineering
• Skilled and experienced in working in a multi-cultural and highly technical specialized environment
• API 510/570/653, NACE, ASNT Level II/III.
• Experience with CMMS (SAP PM), PowerBI dashboards, and integrity management tools.

You will have a good level of computer literacy and be proficient in industry electrical software and systems and advance skills in Microsoft Office. You will need excellent communication and presentation skills in English both written and verbal in English.

Working at SPIE What can we offer you?

You will have a good level of computer literacy and be proficient in industry electrical software and systems and advance skills in Microsoft Office. You will need excellent communication and presentation skills in English both written and verbal in English.

Location Minimum level of experience required

6 years or more

Required authorisations

Fit to work

Languages

English (C-Professional working proficiency)

We offer long-term contract with attractive daily rate, insurance coverage, transportation & expat standard accommodation

General information Organisation About SPIE Global Services Energy

Organisation About SPIE Global Services Energy

As an international subsidiary of the SPIE Group present in around 20 countries in Europe, Africa, Asia Pacific, the Middle East and North America, SPIE Global Services Energy operates across the entire energy production infrastructure value chain, from design to maintenance. SPIE Global Services Energy relies on an extensive local network to quickly deploy resources and meet its customers' needs in the safest possible conditions.

Drawing on the expertise of its 5,000 employees, SPIE Global Services Energy helps players in the oil, gas and renewable energies industries improve the technical performance of their infrastructure, increase their energy efficiency and reduce their carbon footprint.

With 55,000 employees and a strong local presence, SPIE group achieved in 2024 consolidated revenue of €9.9 billion and consolidated EBITA of €712 million.

#J-18808-Ljbffr