69 Quality Control jobs in Qatar

Note: This is regarding a long term contract, 2 to 4 years Note: Due to Visa limitations, your application will not be accepted if your is from Iran, Iraq, Sudan, Egypt, Israel, Congo, Afghanistan, Libya. Exception, if you are already a inside Qatar with a valid QID, transfer of sponsorship is possible! If you have valid QID and are Qatar , press 'NO' when asked for it. Overview: We are looking to hire a QC Inspector for a oil and gas operator in Doha, Qatar. Candidates must have a minimum of 10 years’ experience in a similar position, experience in GCC is desirable. Fluency in English is a must. Key Responsibilities: Implement the elements of the client’s management system applicable to your function

Ensure your safety and the safety of others who may be affected by the client’s business, whether the activity is under your direct control and proactively participate in all safety matters affecting the construction of the project

Prevent pollution to the environment, in the project

Co-ordinate the inspection and test requirements on behalf of the client

Undertake familiarization with Project and discipline-specific inspection documentation to ensure an understanding of the contract requirements

Familiar with international Codes, Standards and regularities (e.g. QCS, ACI, AISC, etc)

Implement quality inspection procedures on construction activities, suppliers, and subcontractors to ensure compliance with project specification

Ensure that the documentation generated by the inspections, tests, surveillance and surveys meet the requirements of the Project Quality Plan, ITPs and project requirement

Complete relevant forms and prepare reports on inspections and tests undertaken for in, and maintenance of, inspection records

Communicating effectively with the contractor, third parties and end users at your level

Ensure that all equipment used for measuring and testing is in calibration and such records are available

Assist construction personnel in developing the required quality documentation, including method statements, work procedures, inspection and test plans and inspection and test records

Assist construction personnel to identify problems and potential or actual nonconformances and to assist in proposing corrective and preventive actions

Liaise with other Field Supervisors and Contractor to be aware of planned and completed construction works to ensure civil tests are planned and performed

Assist Quality Engineer to inspect and review quality documents about Concrete Casting, Steel fixing, Anchor bolts, Grouting, Steel Structure erection, Block works, Soil & Excavation and material-receiving activities

Monitor Contractor’s Concrete Casting, Steel fixing, Anchor bolts, Grouting, Steel Structure erection, Block works, Soil & Excavation and Material-Receiving Quality Procedures implementation and QA/QC activities

Ensure all civil activities are performed according to Project requirements and that tests and reports are prepared, approved and included in documentation packages

Witness Site & Laboratory Tests related to civil activities

Monitor that materials and equipment are used in accordance with specifications

Carry out random checks on receiving-inspection of certified batch plants, mixers, lifting gears, etc

Check delivery documents against purchase orders, specifications and material certificates

Reject any material not meeting specifications or not bearing an authentic material certificate

Carry out random dimensional checks on materials

Follow-up on Corrective Actions to close out non-conformances

Monitor trends of non-compliance to client requirements and feedback on the status of the Contractor’s performance

Initiate Surveillance/NCR’s for QC Engineer’s approval

Requirements: Civil/Structural/Architecture degree and/or diploma with experience in Quality Control in the multidiscipline construction environment

Preferably having formal training in QC and membership with recognized charted or other professional institution

10 years’ experience in a similar position, experience in GCC is desirable

Sound working knowledge of QC aspects and various testing requirements related to major Oil & Gas/Tank Farm/Pipeline/Petrochemical construction projects (related to the job)

Ability to work well with contractor’s personnel and colleagues at all levels in multidisciplinary, and multicultural environment

BH-MS0881 Bounty Hunter World

#J-18808-Ljbffr

Note: This is regarding a long term contract, 2 to 4 yearsNote: Due to Visa limitations, your application will not be accepted if your is from Iran, Iraq, Sudan, Egypt, Israel, Congo, Afghanistan, Libya. Exception, if you are already a inside Qatar with a valid QID, transfer of sponsorship is possible! If you have valid QID and are Qatar , press 'NO' when asked for it.Overview:We are looking to hire a QC Inspector for a oil and gas operator in Doha, Qatar.Candidates must have a minimum of 10 years' experience in a similar position, experience in GCC is desirable.Fluency in English is a must.Key Responsibilities:Implement the elements of the client's management system applicable to your functionEnsure your safety and the safety of others who may be affected by the client's business, whether the activity is under your direct control and proactively participate in all safety matters affecting the construction of the projectPrevent pollution to the environment, in the projectCo-ordinate the inspection and test requirements on behalf of the clientUndertake familiarization with Project and discipline-specific inspection documentation to ensure an understanding of the contract requirementsFamiliar with international Codes, Standards and regularities (e.g. QCS, ACI, AISC, etc)Implement quality inspection procedures on construction activities, suppliers, and subcontractors to ensure compliance with project specificationEnsure that the documentation generated by the inspections, tests, surveillance and surveys meet the requirements of the Project Quality Plan, ITPs and project requirementComplete relevant forms and prepare reports on inspections and tests undertaken for in, and maintenance of, inspection recordsCommunicating effectively with the contractor, third parties and end users at your levelEnsure that all equipment used for measuring and testing is in calibration and such records are availableAssist construction personnel in developing the required quality documentation, including method statements, work procedures, inspection and test plans and inspection and test recordsAssist construction personnel to identify problems and potential or actual nonconformances and to assist in proposing corrective and preventive actionsLiaise with other Field Supervisors and Contractor to be aware of planned and completed construction works to ensure civil tests are planned and performedAssist Quality Engineer to inspect and review quality documents about Concrete Casting, Steel fixing, Anchor bolts, Grouting, Steel Structure erection, Block works, Soil & Excavation and material-receiving activitiesMonitor Contractor's Concrete Casting, Steel fixing, Anchor bolts, Grouting, Steel Structure erection, Block works, Soil & Excavation and Material-Receiving Quality Procedures implementation and QA/QC activitiesEnsure all civil activities are performed according to Project requirements and that tests and reports are prepared, approved and included in documentation packagesWitness Site & Laboratory Tests related to civil activitiesMonitor that materials and equipment are used in accordance with specificationsCarry out random checks on receiving-inspection of certified batch plants, mixers, lifting gears, etcCheck delivery documents against purchase orders, specifications and material certificatesReject any material not meeting specifications or not bearing an authentic material certificateCarry out random dimensional checks on materialsFollow-up on Corrective Actions to close out non-conformancesMonitor trends of non-compliance to client requirements and feedback on the status of the Contractor's performanceInitiate Surveillance/NCR's for QC Engineer's approvalRequirements:Civil/Structural/Architecture degree and/or diploma with experience in Quality Control in the multidiscipline construction environmentPreferably having formal training in QC and membership with recognized charted or other professional institution10 years' experience in a similar position, experience in GCC is desirableSound working knowledge of QC aspects and various testing requirements related to major Oil & Gas/Tank Farm/Pipeline/Petrochemical construction projects (related to the job)Ability to work well with contractor's personnel and colleagues at all levels in multidisciplinary, and multicultural environmentBH-MS0881Bounty Hunter World

**Key Responsibilities**:

- **Quality Assurance**:

- Implement and maintain quality control systems to ensure compliance with company standards and regulatory requirements.
- Monitor production processes to ensure products meet quality standards.
- Conduct regular inspections and audits to identify areas for improvement.
- **HACCP Compliance**:

- Develop, implement, and monitor HACCP plans to ensure food safety.
- Conduct regular HACCP audits and ensure corrective actions are taken promptly.
- Provide training and guidance to staff on HACCP principles and practices.
- **Documentation and Reporting**:

- Maintain accurate records of quality control activities and findings.
- Prepare and present reports on quality control performance and issues.
- Ensure all documentation complies with industry standards and regulations.
- **Continuous Improvement**:

- Identify opportunities for process improvements and implement solutions.
- Stay updated with industry trends, standards, and regulations.
- Lead initiatives to enhance product quality and operational efficiency.
- **Team Collaboration**:

- Work closely with production, procurement, and other relevant departments to ensure quality standards are met.
- Provide support and guidance to team members on quality control issues.

**Qualifications**:

- **Experience**:

- Minimum of 2-3 years of experience in a quality control role within the F&B industry.
- Proven experience in the hospitality sector is an advantage.
- **Certification**:

- HACCP certification is mandatory.
- **Knowledge**:

- Strong understanding of quality control principles and practices in the F&B industry.
- Good knowledge of F&B and hospitality industry standards and regulations.
- **Skills**:

- Excellent attention to detail and problem-solving skills.
- Strong communication and interpersonal skills.
- Ability to work independently and as part of a team.

**Job Types**: Full-time, Permanent

Pay: QAR3,500.00 per month

Quality Assurance Quality Control Engineer - Civil (Interior Fit-out)

Responsible for implementing the QC/QA plan and associated directives to support the plan. Develops and manages quality control and assurance procedures to ensure contracts meet specifications.

Main Responsibilities:

1. Develop written procedures for quality control/quality assurance.
2. Perform site and laboratory tests to ensure material and work conformity with contract specifications.
3. Supervise construction contracts, including quantity measurement, quality, variation, and payments.
4. Ensure contractor compliance with work specifications.
5. Develop standard documentation for construction works and quality assurance.
6. Review and improve existing standard documentation for the operations center.
7. Assess work activities to determine appropriate construction methods.
8. Implement and maintain ITC's quality systems on-site.
9. Report deviations from approved drawings, specifications, and methods.
10. Prepare daily/monthly QA/QC reports.
11. Inspect incoming materials against approved samples and specifications.
12. Conduct site inspections and audits, recommending corrective actions.
13. Develop and get approval for project-specific quality plans, method statements, and inspection/test plans.
14. Conduct internal inspections and oversee rectifications.
15. Report deviations and monitor corrective actions, issuing NCRs as needed.
16. Identify quality issues and propose improvements.
17. Train site workers on QA/QC activities.
18. Maintain calibration registers and support audits.
19. Manage NCR logs, corrective actions, and closure.
20. Coordinate site inspections and approvals with consultants.
21. Develop preventive action plans and internal punch lists.
22. Assist in punch list preparation and closure.

Qualifications

1. Bachelor's degree or higher qualification in a relevant field.
2. UPDA certification preferred.
3. Minimum 5 years of relevant experience, GCC experience preferred.

Seniority level

Mid-Senior level

Employment type

Full-time

Job function

Quality Assurance

Industries

Furniture and Home Furnishings Manufacturing

This job is active and not expired.

Quality Assurance Quality Control Engineer - Civil (Interior Fit-out)

Responsible for implementing the QC/QA plan and associated directives to support the plan. Develops and manages quality control and assurance procedures to ensure contracts meet specifications.

Main Responsibilities:

1. Develop written procedures for quality control/quality assurance.
2. Perform site and laboratory tests to ensure material and work conformity with contract specifications.
3. Supervise construction contracts, including quantity measurement, quality, variation, and payments.
4. Ensure contractor compliance with work specifications.
5. Develop standard documentation for construction works and quality assurance.
6. Review and improve existing standard documentation for the operations center.
7. Assess work activities to determine appropriate construction methods.
8. Implement and maintain ITC’s quality systems on-site.
9. Report deviations from approved drawings, specifications, and methods.
10. Prepare daily/monthly QA/QC reports.
11. Inspect incoming materials against approved samples and specifications.
12. Conduct site inspections and audits, recommending corrective actions.
13. Develop and get approval for project-specific quality plans, method statements, and inspection/test plans.
14. Conduct internal inspections and oversee rectifications.
15. Report deviations and monitor corrective actions, issuing NCRs as needed.
16. Identify quality issues and propose improvements.
17. Train site workers on QA/QC activities.
18. Maintain calibration registers and support audits.
19. Manage NCR logs, corrective actions, and closure.
20. Coordinate site inspections and approvals with consultants.
21. Develop preventive action plans and internal punch lists.
22. Assist in punch list preparation and closure.

Qualifications

1. Bachelor’s degree or higher qualification in a relevant field.
2. UPDA certification preferred.
3. Minimum 5 years of relevant experience, GCC experience preferred.

Seniority level

Mid-Senior level

Employment type

Full-time

Job function

Quality Assurance

Industries

Furniture and Home Furnishings Manufacturing

This job is active and not expired.

#J-18808-Ljbffr

Quality Assurance Quality Control Engineer - Civil (Interior Fit-out) Responsible for implementing the QC/QA plan and associated directives to support the plan. Develops and manages quality control and assurance procedures to ensure contracts meet specifications.

Main Responsibilities:

Develop written procedures for quality control/quality assurance.

Perform site and laboratory tests to ensure material and work conformity with contract specifications.

Supervise construction contracts, including quantity measurement, quality, variation, and payments.

Ensure contractor compliance with work specifications.

Develop standard documentation for construction works and quality assurance.

Review and improve existing standard documentation for the operations center.

Assess work activities to determine appropriate construction methods.

Implement and maintain ITC’s quality systems on-site.

Report deviations from approved drawings, specifications, and methods.

Prepare daily/monthly QA/QC reports.

Inspect incoming materials against approved samples and specifications.

Conduct site inspections and audits, recommending corrective actions.

Develop and get approval for project-specific quality plans, method statements, and inspection/test plans.

Conduct internal inspections and oversee rectifications.

Report deviations and monitor corrective actions, issuing NCRs as needed.

Identify quality issues and propose improvements.

Train site workers on QA/QC activities.

Maintain calibration registers and support audits.

Manage NCR logs, corrective actions, and closure.

Coordinate site inspections and approvals with consultants.

Develop preventive action plans and internal punch lists.

Assist in punch list preparation and closure.

Qualifications

Bachelor’s degree or higher qualification in a relevant field.

UPDA certification preferred.

Minimum 5 years of relevant experience, GCC experience preferred.

Seniority level Mid-Senior level

Employment type Full-time

Job function Quality Assurance

Industries Furniture and Home Furnishings Manufacturing

This job is active and not expired.

#J-18808-Ljbffr

Quality Assurance Quality Control Engineer - Civil (Interior Fit-out)
Responsible for implementing the QC/QA plan and associated directives to support the plan. Develops and manages quality control and assurance procedures to ensure contracts meet specifications.Main Responsibilities:Develop written procedures for quality control/quality assurance.Perform site and laboratory tests to ensure material and work conformity with contract specifications.Supervise construction contracts, including quantity measurement, quality, variation, and payments.Ensure contractor compliance with work specifications.Develop standard documentation for construction works and quality assurance.Review and improve existing standard documentation for the operations center.Assess work activities to determine appropriate construction methods.Implement and maintain ITC’s quality systems on-site.Report deviations from approved drawings, specifications, and methods.Prepare daily/monthly QA/QC reports.Inspect incoming materials against approved samples and specifications.Conduct site inspections and audits, recommending corrective actions.Develop and get approval for project-specific quality plans, method statements, and inspection/test plans.Conduct internal inspections and oversee rectifications.Report deviations and monitor corrective actions, issuing NCRs as needed.Identify quality issues and propose improvements.Train site workers on QA/QC activities.Maintain calibration registers and support audits.Manage NCR logs, corrective actions, and closure.Coordinate site inspections and approvals with consultants.Develop preventive action plans and internal punch lists.Assist in punch list preparation and closure.QualificationsBachelor’s degree or higher qualification in a relevant field.UPDA certification preferred.Minimum 5 years of relevant experience, GCC experience preferred.Seniority level
Mid-Senior levelEmployment type
Full-timeJob function
Quality AssuranceIndustries
Furniture and Home Furnishings ManufacturingThis job is active and not expired.#J-18808-Ljbffr

**Quality Control Officer -FMCG**

**Overall Purpose of the Role**:

- Responsible for ensuring that the products produced meet quality standards required to minimize quality costs and maximize customer satisfaction whilst ensuring that procedures and processes are adhered to.
- Ensure incoming materials meet required quality standards.
- Responsible for identifying and raising quality issues and for speedily resolving them to ensure zero impact to the customer.
- Support new product introductions to ensure the robustness of product builds.
- Work in a team environment to develop and implement best practices that emphasize defect prevention, reduction in variation and waste and provide for continuous improvements in meeting all customer requirements.
- Manage the customer specific requirements and offer technical support.
- Responsible for multiple highly complex major projects requiring innovative original solutions where results are key to successful completion of major projects.
- Work mostly independently with mínimal supervision and work is reviewed at project milestones and/or on completion by Senior Management.

**General and Task Management**
- Manage all quality-related issues within the manufacturing team (e.g. internal, supplier, customer and customer warranty)
- Identify root cause and instigate permanent corrective actions for product quality issues
- Work with internal and external stakeholders to resolve quality issues that arise as quickly and efficiently as possible to prevent compromising quality and safety standards
- Carry out product and process auditing
- Ensure control plans and associated documentation are implemented effectively and maintained
- Monitor and report on quality-related key performance indicators including scrap monitoring, rework levels, parts per million (PPM) figures
- Stop production in the event of manufacture of unacceptable goods/processes
- Write product test procedures
- Undertake special projects as required
- Assist with training of quality awareness
- Report on Key Performance Indicators (KPIs) in order to adhere to process and prevent occurrence of any non-conformity relating to product, process or system
- Assist with first off sample approvals
- Promote the use of customer preferred techniques for continuous improvement such as Six-Sigma, (Error Proofing), and Measurement System Analysis
- Participate in cross-functional teams in the development of new products or changes related to current products in meeting customer requirements
- Manage the Supplier Key Performance Indicators (KPIs)
- Manage and coordinate customer PPM (Parts per Million), supplier PPM, supplier problem solving on time, cost recovery and supplier warranty indicators
- Lead quality audits
- Keep up with current and developing manufacturing and engineering trends that concern product quality
- Undertake special projects as required
- Contribute to continuous improvement activities
- Quality control of work by appropriate reviews
- Support and lead process improvement activities
- Write reports and present progress at project meetings and to clients
- Achieve goals within budget
- Conduct bench marking studies to determine best practices/designs and future trends
- Plan projects or sub tasks so they may be tracked and presented
- Attend various meetings and action/communicate instructions

**Job Requirements**

**Experience and Qualifications**:

- Experience required in product quality role (min 2 years)
- Preferably experienced in quality role within FMCG
- Experience in process validation desirable
- Ability to communicate and work with people inside and outside the business as necessary to execute your responsibilities
- Self motivated with capable decision making ability
- Work independently and is reviewed infrequently with mínimal supervision
- Self-supervising within the guidance and expectations of divisional management
- Knowledge of quality measurement
- Lean Manufacturing knowledge
- Knowledge of TS16949 and ISO9000
- Understanding of ISO14001 and Health and Safety practices
- Understanding of engineering drawing sand manufacturing processes
- Ability to work in a diverse and dynamic environment
- Planning and prioritizing activities
- Good communication and interpersonal skills
- Negotiation skills
- Ability to present data effectively
- Problem-solving skills
- Team working skills
- Analytical skills
- Understanding of cost and financial impacts
- **Must have NOC**
- **Immediate Joiner**

Ability to commute/relocate:

- Doha: Reliably commute or planning to relocate before starting work (required)

Select how often (in days) to receive an alert: Create Alert

Quality Control Materials Inspector (QFAB)

Job Requisition No.: 21939

Category: Shipyard

Position : Quality Control Materials Inspector

Reports To: Senior Quality Inspector

Company : Qatar Fabrication Company

Location : Ras Laffan / Qatar

Primary Functions:

• Determine conformity of material received to customer specification and relevant code/standard through independent inspection and tests in accordance with the Project Quality Plan (PQP). Identify nonconformity for

Tasks and Responsibilities:

• Assure material received in accordance with the PO, ITP, and Technical Specification, Codes / Material standards to determine conformity. All inspection results need to be documented on warehouse checklist and if nonconformity exists, suitable documentation (OS&D, NCR) shall be issued to establish corrective and preventive action.
• Perform receiving inspections such as visual, dimensional, verification of markings, review of Material Test Certificates / Inspection Release Notes in accordance with project specifications, codes / material standard and scope of work as noted in the PO and ITPs.
• Provide interpretation of applicable code/material standards and customer requirements. Any deviation, clarification and waivers deemed necessary shall be notified to the Senior Quality Inspector - Materials for generating change management process such as Site Query, Technical Query, Technical deviation, waivers etc.,
• Identify any additional testing requirement and arrange/coordinate with approved testing laboratories for testing with PMT approval. Participate in witnessing the lab testing as and when required.
• Coordinate / Interface with Warehouse, Purchasing, PMT, Operations, Certifying Authority, Client, and subcontractor assuring conformity to project specifications.
• Liaise with customer representatives ensuring product conformity and stage release for each activity denoted in the PO/ITP.
• Liaise with PMT/Buyers and Expeditors for quick resolution of OS&D. Attend OS&D meetings for the assigned project.
• Attend Joint Equipment Inspection as per project requirements.
• Visit vendor premises and conduct vendor inspections as and when required, as per PO/ITP.
• Exercise proactive approach in prevention of a technical problem by interaction with Purchasing, Engineers, and Management personnel.
• Conduct routine internal audits to assess the effectiveness of quality system outlined in the PQP/ITP.
• Participate in Toolbox Talks conducted in Warehouse to highlight the quality requirements and non- conformances noted during inspection.
• Conduct Quality Walkthroughs to ensure proper material storage and preservation.
• Notify all quality related concerns to the Senior Quality Inspector - Materials on regular basis.
• Liaise with Buyers to ensure Mill authenticity of materials received from Stockiest.
• Carry out advance MTC review (Supplier Materials Details) of stockiest materials to avoid OS&Ds after material receiving.

Qualifications, Experience and Skills

Qualifications:

• Bachelor's Degree / Diploma in Mechanical / Metallurgical/ Electrical & Instrumentation

Experience:

• 5+ years Quality control or related experience in Weld, Material, E&I Inspection.